Used Screw Tap for sale (6,424)

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Pjdpsyc Sfpsfx Ahvegi Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: like new (used), Year of construction: 2018, operating hours: 145 h, machine/vehicle number: MA0003_SN807103, Demonstration Machine available immediately: RENNER RS-18,5 oil-injected screw compressor. Made in Germany Pgjdjdulwnjpfx Ahvei The compressor is in very good condition with 45 operating hour. Pressure: 10 bar Rated power: 18,5 kW Delivery quantity: 2620 liters / min Sound level: 71 dB (A) Compressed air output: 1 1/4 " Dimensions Length x Width x Height: 1287 x 799 x 1296 mm Weight: 532 kg Operating hour: 145 Bh

Condition: excellent (used), Year of construction: 2016, operating hours: 69,091 h, functionality: fully functional, Screw compressor CompAir L160RS Integrated frequency inverter and dryer Pgedpoyvhvrefx Ahvsi 160 kW 13 bar 32.33 m³/min

Condition: good (used), Year of construction: 2014, Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Manufacturer: ALMiG Model: VARIABLE 35 Year of manufacture: 2014 Free air delivery: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Motor speed: 1250–6500 rpm Serial number: F1410719 / S0030700 Quantity: 2 Pgedpfsyvgq Iox Ahvji Location: Pforzheim

Condition: ready for operation (used), Powder dispenser, screw conveyor, screw mixer, Z-arm mixer, used machine Pgodpfxoyvfr Ns Ahvji Overall dimensions : 1350 x 750 x 1190 mm Electrical data: 230/400 V ; 0.43 kW ; 50/60 Hz The screw conveyor has a double-bearing design and is equipped with a cover that opens under the effect of the material flow.

Condition: excellent (used), Year of construction: 2016, volume flow: 3.62 m³/h, operating pressure: 8 bar, Boge C 30 FD Screw Compressor Variable speed (inverter-controlled) With refrigerant dryer Motor: 22 kW Output: 3.62 m³/min Pressure: 8 bar Pjdpfx Aoywz Hmshvogi Year of manufacture: 2016 Operating hours: 11,260 h COMPRESSOR IN FULL WORKING ORDER.

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Model: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Center height: 185 mm Spindle bore: 40 mm Spindle flange: KK5 (DIN 55022) Spindle taper: MT5 Speed range: 20 – 1,600 rpm Digital readout: Heidenhain VRZ 773 B (2 axes) (Scales on compound and carriage) Dimensions: 1,900 x 900 x 1,700 mm Additional equipment: - Spindle brake with foot pedal - Adjustable stop on compound rest (feed disengagement) - Splash guard Accessories: - Operating manual - Multifix B quick-change tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Röhm 3-jaw chuck, 200 mm, with turning and boring jaws Weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power. All information is provided without guarantee; errors excepted. All dimensions are approximate. This offer is non-binding. The machine can be inspected upon appointment. Subject to prior sale and changes or errors in technical data, descriptions, and pricing! All prices are net plus VAT. Payment via advance bank transfer, including any freight costs, within 14 days after conclusion of contract. If payment is not received in full within this period, the seller reserves the right to cancel the purchase contract. Psdpfx Ahow Svtcevjgi Sale exclusively to businesses within the meaning of § 14 BGB. The machine is sold with exclusion of any liability for material defects. This exclusion does not apply to claims for damages arising from material defects, which are based on grossly negligent or intentional breach of duty by the seller or its agents, as well as in case of injury to life, body, or health. Any existing claims against third parties for material defect liability are assigned to the buyer. Please understand that I do not assume liability for compliance with any applicable or generally required safety regulations with regard to the sold machine or its components. Such compliance is the responsibility of the end operator. All contracts entered into with me are governed exclusively by the laws of the Federal Republic of Germany, to the exclusion of the UN Convention on Contracts for the International Sale of Goods (CISG). Place of jurisdiction is agreed to be Mannheim.

Condition: good (used), NARDINI MS 125 E / Lead and Feed Screw Lathe - Center height over bed: 150 mm - Swing over cross slide: 140 mm - Distance between centers: 500 mm - Bar capacity: 34 mm - Spindle speeds: 50 - 2500 rpm - Automatic longitudinal/cross feeds - Thread cutting / metric / imperial, etc. - Tailstock: MT 3 Pgjdpfx Ahoyam Slovoi - Quick-action collet chuck type 173E incl. 16 collets - Multifix toolpost with inserts - Change gears - Tool cabinet incl. various tools - Machine feet - Chip guard - Drill chuck & live center - Work lamp - Documentation Dimensions: LxWxH: 1.6 x 0.7 x 1.6 meters / Weight: 1250 kg Errors and omissions excepted.

