Used Short Hobler for sale (4,467)

Condition: used, empty load weight: 3,280 kg, maximum load weight: 6,720 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, loading space volume: 44 m³, suspension: air, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, front access for through-loading with short transition flap, 2 rows of combination lashing rails, 7 pairs of lashing rings in the floor, 1 interior light, -- Typographical errors, mistakes, and modifications reserved, sample images --, More data at: !, More Details: ! Cedpfx Ajxz Rr Djb Tsaa

Condition: new, Cantilever shelf, double-sided, new goods Data: - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Casdox Dkr Aopfx Ab Tja Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23502035606, empty load weight: 5,325 kg, maximum load weight: 26,675 kg, overall weight: 3,200 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,490 mm, suspension: air, tire size: 385/65 R22.5", color: grey, trailer brake: trailer braked, Year of construction: 2024, The images shown are archive photos; the vehicle may still be in use! Chassis for Tipper Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Kingpin installed in the forward position Curved front panel (patented) 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight mounting plate, with drawbar equalizer Unhitching under load is not possible; when unhitched, the vehicle must stand with a rearward slope. Free rear swing clearance approx. 2100 mm in the rear position and approx. 2600 mm in the forward position! Wheel chocks with holder Aluminum side underrun protection Foldable rear underrun protection Rear underrun protection with spring assist for easier operation Half-shell fenders Splash guards behind the last axle in asphalt design, hinged on the fender, with hook-up option at the top of the fender, fender shortened Tarp bar with holder Tow hook at the rear (not for Revolution model) Axles & Suspension BPW or SAF drum brake axles, manufacturer’s option Axles in off-road version "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, operation via "3x braking" (starting aid functions up to a 30% axle overload and up to a max. speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year rust-through warranty Braking System 2-line compressed air braking system Color-coded lines for easier servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by traction vehicles capable of ensuring ABS function! With lift & lower valve Vehicle stability control system Paver brake, electrically controlled from the truck, without truck installation Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, manufacturer’s option Steel rims, factory silver Electrics 24 Volt, multi-chamber taillights, yellow LED side marker lights 2 white LED front position lights 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connecting cable Caodpfx Abjx Dkpno Tja 1 LED spotlight with integrated "Osprey" camera as trough camera (technical inspection required upon order) LED strobe light(s) at rear, controlled via switch in the truck, without truck installation, wired to pin 12 Upon order, specify pin allocation! Reversing camera system with color flat-screen monitor, wireless connection to monitor, monitor with suction mount and power supply via 24V vehicle socket Registration/Country & Plates Germany With Dekra approval and certificate (per §13 EC-FGV) 24/7 Service Hotline Body stability to EN 12642 Prepared for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white at the side and red at the rear Paintwork Frame: DB 7350 Novagrau "10-year rust-through warranty" Landing legs: Black coated Body/Side panel: Scania Urban Grey 2389173 Sliding tarp: RAL 7038 Agate Grey

