Used Ski Grinding Machine for sale (65,371)

Condition: used, Year of construction: 2000, centre distance 1000 mm grinding length 1000 mm centre height 300 mm Control Siemens 840 800 kg weight of the machine ca. 6,7 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Rjdpfx Ahoynbi Ievjbw Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system Rsdexc Nyvjpfx Ahvjbw An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, 1500 x 3000, 2017 model, made in Taiwan Redpfoyxwfuox Ahvobw

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety Rbjdpeywcl Rsfx Ahvow and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: Rbjdpfoq I N H Nsx Ahvew - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. Rbjdpoq Nf Uwsfx Ahvew 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: good (used), Year of construction: 2011, center height: 500 mm, grinding wheel diameter: 200 mm, OKAMOTO 250 NCB CNC cylindrical grinder. Exact technical description can be seen in the pictures. Year of manufacture: 2011. Rbedpsywcb Sefx Ahvjw

Condition: new, grinding band dimension 150 x 2000 mm Redpfeyv N Agjx Ahvebw band speed 33 m/sec weight of the machine ca. 105 kg engine output 4 kW turning speeds 2800 U/min Accessories / equipment: - Vibration-free running smoothness - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: Rbodpfx Aoyv Nb Njhvsw - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Rodpfx Aoyv Iqvjhvebw Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sek. total power requirement 3 kW weight of the machine ca. 95 kg turning speeds 2800 U/min Standard equipment: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment Rbodpfeyv Nw Rsx Ahvew - surface grinding pad

Condition: new, band speed 33 m/s grinding band dimension 75 x 2000 mm total power requirement 3 kW weight of the machine ca. 75 kg turning speeds 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears Rbodpfx Asyv Nvgshvew - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)

Condition: not inspected (used), Year of construction: 1993, machine/vehicle number: 101472, ● Terms of delivery: Free loaded onto truck ● Location: 42477 Radevormwald Rodpfx Ajyv Hduehvebw ● Availability: By arrangement – Collection of the goods is scheduled for 06/05/2026. Unfortunately, collection outside this period cannot be considered. ● Payment terms: Advance payment by bank transfer ● Internal no.: DÄ27 ● Inspection under power: Yes Technical data: ● Magnetic chuck approx.: 500 x 250 mm ● Grinding length approx.: 600 mm ● Grinding width approx.: 250 mm ● Grinding height approx.: 500 mm Scope of delivery: ● Various grinding wheels as per pictures Dimensions & weights: ● Installation dimensions L x W x H approx.: 2200 x 1700 x 2000 mm ● Weight approx.: 1500 kg Info: There is a small chipped area on the lower handwheel; however, this does not affect functionality. If you have any questions or would like to arrange a viewing, please feel free to contact us! Additional notes: ►Transport to the destination can be offered upon request ►The offer price is net plus VAT ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale is strictly to business customers only❗

Year of construction: 1996, condition: ready for operation (used), A knife surface grinding machine Reform without coolant, separation and filtration system is available. Grinding length: 1300mm, magnetic table dimensions X/Y/Z: 1350mm/150mm/1300mm, grinding spindle power: 5.5kW, table swivel: +/-90°, machine dimensions X/Y/Z: approx. 3000mm/1000mm/1500mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Rsdpfoyxgq Hjx Ahvebw

Year of construction: 1990, condition: ready for operation (used), Table dimensions X/Y: 900mm/350mm, magnet dimensions X/Y: 600mm/350mm, max. workpiece height: 375mm, max. table load: 300kg. Machine dimensions X/Y/Z: 3200mm/2600mm/2400mm, weight: approx. 400kg. Documentation available. An on-site inspection is possible. Rodpeyxgrqsfx Ahvebw

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, grinding length: 500 mm, grinding width: 200 mm, grinding wheel diameter: 255 mm, Machine in very good condition, not refurbished, original. Out of use for 10 years. Has only been a backup machine. Rbodpfxjyxfv Us Ahvow

Condition: excellent (used), Year of construction: 1998, Erwin Junker BUAJ BN29C CNC Universal Cylindrical Grinder Excellent condition Can be viewed underpower and demonstrating if you wish to visit. Year 1998 Fanuc series 35i CNC Control Weight 2800kgs Dimensions approx 3000mm x 1850mm x 1800mm Specification - Distance between centres - 800mm Centre table clearance 150mm Work piece weight between centres, max 120kg Machine working capacity IT4 ISO Rbodpfxsyvupxo Ahvsw Wheelhead Grinding wheel, max diameter - 400mm Grinding wheel, max, width - 63mm Grinding wheel, clamping diameter - 127mm Motor power - 5.5kW Grinding wheel, max. peripheral speed - 45m/s Wheel head, path of adjustment - 300mm Wheel head, adjustment angle - +45°/-15° Workhead Spindle taper - MK5 Spindle, stepless speed control - 23-291 or 56- 700rpm Work head, adjustment angle - 90° Tailstock Taper - MK4 Tailstock barrel, stroke 30mm Taper ratio, fine adjustment +/-0.15mm Longitudinal feed Table travel 756mm Table, working travel speed 0÷7.5m/min Top table, swiveling +/8°30