Condition: used, Year of construction: 1990, operating hours: 50,000 h, functionality: unexamined, operating pressure: 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are offering this used Atlas Copco GA 75 screw compressor, year of manufacture 1990. Psdpjywyc Hjfx Ahvogi Manufacturer: Atlas Copco Model: GA 75 Year: 1990 Including dryer, oiler, and 2000L buffer tank. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2024, operating hours: 1,500 h, functionality: fully functional, Atlas Copco compressor model G 5 FF with integrated dryer and 500-litre tank. Main specifications: max pressure 10 bar, power 5 kW (7.5 HP), air delivery 888 litres/min. New list price: EUR 9,300. Pjdpfxsyu Rl Ej Ahvogi

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel Psdpsywr Tkjfx Ahvogi 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Application: PVC PIPES SCREW NUMBER: 014.185605 r.920 S Pgsdpfx Asywr Tdjhvei

Condition: excellent (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 2 m³/h, operating pressure: 13 bar, input voltage: 400 V, KTC KME 15 kW Screw Compressor Mounted on a 500 l pressure vessel With refrigeration dryer. 15 kW motor Capacity 2.00 m3/min Pressure 10 bar Pgedpfoyb Dbmjx Ahvsi Year of manufacture: 2017

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Progressive Header SACMA SP260 5 Dies - As new - Fully operational Available for any test at HBR srl premises. Completely overhauled Delivered fully painted and cleaned. Technical information: Number of dies: 5 Heading tonnage: 800 kN Maximum cutoff diameter (500N/mm²): 11.5 mm Pgodpfx Aewar Efehvsi Max. cutoff length: 85 mm Max. die kickout stroke: 65 mm Max. punch kickout stroke: 20 mm Speed (pcs. per minute): 275 Main motor power: 30 kW Die diameter: 54 mm Die length: 90 mm Punch diameter: 45 mm Net weight: 11,300 kg Gross weight: 13,000 kg We await your visit at HBR srl in Calolziocorte (LC)

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW Psdpfsyuvwasx Ahvsgi 8.75 bar 14.70 m³/min

Condition: new, Order picking trolley, shelf trolley, shelf trolley, trolley, transport trolley, shelf with wheels, shelf with boxes including 36 x visible storage boxes Data: H: approx. 216 cm D: approx. 68 cm L: approx. 1.95 linear meters Load: 150 kg per level Stand in blue Crossbeams in orange Storage boxes in blue Natural chipboard New goods BLT / WR 20/60 100% quality at the best price. Shelf consists of: 02 x stands approx. 200 cm x 60 cm, pre-assembled. 14 x crossbeams approx. 185 cm. 07 x support shelf approx. 184.5 x 59.5 cm. 28 x locking pins. 36 x visible storage boxes size. 5 (500x300x200mm) 02 x swivel castor with brake 02 x swivel castor without brake 04 x base plate for swivel castor Levels: 7 storage levels -- AVAILABLE IN MULTIPLE NUMBERS IMMEDIATELY-- Price: €822.00 net €978.18 gross You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Our recommendation: Let us know what you need... We are happy to help you realize your projects, from planning to ordering to assembly. Pgsdpfxsywikmo Ahvei Are you interested or have any questions? Just contact us by message or call. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 8:00 a.m. to 3:00 p.m. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), Offered is a Kaeser SK25 screw compressor with heat recovery. The compressor is in very good condition and ready for immediate use. Upon request, we are happy to send a video via WhatsApp. Manufacturer: Kaeser Model: SK 25 Year of manufacture: 2014 Power: 15 kW Operating hours: see photo. The price is gross, including 19% VAT, ex works, free loading. Condition: used. Pedpfx Aheywibfevjgi

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Podpfx Aog A Hcuehvegi

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Pjdpfog A Hcqsx Ahvjgi

Year of construction: 1997, condition: good (used), Build in 1997 Power 75 KW Pressure: 9 bar Pedpjg A Dypofx Ahvogi

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Podpfx Aeg A Hcmohvegi

Condition: used, Van Beek screw conveyor Pjdpfeywgm Eox Ahvsgi Entirely made of stainless steel Featuring cleaning hatches along the entire length Motor power: 2.2 kW Speed adjustable via built-in frequency inverter Screw diameter: 160 mm Length: 3400 mm Conveying height: 2140 mm Equipped with magnetic rod at the inlet

Condition: good (used), Year of construction: 1989, Offered from an insolvency is a ready to use tapping machine Manufacturer Fleet Model SB 15 GL year of manufacture 1989 Machine No. 34177063 Podpfx Asfm S Naohvogi Technical data: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Throat 200mm Chucks Bilz WFP 1 + inserts drill chuck Röhm 0-10mm Foot switch Digital display Pinol stroke Single continuous cycle Emergency stop Speeds from 80-3150 rpm 380 volts Engine power 0,75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs. Lead screw --pitches-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions weight approx. 200kg

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Pgodpfx Ahoyg H Tcsvji

Condition: good (used), overall weight: 1,200 kg, volume flow: 890 m³/h, Manufacturer: Worthington Model: RLR100V6 Max. working pressure: 9,5 Bar Power: 100Hp / 75KW Pgsdpouf Nibefx Ahvji 75 kW screw compressor with frequency inverter, with a flow rate of 880 m3/hour. Flow rate: 890 m3/hour. Three-phase 380V 3000 rpm Weight: 1200 kgs.