Condition: new, Year of construction: 2025, Precision metal lathe TYTAN 750S 230V with spindle speed control on a DC voltage converter (inverter). Operating parameters: turning diameter 220 mm, turning length 750 mm, 1 kW motor at 230 V. The machine is designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking and reaming holes. Ideal for use in small production plants, workshops or garages. Machine description The TYTAN 750S 230V universal lathe, thanks to the smooth adjustment of the spindle speed, is an ergonomic machine that responds to the needs of the user. Reducing the time for setting the machine when machining parts with a wide range of dimensions translates into efficiency and ease of use. Version S - electronic and stepless spindle speed control, via a DC motor and voltage regulator. This ensures the best rotational accuracy of the lathe chuck, which gives better quality of machining of the manufactured elements. Main advantages: Modern DC motor with smooth spindle speed control ensures comfort of use and shortens calibration time. LCD screen – with spindle speed display allows you to control and quickly modify spindle speed when setting cutting and threading modes. Two ranges of spindle speeds: reduced (50-1125) for machining hard steels and increased (100-2500) for precision turning at high speeds. Cut threads – metric - 12 degrees (0.4-3.5), inch - 12 degrees (8-44), possibility of cutting left and right threads. Automatic feed – in compliance with EU directives (CE) and Polish regulations and DIN standards. The machine is fully compliant – easy and convenient machine operation. Machine base optionally available Technical parameters Turning diameter over bed 220mm Turning diameter over cross slide 110mm Spacing of fangs 750mm Bed width 100mm Hole through the spindle 38mm Cone at the end of the spindle MK5 Number of spindle speeds liquid Spindle speed range 50-2500 rpm Number of metric threads 12 Metric thread range 0.4~3.5mm Number of English (inch) threads 12 English (inch) thread range 8-44 threads per inch Longitudinal feed range 0.15 - 0.25 mm/rev (2) Maximum travel of the chuck slide 70mm Maximum travel of the cross slide 80mm Maximum longitudinal carriage travel 630mm Tailstock sleeve travel 60mm Taper in tailstock spindle MT2 Main engine 1000W Tailstock bearing liner travel distance 60mm Tailstock sleeve end MK2 Main engine 1000W Dimensions L/W/H (without base) 1250x380x1100mm ​ Weight (without stand) 95kg standard equipment 3-jaw chuck (125 mm) Fixed and movable rest Change wheels MK2 permanent fang MK4 permanent fang Lubricator Shavings tub Chuck and chuck key Complete set of service tools Safety guards compliant with CE standards User manual in Polish CE Declaration of Conformity optional equipment Machine base Cjdpfx Asv Uplajb Tjaa Set of lathe knives 12 x 12 (11 pcs. with soldered plate) MK2 live center MK2/B16 drill arbor HSS-CO5 Cobalt Drill Bit Set / 1-13 Universal cooling system Emulsifying oil, cutting fluid ES-12 1L

Condition: used, mileage: 509,333 km, first registration: 06/2018, emission class: euro6, IVECO 190S46, Year 2018, Euro 6, 509,333 km, wheelbase 3,800 mm, short cab, navigation system, rear camera, ZF automatic gearbox, intarder, retarder, differential lock, air conditioning, towing capacity 26,000 kg, vehicle as good as new. Codox Dkatepfx Ab Teaa

Condition: good (used), mileage: 534,925 km, power: 324 kW (440.52 HP), first registration: 10/2015, fuel type: diesel, color: green, axle configuration: 8x4, tire size: 385/65R22,5, fuel: diesel, wheelbase: 6,100 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, traction control, trailer coupling, - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control device) - Fixed - Hydraulic system - Short cab - Power take-off - Pump Csdpfexz N Ttox Ab Tjaa - Central lubrication - Central locking Number of axles: 4, Configuration: 8x4, Payload: 22,405 kg, Unladen weight: 13,595 kg, Gross weight: 36,000 kg, Total tank capacity: 350 liters, Trailer coupling, Unbraked towing capacity: 750 kg, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of differential locks: 2, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Green, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Air conditioning, Heated seats, Flashing lights, Engine power: 324 kW (434 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission make: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Power take-off, PTO type: 1, Starter battery, System length: 580 cm, Pump, Hook lift device height: 124, Central locking, Number of seats: 2, Seating: 1+1, Seat material: Fabric, Seat adjustment: Manual Transmission Transmission: ZF, 12 gears, automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 13 mm; Tire tread right: 14 mm; Suspension: leaf suspension Axle 2: Tire size: 315/80R22.5; Twin tyres; Tire tread left inner: 20 mm; Tire tread left outer: 20 mm; Tire tread right inner: 20 mm; Tire tread right outer: 20 mm; Suspension: air suspension Axle 3: Tire size: 315/80R22.5; Twin tyres; Tire tread left inner: 9 mm; Tire tread left outer: 9 mm; Tire tread right inner: 9 mm; Tire tread right outer: 8 mm; Suspension: air suspension Axle 4: Tire size: 385/65R22.5; Lift axle; Steered; Tire tread left: 8 mm; Tire tread right: 10 mm; Suspension: air suspension Dimensions Dimensions (L x W x H): 854 x 255 x 377 cm Weights Unladen weight: 13,595 kg Payload: 22,405 kg Gross vehicle weight: 36,000 kg Functional Loading platform height: 130 cm Pump: Yes Interior Number of seats: 2 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Identification Registration number: 65-BGK-6 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands from all years of manufacture and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • A good price • Proper business conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged quickly • Expert technical services • The safety of "recognizable quality" • And more.... Please visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in the...

