Used Sk40 for sale (683)

Condition: used, Year of construction: 2021, HAAS MINIMILL 2 Year: 2021 Table size: 1016 mm x 356 mm X-axis travel: 508 mm Y-axis travel: 406 mm Z-axis travel: 356 mm Spindle: SK40 Spindle speed: 0-6000 rpm Iedpfoyaqtaox Ah Netb 2x Renishaw probes Tool changer: 20 tools Approximate weight: 2313 kg

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm Itodewm Rrwepfx Ah Nsb – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: used, Year of construction: 2002, x-travel 560 mm y-travel 270 mm z-travel 340 mm Itjdpfx Ahjv H Eryj Nob table surface area 1000x230 mm tool adaptor SK40 total power requirement 4 kW weight of the machine ca. 1,5 t required space 1,5 x 1,5 x 1,6 m

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). Ijdev Nxbyspfx Ah Notb TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Itjdpfxsvt Amuj Ah Nob Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm Itsdpfx Aox Uz Apsh Nob y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm Ijdpfxsx Uz Avj Ah Nstb y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,051 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, This 3-axis SPINNER VC 1000 was manufactured in 2011. It features a Siemens 840DE-SolutionLine control, a 15" color screen, and a high-speed milling spindle up to 12,000 rpm. The machine offers X=1000 mm, Y=650 mm, Z=650 mm travels, and a rapid tool changer for 24 tools. Ideal for precise and efficient machining. If you are looking to get high-quality milling capabilities consider the SPINNER VC 1000 machine we have for sale. Contact us for more information. • Milling spindle up to 12000 rpm with "in-line" direct drive • Travels: X=1000 mm, Y=650 mm, Z=650 mm • Linear guides in all three axes • Tool taper size 40 according to DIN 69871-A • High-speed automatic tool changer for 24 tools • Spindle taper blow-out device • Full splash guard enclosure • Work area light • Chip conveyor VC 1000-HS • Coolant transfer to tool according to DIN 69871A • High-pressure pump and gravity paper filter with capacitive level switch • Tool holder SK40 for TC 50 touch probe Itsdex Ut Hgspfx Ah Nob

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Itedpfx Aox T Dgneh Nsb • Internal coolant supply • Chip conveyor Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2011, Working travels 1020 x 560 x 600 mm Table size 1000 x 560 mm Spindle taper SK40 Spindle speeds 100-10'000 rpm Tool changer 40 Pos. Control HEIDENHAIN iTNC-530 3D Measuring tracer Misc.accessories MARCELS MASCHINEN CH Itsdorivirspfx Ah Nsb

Condition: excellent (used), Year of construction: 2002, operating hours: 65,000 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 26 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 45 kVA, controller manufacturer: Heidenhain, controller model: 530, total height: 2,200 mm, total length: 3,500 mm, total width: 2,700 mm, table width: 1,000 mm, table length: 600 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,700 h, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine includes: Itedsyat Tpspfx Ah Njb - 3D probe - Tool measurement - Extraction unit - Screw conveyor A spindle service was carried out in 2025 Tool holder SK40 (not included in the scope of delivery) without vise no internal coolant (IKZ) Overall, a truly well-maintained machine with few spindle hours. Can be inspected under power at the user’s site.

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale. Itjdpfx Ahsx Ipute Nob

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Itedpoyatkbjfx Ah Nob Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm Itodpex Icyvefx Ah Neb -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, - ULTIMAX 4 control - toolchanger for 24 tools - chip screw - electronical hand wheel - coolant device Iodpfx Asx Hfnyjh Nstb - measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30/30/20 m/min Gewicht der Maschine ca. / weight 4300 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Working Area Travel X: 820 mm Travel Y: 550 mm Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Tool holder: SK40 NC Rotary Table Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Equipment Chip conveyor Coolant supply Direct path measuring system Through-spindle air 5-axis simultaneous capability Workpiece measurement Tool measurement High-pressure coolant (IKZ) Iodpfxoyap Tfs Ah Njtb

