Used Sheet Fed Offset Press for sale (18,527)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 163 h, functionality: fully functional, Roland R704 3B Attribute Specification Colors 4 Max. Paper Size 74 cm x 104 cm (approx. 29 x 40 inches) Max. Print Area 71.5 cm x 102 cm Max. Speed 15,000 sheets per hour (sph) Paper Thickness 0.04 mm - 1.00 mm Machine Length 9573 mm Year: 1999 Color 4 0 / 2 2 Cgsdoyfg N Uepfx Akcot Imp count: 163 mil Max speed: 15.000 sh/h APL Blanket Washing System - with Brush Ink Roller Washing Ink Temp control - Without Chiller Tehnotrans Steel plate in feeder and delivery Suction feed board powder sprayer Technotrans Beta refrigeration Axial circumferential diagonal register remote control Automatic format adjustment Color Pilot Control Sheet decurler Air Glide delivery Tape inserter at delivery In production Available immediately

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Cgsdowzvzmspfx Akcot

Condition: ready for operation (used), Year of construction: 2014, operating hours: 229 h, functionality: fully functional, machine/vehicle number: DS001155, Size 53 x 74 cm, Prinect Press Center, Axis Control, Autoplate XL, Alcolor dampening, cooling and recirculation unit, perfecting 4-4 or 8-0, excellent condition Cgedpfx Akswuth Rocot

Condition: like new (used), Year of construction: 2017, operating hours: 57 h, functionality: fully functional, machine/vehicle number: LS001402, FULL UV Size 53 x 75 cm, Anicolor, Wallscreen K Press Center XL 2, Alcolor VARIO dampening system, Combistar cooling and recirculation unit, Inking unit temperature control, Water-cooled machine, Autoplate PRO, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x UV interdeck dryer, 1 x UV end dryer, Powder spray, Extended delivery X2 module, Sheet brake, FOIL Print kit, Airstar Pro, Cleanstar Steel plate in feeder and delivery Cedpfxsx An Uro Akcsgt

Condition: good (used), Year of construction: 2011, operating hours: 160 h, functionality: fully functional, machine/vehicle number: GS000891, Size 36 x 52 cm, Alcolor Vario dampening system, Technotrans cooling and recirculation, inking unit temperature control, Anicolor inking units, double sheet control, sidelay control, blanket wash device, roller wash device, impression cylinder wash device, Autoplate, IR dryer, extended delivery. Csdpfox Apa Ajx Akcsgt

Condition: excellent (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: 1439, Size 36 x 52 cm, standard dampening, N+P unit Cgsdpjx I A Rujfx Akcjt

Condition: ready for operation (used), Year of construction: 2000, Man-Roland 504 F 130 MIOS Csdpfx Akjyc I Iyscogt Air center Densitometer Year: 2000 Colours: 4 Max thickness: 1 mm Autoplate Autowash Diagonal register Straight machine Rietschle Air Center Tachnotrans Alpha D Weko Powder AP 250 No damages on gears or cylinders In production

Condition: used, Year of construction: 1999, Roland R704 3B Year: 1999 Color 4 0 / 2 2 Imp count: 163 mil Max speed: 15.000 sh/h APL Blanket Washing System - with Brush Ink Roller Washing Codpfx Akoycv U Iscsgt Ink Temp control - Without Chiller Tehnotrans Steel plate in feeder and delivery Suction feed board powder sprayer Technotrans Beta refrigeration Axial circumferential diagonal register remote control Automatic format adjustment Color Pilot Control Sheet decurler Air Glide delivery Tape inserter at delivery In production Available immediately

Condition: used, Selling as a package Dominant 715, Dominant 547 & PlateRite CTP Cgsdpfxswxtrqj Akcot Please see out other adverts to see the other machines. One color offset. Format A2

Condition: excellent (used), Year of construction: 2004, Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Cgjdpfx Akottvc Recjt Colors: 4 Impress.Count: 68 mio Description: Man-Roland 304 Year: 2004 Imp count: 68 mil Colours: 4/0 or 2/2 Autosize Quick action plate clamp No diagonal register Technotrans aplha.d 40L Available immediately In production

Condition: good (used), Selling as a package Dominant 547, Dominant 715 & CTP machine. Cedeycc Hkopfx Akcegt Please see out other adverts to see the other machines.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 533469, Serial No. 533469 Year of manufacture: 1986 Total impressions: 185,469,793 BALDWIN 831-100-060 (1991) Cedpfx Aeyb Sxmokcegt CPC 1-0R; ZSP GRAFIX Exactomat 3A-X72 Inspection possible. Documentation available.

Condition: new, Year of construction: 2025, Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Folding bench ZGR-2140/0.8 Cgsdpfsci Hlfsx Akcst Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors plus 350 euros Manual folding machine plus 75 euros Delivery costs: PLEASE ASK Price: 1050 euros Delivery date: every week Cash on delivery and bank transfer in advance We are looking forward to your contact!