Condition: used, Year of construction: 2007, operating hours: 21,500 h, Serial number: 212/K00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21918 Specifications: Model year: 2007 Hours: approx. 21,500 3 decks Radio control 3-axle Top section replaced Conveyor belts inspected/overhauled Ready for delivery Description:Jonsson & Sønner cone crusher from 2007.The owner purchased the unit in 2022 and has invested a fair amount in it. The top section has been replaced.He has not used it in production himself, but it has been started and tested. It is said to be in good condition.Can be delivered on short notice. Hours: 21500 Own weight: 21000 Codpfx Aoxz N Dxsb Tjaa Model: RC 3800 konknuser

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Csdox Dkrpopfx Ab Tjaa Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: used, mileage: 97,000 km, power: 78 kW (106.05 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 11/2012, loading space length: 3,500 mm, emission class: euro5, color: yellow, number of seats: 2, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, - Net sale price: €9,990 - First registration: 11/2012 - Emission standard: EURO 5 - Facelift model - TÜV / General Inspection new upon request - Automatic transmission Sample images – vehicle currently in transit SHORT VERSION – Short wheelbase !!! At least 20x Iveco Daily box vans in stock at all times !!! !!! No reservations possible !!! % VAT deductible Please, no emails / No emails We cannot process emails due to time constraints – thank you for your understanding! --- Opening hours and further information: Viewing and purchase without appointment: MON – THU: 9:00 to 16:00 FRI: 9:00 – 13:00 SAT: 9:00 – 12:00 Address: Tabakried 11 84076 Pfeffenhausen For inquiries: Christian Hirsch Please try calling multiple times as we are often in customer meetings. Further offers at --- Iveco Daily with box body – walk-through - VAT deductible - 1 previous owner - Original mileage with documentation Emission standard: EURO 5 Emissions badge: Green Number of owners: 1 Emission standard: Euro 5 = Green emissions sticker - Air suspension - Rear-view camera - LED interior lighting - Loading length: 3.50 m - Loading width: 2.05 m - Loading height: 2.07 m - Folding passenger seat - Sliding door between cab and cargo area - Sliding side door, right - Electrically adjustable (heated) side mirrors - Central locking with remote control - Electric windows – front Cajdpfx Abevh S D Ej Tea - External temperature display - On-board computer - Driver airbag - Immobilizer - ABS, ESP, traction control (ASR) For questions: Christian Hirsch or our friendly staff will be happy to assist you. % VAT deductible / Net price – export possible. More offers / Opening hours at / --- Specifications obtained via VIN check; technical errors may occur All information provided online serves as a non-binding description and does not represent guaranteed characteristics. The seller is not liable for typographical or transmission errors / modifications / input errors. Subject to errors and prior sale.

Condition: new, Year of construction: 2025, Characteristics of the RGE36PWx1700 threading machine The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is that it shortens the time required for the threading operation, which makes the entire process more efficient. The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device is driven by a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading machine arm has been equipped with a touch control panel with an intuitive menu in Polish . This panel allows easy programming of threading parameters, such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spray system, which effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower, which removes chips, providing good visibility of the drilled hole. The threading machine arm has a quick-clamping holder, allowing easy and quick clamping of taps in both through and blind holes. The threading head can be set both vertically and horizontally in the range of 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability, while maintaining a right angle (90°). The collets of the tap machine are equipped with adjustable overload clutches. The tap machine set includes DIN tap holders from M6 to M36, which provides a wide range of applications for different thread sizes. They are set to standard torque values ​​for different tap sizes, but it is possible to adjust these settings using a special key, which is part of the set. In addition, the machine is equipped with a manual mode that allows the user to control the threading process independently. It is also possible to program a cyclic change of the threading direction, which helps to break chips and maintain the efficiency of the process. Thanks to these functions, the threading machine provides even greater flexibility and precision in performing threading operations. Casdpfx Aevugrqeb Tsa The electric threading machine is designed to create threads in various materials, such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of the threads produced. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. Thanks to the use of modern technologies and a solid construction, the electric threading machine guarantees not only time savings, but also long-term efficiency and durability. It is an irreplaceable tool for professionals who require fast, precise and reliable threading in their daily work. The electric threading machine offers convenience, efficiency and excellent thread quality, significantly facilitating and streamlining the threading process. DIN tap holders included: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 The machine is sold without a work table, vice and taps Technical parameters Power 1.2kW Power supply 230V Libra 56kg Max arm reach 1700mm Max. rotation speed 125 rpm