Condition: like new (used), Year of construction: 2023, operating hours: 3,290 h, functionality: fully functional, machine/vehicle number: 10002197, Hartford LG 1570 — Specifications • Machine type: CNC machining center (vertical machining center) • Make: Hartford • Model: LG 1570 • Year: 2023 • Serial No.: 10002197 • Control: Heidenhain Axes • 3-axis Table • Table size: 1,600 x 700 mm Travels Isdpfx Aeyap Agsh Notb • X-axis: 1,500 mm • Y-axis: 700 mm • Z-axis: 650 mm Spindle / tool interface • Tool taper: SK40 • Spindle speed: up to 12,000 rpm • Spindle motor: 11 kW Tool changer • 40-position automatic tool changer Workpiece capacity • Max. workpiece weight: 1,000 kg Features / equipment • Coolant system • Cyclone filter extraction unit • Chip separator and chip conveyor Hours (read) • Total hours: 3,290 h • Cutting/milling time: 2,145 h Weight • 9,227 kg Overall dimensions • 4,750 x 3,400 x 3,300 mm (as provided; originally stated in cm) Condition / note • A decoder is defective and still needs to be replaced

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, -CNC control Heidenhain TNC620 -60+1-fold automatic tool changer -chip conveyor Itedpfjx Tn A Hsx Ah Nob -coolant through spindle device (22bar) -direct position measuring system in xyz -measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1150 mm Verfahrweg Y / Y-Travel 620 mm Verfahrweg Z / Z-Travel 600 mm Tischgröße / table size 1400x620 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 60+1 fach / fold Eilgang / rapid feed 48 m/min Antriebsleistung Spindel / drive capacity spindle 19 kW Gewicht der Maschine ca. / weight 8300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Iedpfxjx Tg Sto Ah Notb Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: >> HS 401 line control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake Itodpfx Aov Ed U Deh Neb >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Technical Data: - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm - Infinitely variable feed: 0–2000 mm/min - Rapid traverse (X and Y axis): 5000 mm/min - Z axis: 4000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Power rating at 100% duty cycle Accessories and Equipment: Ijdpswz Eu Nefx Ah Njtb - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control Iedsv Rppkepfx Ah Netb >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain in special paint light gray !!! Technical data: >> Year of construction 1987 Machine no. 2203-2772 >> Rigid angle table >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device >> Chip tray >> Central lubrication To the machine : Itodsvg Ewcopfx Ah Nsb We are offering a Deckel FP4M universal milling machine in very good condition. The machine has little crank play and all spindles can be moved easily and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the machine under power on site.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 path control in very good CONDITION CE compliant!! Technical data: >> Year of manufacture 2006 Machine-No. 348013 >> Rigid angle table >> Speed: stepless up to 4500 rpm >> Feed stepless in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Itsdpfxswrhxfs Ah Njb Z axis 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 path control is being offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann live on site under power.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 310 path control Very good CONDITION CE-compliant!! Technical data: >> Year of manufacture 2004 Machine No. 370506 >> Milling table clamping surface 800 x 425 mm Clamping slots 6 Slot width 14 H 7 Slot distance 63 mm Maximum load 300 kg >> Speeds up to 4500 rpm >> Feed range up to 2000 mm/min. Rapid traverse up to 5000 mm/min. >> Travel distances X/Y/Z: 600/400/400 mm Itedpfx Aewpkchoh Nsb >> Vertical quill and horizontal quill - SK40 >> Hydraulic drawbar system >> Weight approx. 2000 Kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 KW Accessories and equipment: >> Heidenhain TNC 310 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Electronic handwheel >> Heidenhain probe >> Technical documentation, spare part diagrams, operating manual >> Full protection cabin >> Coolant system About the machine: A Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 310 path control is being offered. This universal milling machine is in very good condition. A very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very simple thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann on site under power.