Condition: good (used), functionality: fully functional, total length: 1,300 mm, total height: 1,800 mm, total width: 800 mm, center height: 150 mm, overall weight: 700 kg, HENNINGER ZS 160 centre grinding machine - Centre distance: approx. 800 mm Redpfxjyvtmis Ahvjbw Note: The item must be collected on a binding basis between 12.05. and 22.05.2026, on a date yet to be coordinated. FCA D-74821 Mosbach – loaded onto truck

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Type PSG 63 – UAN Year of manufacture: 1988 Rsdpfx Ahoyxdaxsvsbw Grinding length: 600 mm Grinding width: 320 mm Max. workpiece height: 500 mm Table travel (longitudinal): 750 mm Table travel (cross): 340 mm Grinding wheel diameter: 350 mm Grinding wheel width: 40 mm Spindle speed: 1500 rpm Rapid vertical feed: 400 mm/min Power: 3.7 kW Automatic feed Magnetic chuck Coolant system Weight: 2500 kg Price: EUR 2,000—plus VAT, ex location

Condition: excellent (used), Year of construction: 1993, JUNG JF 600 Surface Grinding Machine Jung JF 600, Year of Manufacture 1993, Overhauled in 2018, Excellent Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Rodpjyxdaljfx Ahvsbw Technical Specifications: - Year of Manufacture: 1993 / 2018 - Table length: 600 mm - Table width: 250 mm Axis movement: - Longitudinal travel (X-axis): 600 mm - Cross travel (Z-axis): 280 mm - Maximum distance between table and spindle center: 500 mm - Grinding length: 600 mm Table speed: - Infinitely variable: from 1 m/min to 24 m/min - Creep feed: from 0.03 m/min to 0.40 m/min Automatic cross feed: - Infinitely variable: from 0.010 mm/min to 10,000 mm/min Connection 50 Hz 3-phase: 380 Volt Grinding spindle motor: 9.5 kW Total power consumption: 13 kVA Machine weight approx.: 2,500 kg Machine dimensions: - Length: 2,910 mm - Width: 2,320 mm - Height: 1,840 mm Various accessories: - Coolant system About the machine: Offered is a Jung JF 600 surface grinding machine. This universal surface grinder is in very good original condition. It comes from a facility where it was only used sparingly for training purposes. The machine features a very user-friendly control system. The grinding travel of 600 mm on the longitudinal axis and a cross travel of 300 mm make this model ideal for toolmaking, jig manufacturing, and small batch production. A comprehensive standard configuration and straightforward operation are hallmarks of this machine series. The robust design of the spindle head and the double V-guides on both the longitudinal and cross axes ensure long-term precision. The intuitive operation of the controls makes handling easy and significantly increases productivity. The guideways are regularly lubricated via a central lubrication system. The Jung has been mechanically and electrically inspected by us. You are welcome to view and test the Jung while powered at our site. Further surface grinding machines from well-known manufacturers can be found on our website.

Condition: good (used), Year of construction: 1983, operating hours: 15,870 h, functionality: fully functional, grinding length: 600 mm, grinding width: 200 mm, table load: 100 kg, overall weight: 2,000 kg, distance stand to spindle center: 500 mm, input voltage: 400 V, Surface grinding machine Jung JF520 Year of manufacture: 1983 Operating hours: 15,870 h Grinding area: 600x200 mm Distance table to spindle center: 500 mm Max. table load: 100 kg Automatic table cross-feed Automatic grinding head height adjustment Rapid traverse Central lubrication Required space: 3100x1700 mm Weight approx. 2000 kg Rodpfx Ahjyxcm Revsbw - Complete documentation - Extensive accessories: Grinding wheels Dresser Angle table Balancing scale

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, Rsdpfx Ahodgk H Aevsbw halbautom. Wuchtsystem Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university environment and was only used very sparingly. All cables and hoses in the wet area have been replaced. It has extremely low operating hours. As we specialize in Karstens cylindrical grinding machines, we can offer you full service (electrical and mechanical) for the machine after purchase. Technical Data: Rbjdpfjh Rit Esx Ahvow Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 70 kg (between centers, cantilevered), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: Morse Taper 4, infinitely variable speed 30–450 rpm, swiveling range 0–90° Tailstock: Morse Taper 4, quill stroke 45 mm Tailstock rest beside Z-axis table Quill force: 200–600 N Table swivel: 12.5 degrees Travel of infeed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3,500 kg Infeed drive by DC motor Air cushion-supported rapid adjustment of the grinding spindle headstock for fast and safe positioning at the grinding station. Separate drives for spindles for external and internal grinding. Fully automatic operation cycle, feed movement controlled via rotary switch: Rapid advance, rapid retraction, grinding mode, feed stop, mym-feed adjustment. Automatic longitudinal grinding cycle Central coolant supply for all grinding stations Workpiece headstock with infinitely adjustable drive for rotating and lockable spindle. Infeed control for longitudinal grinding and plunge grinding, settings for retraction, feed amounts, feeds, spark-out times, idle strokes. Digital readout for X-axis by Heidenhain Paper band filter unit can be offered on request. Comparable to Weiss/ EMAG/ GP-cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Rbedpfx Ahjtqf Rzevsw Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: new, We offer all types of spare parts for your conventional or CNC Karstens/GP cylindrical grinding machine, including components for your tailstock, workpiece spindle head, grinding spindle head, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed control systems—new and used—as well as reversing blocks for the Z axis on an exchange basis. Also suitable for similar Weiss/EMAG/GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna. Rsdpfx Aheraibvsvebw