Condition: new, mileage: 10 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, loading space length: 4,400 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, emission class: euro6, color: blue, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Vehicle with daily registration from 01/2023 heavily reduced! * Ford Transit 2.0 with 130 HP FWD drive * Audio system: FM / DAB radio MP3 USB * Bluetooth * Smartphone / tablet holder * Cup holder * Air conditioning * Central locking * Storage in the roof lining of the driver's cab * Driver's side airbag Cjdpsl Tgvcefx Ab Tsaa * Traction control (ASR) * Outside mirror with long support arm * Indicator light integrated in the outside mirror * On-board computer * Cruise control * Leather multifunction steering wheel * Roof lining in the passenger compartment * Tachometer * Start/stop system * Heated windshield * Driver assistance system: Hill start assist * Body/structure: Premium case without side door * Loading area lighting * Steering column (steering wheel) adjustable in height/length * Headlight range control * Fog lights * Daytime running lights * Engine 2.0 liter - 96 kW TDCi KAT * Low emissions according to Euro 6 emissions standard * Heat-insulating glazing Loading/passenger compartment * Center armrest * FWD drive * Pre-Collision Assist * Lane keeping assistant * Rear view camera (extra charge) * Structure: * Premium furniture case * 2 rows of rod strips (mounting height 800mm and 1600mm) * Portal doors 270° lockable * No side doors * 10x floor eyelets * Special floor, non-slip and waterproof * Transparent roof for daylight * Premium 3D roof spoiler and side wind deflector If the vehicle is not in stock - short-term delivery possible! Ask us for an individual leasing or financing offer * Net export possible * Delivery from 199¤ Didn't find the right vehicle? Configure your own vehicle! Whether equipment, structure or engine variant. Everything at a fair price! You can also buy just the structures for your existing vehicle from us! Do not hesitate to contact us! ----*The information provided on the Internet is non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors / subject to prior sale. This advertisement is to be understood as an invitation to submit an offer.

