Used Sircular Saw for sale (6,437)

Condition: excellent (used), HSS saw grinder SCHMIDT TEMPO model ECE45 Kfedpjx Hp Tmefx Affsa

Condition: used, Year of construction: 2015, cutting diameter 225 mm saw band length 2450 mm cutting width 240 mm dimensions of saw-band 2450 x 27 x 0,9 mm capacity 90 degrees: flat 240 x 160 mm capacity 90 degrees: square 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 155 x 115 mm capacity 45 degrees: square 140 mm capacity 60 degrees: round 90 mm capacity 60 degrees: flat 90 x 90 mm capacity 60 degrees: square 90 mm weight of the machine ca. 240 kg Kjdpfxsx Hp Dxe Affefa Features: - Manual band saw machine - One-sided miter - Automatic lowering of the saw bow - Cuts from 0° to 60° left - Coolant device

Condition: used, Year of construction: 1995, saw blade diameter 450 mm cutting diameter 130 mm cutting width 240 mm Cutting height 130 mm speed for saw blade 15 / 35 U/min weight of the machine ca. 0,85 kg dimensions of the machine ca. 1,2 x 1,2 x 1,85 m Cold circular saw with - Mitering device 45°/60° - Coolant system - 2 saw blades Ksdpfx Asx I Sfueffjfa

Condition: excellent (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 104000031, The machine is in very good condition. Kedpfox I Rtqsx Affofa

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw, 320 cm sliding table, Vacuum suction cups in the table, Saw aggregate tilting 0-45 degrees, Electronic, motor-driven tilt and height adjustment of saw blade, Right-side fence with motorized adjustment up to 1340 mm, Electronically adjustable 3-axis scorer, 5.5 kW vario motor, speed adjustable via frequency inverter, Kfedpfsxvc Dhex Affea Maximum blade diameter 500 mm, LED lighting for the scorer, Used machine, in very good condition, Few operating hours.

Condition: used, Year of construction: 1980, total width: 5,300 mm, total length: 7,300 mm, total height: 2,100 mm, The machine has been dismantled and is in storage. Kfedpfsxr Rpwex Affoa

Condition: excellent (used), Carbide saw grinder VOLLMER model CHD350 Kfsdpfx Afsx Hp Scsfea

Condition: not inspected (used), Year of construction: 1981, functionality: unexamined, machine/vehicle number: 3124, Edging saw Esterer DKV-5S The machine has already been dismantled Year of manufacture: 1981 55 kW saw motor Without electrical installation Kjdpsuy Ib Iofx Affsfa With extraction system ASV/B Year of manufacture: 1981 The machine is being sold as is.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Fully automatic metal band saw with NC control, single mitre 90° – 45° – 30° Used machine – fully functional, refurbished Standard features: • NC control with digital display (99 programs with 99 sets each) • Torsion-free cast iron saw frame, hydraulically operated • Infinitely variable feed rate adjustment via control valve at the operator panel • Powerful band drive via industrial electric motor; 2 band speeds for optimal cutting results • Operating sequences (including fault messages) are digitally displayed • Hydraulic feed, single stroke feed length 600 mm; max. feed length 9999.9 mm • Hydraulic clamping of the workpiece via short-stroke cylinder (preset via handwheel) • Floating feed vice to compensate for material irregularities • Large-diameter band wheels and three-sided carbide band guides and band guide rollers ensure long service life of the saw bands • Electric band tension monitoring with saw blade breakage control • The machine operates with a 27 mm saw blade, available in various versions for processing a wide range of materials • Saw band is tensioned manually • Sturdy base frame with coolant tray and coolant pump • Coolant pump with dual supply to the band guides, individually adjustable • The machine is equipped with a high-performance hydraulic unit • All electrical/electronic controls operate at low voltage in accordance with EU directives! Scope of delivery includes: • Electronic height adjustment • Cutting pressure regulation • Bi-metal saw band M 42 • Rotating chip removal brush Technical data: • Cutting range: 90° round: 240 mm ; rectangular: 290 x 240 mm ; square: 240 mm Kfjdpfx Ajx I A Iyjffoa 45° right round: 200 mm ; rectangular: 200 x 240 mm ; square: 200 mm 30° right round: 110 mm ; rectangular: 140 x 110 mm ; square: 110 mm • Drive power 1.1/1.5 kW / 400 V / 50 Hz • Total connected load 4.9 kVA • Band speed 40 and 80 m/min • Saw band 2910 x 27 x 0.9 mm • Remnant piece length 80 mm • Smallest Ø 5 mm • Material support height 770 mm • Dimensions 1980 x 1750 x 1470 mm • Weight 651 kg

Condition: good (used), Year of construction: 1990, From liquidation: Mössner Rekord SSF 520 Year of construction 1990 NR.27968 Stepless speed from 15-2350m/min Kjdpsviym Djfx Affsfa 4 gears Band welder BSSO25 Air pump Work light Grinding stone Table swivels left15°-right45° Table size 790x740mm Clearance vertical 390mm--horizontal 500mm-- Height of the machine 2100mm Weight approx. 700kg

Condition: like new (used), Altendorf F45 EvoDrive CNC panel saw, 320 cm sliding table, motorized tilt and height adjustment of the saw blade, motorized right-side fence adjustable up to 1000 mm, motorized position indicators on the fence rail on the carriage, 3-axis scorer, electrically adjustable, 5.5 kW vario motor, speed adjustable via frequency inverter, max. blade diameter 550 mm, Ksdpsx I D D Nsfx Affjfa LED lighting for the scorer, machine from 2023, condition like new.