Condition: new, Year of construction: 2025, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping Codpfx Aechwa Djkcsgt We provide invoices with 0% of tax. Delivery every week :)

Condition: ready for operation (used), Year of construction: 1985, operating hours: 88 h, Heidelberg Speedmaster 102 FPP - 1985 year model - 88 millions impression Csdpfsyarblsx Akcogt Technical Specifications Color Capacity: 5 colors. Perfecting Configuration: The "PP" designation indicates a double-perfecting capability, typically allowing for 5/0, 1/4, or 2/3 printing configurations (printing on both sides of the sheet in a single pass). Maximum Sheet Size: 720 x 1,020 mm (approx. 28 x 40 inches). Minimum Sheet Size: 280 x 420 mm (straight printing) or 400 x 420 mm (perfecting). Production Speed: Up to 13,000 sheets per hour. Alcolor Dampening: A continuous film dampening system for consistent ink-water balance. CPC 1.02: The Control Press Center for remote ink and register control. High Pile Delivery: Standard for high-volume commercial production. Powder sprayer Weko

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, Great XL 75 machine in excellent condition and equipment Lacquer tower (chamber blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts, and circumferential, lateral, and diagonal register with Job Memory Card and touch screen Alcolor Vario film dampening units with recirculation and cooling CombiStar ink unit temperature control (water-cooled) Autoplate XL fully automatic simultaneous plate changing system (plate change in 1 minute for 5 plates!!) Preset automatic format adjustment automatic ink roller cleaning device automatic blanket and impression cylinder cleaning device Cgsdpfxex S Npfo Akcjt Grafix powder sprayer IR dryer DryStar 2000 Extended high pile delivery Standard accessories

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Cgjdpfedad Adjx Akcst Price excl. shipping We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, We provide our customers with a modern and comprehensive service in the field of building sheet metal working machines. Long-standing employees guarantee continuity and a high quality standard. Thanks to ongoing training, they meet the high requirements. Folding bench ZGR 2640/0.8 Guarantee 12 MONTHS. Certificate CE 2640mm working length STEEL SHEET 0.8 mm Bending angle 145 * shearing along the entire working length, raise the upper cheek in three layers, maximum clear width between the cheeks 80 mm rear rack for holding sheet metal, Servo motors for lifting the cheeks, cutting limiter at the front to ensure the specified cutting width, Roller scissors - with adjustment of the scissors guide and rollers made of high-alloy steel of very high resistance to wear. This allows sheet metal to be cut over a very long period of time without the need for grinding the roller shears. The performance of the roller shears is about 40 km of sheet metal with a thickness of 0.5 mm - up to the first grinding. The roller shears can be sharpened an average of 35 times. The roller cutter weighs approx. 6.5 kg. Roller scissors plus 350 euros Manual folding machine plus 75 euros the weight 290 kg Delivery: every week We are looking forward to your contact! Cgjdpfechuylox Akcet Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: excellent (used), Year of construction: 1992, Roland 202 TOB, built 1992 Series 257 Maximum size: 74 x 52 cm (29 x 20 inches) Csdpfx Akox Sqdqjcjgt Counter: 21 million

Condition: used, Year of construction: 2020, 5-color offset printing press + flexo + rotary die cutting Year 2020 Machine equipped with web guider and BST register camera Cgedpfxox Rc Tho Akcet

Condition: ready for operation (used), Year of construction: 2001, operating hours: 65 h, functionality: fully functional, Ryobi 525 HXX - Year 2001 Size 36 x 52 cm, PCS-H printing control Ryobimatic AAC dampening, Technotrans cooling and recirculation, Semi-automatic plate changers, Blanket wash, roller wash. Powder spray 65 million impressions Available immediately Codpfx Akex N Smzjcjgt

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: N.361427 / BM4934, BM4934 Heidelberg well established K-Offset series KORD64 1985 model - one of the very last KORD machines produced! grey model with long electrical box machine fully refurbished and test-printed ink unit completely dismantled and overhauled new ink and new dampening rollers Rilsan oscillator rollers replaced with NEW ones machine in excellent condition - cylinder & gears undamaged Csdscqxvlopfx Akcsgt Weight 2.650 kg - Dim L219 x W145 x H143cm 380/400V - 50Hz - 4.2kW machine fully refurbished and test-printed TOP condition!

Condition: good (used), Year of construction: 2004, Heidelberg SM 74-10-P-H Perefcting: 5/5-10/0 Max size: 53 x 74 cm Age: 2004 Location: Europe •⁠ ⁠CP 2000 •⁠ ⁠Autoplate •⁠ ⁠CP Tronic •⁠ ⁠Alcolor Vario •⁠ ⁠Color Asisstant •⁠ ⁠Ink Temperature Control •⁠ ⁠Blanket and Impression Cylinder Wash Up Device •⁠ ⁠Water cooled •⁠ ⁠In Production Cedpfxjvv Nrco Akcjgt

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, color channels: 4, paper width (max.): 74 mm, paper height (max.): 53 mm, Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Current State: In production Colors: 4 Impress.Count: 68 mio Extras: | Perfector | Touch-screen Control | Autosize Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Colors: 4 Impress.Count: 68 mio Extras: - Perfector - Digital Controls - Autosize Description: Cjdpfx Akjxnl E Socogt Man-Roland 304 Year: 2004 Imp count: 68 mil Colours: 4/0 or 2/2 Autosize Quick action plate clamp No diagonal register Technotrans aplha.d 40L Available immediately In production Located: Europe Eastern Available: Immediately Price: On Request Important: Very good condition Located: Europe Eastern Current State: In production Available: 10-2025 Price: On Request

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 65951607, color channels: 4, paper weight (min.): 60 g/m², paper weight (max.): 500 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 400 V, Koenig Bauer / KBA Rapida SRO 4 | 1988 | Offset printing machine Year: 1988 Format: 52x72 cm Colours - 4‑colour offset Speed -12,000 sheets/hour Paper Weight - 60–500 g/m² Feeder - Mabeg (± Technotrans) Inking Adjustment - Colortronic remote key Dampening - Technotrans / Varidamp (alcohol) Dryer - Infrared Powder Spray - Weko Cooling - Baldwin Cylinders Chromium-plated Codpswzt Ttsfx Akcegt