Condition: used, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 06/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available for immediate or short-term delivery, on our website. Extract from the list of features. Full specification available on request. Chassis * Standard ladder frame in lightweight steel construction with through cross members * Maximum distributed load of 30 t spread evenly over approx. 1.5 m at payload center of gravity * Coupling plate approx. 8 mm thick, with a 2" kingpin according to DIN 74080 / ISO 337 * Coil well approx. 9,000 mm internal length (in accordance with VDI Guideline 2700) suitable for coils with diameters from min. 900 mm to max. 2,100 mm Undercarriage * Axle lift mechanism on axle 1 * Automatic, load-dependent axle lift control Starting Aid * Activation by pressing the brake 3 times, 30% overload up to a speed of 25 km/h * Operation via switch on chassis * Additional operation possible from the cab (requires cab switch – PIN 12) SAF INTRADISC Three-Axle Unit * With disc brakes approx. Ø 430 mm, ET 120 * Air suspension with approx. 180 mm stroke Vehicle Tyres * 6 x 385/65 R 22.5, 160J * 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis Attachments * Mechanical landing gear with compensating foot, 24 t lift capacity, single-sided operation on the right in direction of travel * Spray suppression system according to Regulation (EU) No. 109/2011 for three-axle units with 385/65 R22.5 tyres, comprising 1 pair of quarter-circle mudguards in front of the axles, 1 pair of straight mudguards with mudflaps between axles 1 and 2, and 1 pair of quarter-circle mudguards with mudflaps behind the axles * Side underrun protection according to ECE-R73 * Storage for 8 square tube stanchions, internal dimensions approx. 340 x 220 x 2,150 mm, fitted behind axle unit * 2 waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm. Installed 1x left and 1x right at the rear Brake / Air Suspension System * EBS system 2S/2M with stability program (includes ABS/ALB function) * Air suspension system including 1 raise/lower valve, mounted to the left behind the axle unit in the direction of travel * Driving position adjusts automatically Cjdpovl N N Tsfx Ab Tjaa Floor * Mounted design on both sides * Steel pallet stops with VarioFix hole pattern (bolted), installed left and right in direction of travel, for an internal width of approx. 2,468 mm (internal loading height under outer rail reduced by approx. 20 mm) * Floor panels approx. 30 mm thick, multi-bonded plywood, recessed in the coil well area * Coil well side walls lined with approx. 18 mm thick plywood panels * Perimeter-sealed coil well cover completely made of wood, with floor panels approx. 27 mm thick * Pockets for square tube stanchions approx. 80 x 80 mm, positions as per drawing A2, 2 pairs on longitudinal member in 1st and 2nd positions, 8 pairs on the outer frame * 8 pairs of sockets in the coil well for accepting square tube stanchions approx. 80 x 80 mm, arrangement: 1st pair at the front of the well, 2nd–7th pairs as per standard drawing, 8th pair at the end of the well Body * Quick-release system at front for side curtain with tension tubes and deflection lever * Quick-release system at rear for side curtain with tension tubes and ratchet * Meets body strength requirements according to EN 12642 XL (VDI 2700), certified for a payload of approx. 27,000 kg Rear Wall * Double-wing rear portal doors made from aluminum, approx. 2,630 mm internal height * 4 integrated locking rods (2 left, 2 righ

Condition: used, machine/vehicle number: YV2AP90D4DA74xxxx, mileage: 520,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21915 Specifications: EU approved until 16.05.2026 Model year 2013 Mileage: approx. 520,000 km I-Shift Tires (see photos) Retarder Box included Fifth wheel Injectors replaced AdBlue removed Euro 5 Length: 754 cm Width: 255 cm Wheelbase: 340/137 cm Curb weight: 14,340 kg 700 hp Reverse camera Tow hitch Extra lights Light bar Bed Radio/CD Climate control / AC Description:Volvo FH16 700 combination truck from 2013.The truck is EU approved until 05/2026 and is ready for operation.Box included.Can be delivered on short notice. Km: 520000 HK: 700 Technical approved: Yes Caodpfx Abjxz N Drj Toa EU-approved until: 16.05.2026 Own weight: 14340 Total Weight: 30000 Payload: 15585 Width: 255 Length: 754 Euro: 5 Model: FH16 700 Kombibil Gearbox: Automatic