Condition: used, functionality: fully functional, Large wall saw Kfsdpfx Aox I A D Ijffoa

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Kodpfx Afexdciaofofa Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Horizontal panel saw HOMAG HPP300/43/43 Profi Kodpfx Asx I Aycjffofa Vacuum loading excluded Cutting width: 4300 mm Cutting length: 4300 mm Max. projection of main saw blade: 125 mm 8 clamping grippers

Condition: good (used), – 2 speeds – Double mitre – Hydraulically adjustable cutting pressure – Cooling system – Saw blade 2730 × 27 × 0.9 mm – Emergency stop – 400V Kfsdpfox Izkmox Affoa

Condition: good (used), Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... Kedpfx Asb D I Ateffsfa -carbide-tipped -Weight: 0.3 kg

Condition: excellent (used), Catalog number 7707 TECHNICAL DATA - Maximum saw blade diameter: 500 mm - Spindle diameter: 30 mm - Pneumatic material clamp - Pneumatic blade stroke - Maximum cutting width: 800 mm - Cutting height: 135 mm - Pneumatic control system - Main motor power: 11 kW - Extraction port diameter: 2 x 110 mm - Table dimensions: 520 x 1550 mm - Table height from base: 810 mm Infeed roller table: - Dimensions (L/W/H): 2700 x 720 x 900 mm - Equipped with 3 pneumatic stops - Table fitted with guide rail - Roller size: 530 mm - 6 driven rollers, 1.5 kW Outfeed roller table: - Dimensions (L/W/H): 2050 x 700 x 800 mm - Roller size: 590 mm - 11 idler rollers - Equipped with 3 pneumatic stops Machine dimensions (L/W/H): 1900 x 1450 x 1600 mm - Total weight: 1500 kg ADVANTAGES - Supplied with two roller tables - Italian manufacture - Pneumatic control system - Pneumatic blade stroke (feed speed adjustable by handwheel) - Used saw in very good condition Net price: 33,900 PLN Net price: 8,070 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may vary depending on exchange rate fluctuations) Kjdjw Edigopfx Affofa

Condition: new, Year of construction: 2025, Blade diameter ⌀250 - 350/30 mm Scoring blade diameter (work only with ⌀300, 350 mm blade) ⌀120/20 mm Main motor power 4 kW Scoring motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring blade 8800 rpm Blade tilt 0 - 45° Max. cutting length 3200 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Shaft flange diameter 87.5 mm Kedpfx Afov Dtuqsfefa Table stop ruler set to an angle of 90° - 45° accuracy ±1° Max. cutting height with ⌀300 mm blade 95 mm Max. cutting height with blade ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Weight 650 kg

Condition: excellent (used), functionality: fully functional, Catalogue number: 7670 TECHNICAL DATA - Track width: 340 mm - Roller width: 400 mm - Max saw blade diameter for multi-rip saw: 350 mm - Blade bore diameter: 80 mm - Max cutting height for edger: 100 mm - Max cutting height for multi-rip saw: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm Top section: - Kickback devices - Sliding pressure roller, metal - Kickback devices - Sliding pressure roller - Saw shaft - Sliding pressure roller - Sliding and pressure shaft, metal Bottom section: - Guide bar - Kickback devices - Track - Central lubrication Kfjdpfswrn Dnex Affsa - Infinitely variable feed speed adjustment - Electric saw shaft lifting 0.75 kW + body 1.1 kW - Feed motor 1.5 kW - Main motor 22 kW - Floating saw adjustment 0.55 kW - Lasers (not functioning, require inspection) - Extraction port diameter: 210 mm - Overall dimensions (L x W x H): 2200 x 1450 x 2000 mm - Weight: 1925 kg ADVANTAGES – German-made – Shaft with floating blade for edging – Includes additional sleeve for multi-rip saw – Used multi-rip saw, condition: very good Net price: 58,900 PLN Net price: 14,000 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Kodpfjxdbzbsx Affefa Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: excellent (used), Catalogue number 7756 TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 30 mm - Max. workpiece diameter with 400 mm blade: 130 mm - Motor approx. 5.5 kW - Feed motor: 1.1 kW - 3 feed speeds + forward/backward - Dimensions (L/W/H): 1500x1300x1300 mm - Weight: 530 kg ADVANTAGES – For palisades – With pointing device Kfodpfx Asxhcrpsffja – Easy to operate – Occupies little space – Used saw, very good condition Net price: 8,900 PLN Net price: 2,120 EUR depending on exchange rate of 4.2 EUR (Prices subject to change with stronger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm Kodpfx Aowtqbfjffefa - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg Kjdpoxvb Hzsfx Affofa FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition Kfodpexft Dwsfx Affsa – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made Kfsdpfxoxvb Sds Affsa – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)