Condition: new, Cantilever racking to your desired dimensions! Ideal for storing your long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system that allows you to add elements as your requirements evolve. Perfect for offcuts or long goods in metal and wood businesses. Why BLT cantilever racking? - Certified German manufacturer DIN EN 1090 - Made in Germany- - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load! - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - We use the legally prescribed C4 load plates in accordance with DIN EN 15635 / BGR 234 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the upright profile. Cjdpjx Dkrcjfx Ab Teaa Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2025, Characteristics of the RGE36PWx1200 threading machine The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is that it shortens the time required for the threading operation, which makes the entire process more efficient. The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device is driven by a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading machine arm has been equipped with a touch control panel with an intuitive menu in Polish . This panel allows easy programming of threading parameters, such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spray system, which effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower, which removes chips, providing good visibility of the drilled hole. The threading machine arm has a quick-clamping holder, allowing easy and quick clamping of taps in both through and blind holes. The threading head can be set both vertically and horizontally in the range of 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability, while maintaining a right angle (90°). The collets of the tap machine are equipped with adjustable overload clutches. The tap machine set includes DIN tap holders from M6 to M36, which provides a wide range of applications for different thread sizes. They are set to standard torque values ​​for different tap sizes, but it is possible to adjust these settings using a special key, which is part of the set. In addition, the machine is equipped with a manual mode that allows the user to control the threading process independently. It is also possible to program a cyclic change of the threading direction, which helps to break chips and maintain the efficiency of the process. Thanks to these functions, the threading machine provides even greater flexibility and precision in performing threading operations. The electric threading machine is designed to create threads in various materials, such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of the threads produced. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. Csdjvugq Tspfx Ab Toaa Thanks to the use of modern technologies and a solid construction, the electric threading machine guarantees not only time savings, but also long-term efficiency and durability. It is an irreplaceable tool for professionals who require fast, precise and reliable threading in their daily work. The electric threading machine offers convenience, efficiency and excellent thread quality, significantly facilitating and streamlining the threading process. DIN tap holders included: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 The machine is sold without a work table, vice and taps Technical parameters Power 1.2kW Power supply 230V Libra 56kg Max arm reach 1200mm Max. rotation speed 125 rpm

Year of construction: 2015, operating hours: 3,500 h, condition: used, Serial number: 0xxxx Codpfx Abexz N A Ij Teaa Please contact ATS Norway for more information Please provide reference number upon request: 21919 Specifications: 2015 model Approx. 3,500 hours 119 kW Operating weight: 9,740 kg Undercarriage (see photos) Track width: approx. 50 cm Machine width: approx. 200 cm Prinoth M550 from 2019 Rear-view camera Good working lights Radio/CD Climate control/AC Description:Prime Tech self-propelled mulcher from 2015.The mulcher is in good working condition and has no known faults.It has approx. 3,500 operating hours.Can be delivered at short notice.See video! Hours: 3500 Own weight: 9740 Model: PT-175 dyrkningsfres SE VIDEO

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Cjdpfx Aex Dkq Sob Toaa Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, Year of construction: 2004, operating hours: 8,000 h, Serial number: L35BV189xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21914 Specifications: Model year: 2004 Hours: approx. 8000 55 kW Weight: approx. 6650 kg Cjdpsxz N Ausfx Ab Tsaa Tires (see pictures) Sold without extra equipment Additional lights Rotating beacon Small damage on the rear (visible in pictures) Radio/CD Climate control/AC Description:Volvo L35B wheel loader with approximately 8000 hours.All functions work, but it has an electrical fault.There is a small damage on the rear.Can be delivered at short notice. Hours: 8000 Own weight: 6650 Kw: 55 Model: L35B Hjullaster

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm Casdpfox Dkq Eex Ab Tsa - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, Year of construction: 1999, operating hours: 15,153 h, CE mark: yes Serial number: yh01-0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21909 Specifications: 1999 model 15153 Hours 62.5 kW 14600 kg Cut Additional hydraulics Chassis (see pictures) Sweating a little bit on the front cylinder Track steering Sanding bucket Excavator bucket Missing a cover (see pictures) Errors and shortcomings occur Small hydraulic leak that they can't figure out Climate Light Radio Ready for delivery Description: We have a 1999 Kobelco sk135SRLC w/ sanding bucket and digging bucket for sale. There is a small hydraulic leak that the owner cannot figure out. It is crawling faster on one track than the other. The owner does not know if this is related to the leak or if the belt motor needs to be replaced. It also sweats on one of the lift cylinders. Other than that, the machine works as it should, according to the owner. Csdpfx Absxz Nz Dj Toaa But errors and shortcomings exist. And some cost must be taken into account. Ready for delivery Hours: 15153 Own weight: 14600 Kw: 62.5 CE: Yes Model: sk135SRLC m/ pusseskuffe og graveskuffe

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Csdjx Dkqropfx Ab Tsaa Delivery is possible on request at a reasonable price.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Caodpjx Dkn Rsfx Ab Tja Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. Cjdpfx Asx Dknwsb Tjaa - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. Csdpfx Abox Dknks Teaa - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : Cajdpfx Ajx Dkndjb Tea - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.