Used Screw Compensation Chuck for sale (9,648)

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm Kfsdpfx Afeb A R Hvsfsa -Weight: 19 kg

Condition: used, Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is equipped with 3 stainless steel lids, each with lenght 90 cm. Cover under the section where discharge is located is equipped with inspection manway with diameter 30 cm and stainless steel round lid. Inlet to conveyer has dimensions: 30 cm x 55 cm. Outlet has dimensions 28 cm x 30 cm. Machine has local control panel and is mounted on 4 wheels. Last time used in food industry. Kedpfsx Hwd Hjx Affjfa

Condition: good (used), Year of construction: 2012, operating hours: 13,327 h, functionality: fully functional, overall weight: 300 kg, power: 7.5 kW (10.20 HP), volume flow: 57 m³/h, pressure (max.): 10 bar, Renner compressed air compressor with refrigerant dryer and compressed air tank, year of manufacture 2022, with 250 l capacity (with inspection opening). Kodpfx Afjx Nautsfsfa

Condition: used, Year of construction: 2013, Lathe, used Manufacturer: WEILER Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over support: 245 mm Center distance: 1,500 mm Speed range: 20 - 2,000 rpm (2 ranges, infinitely variable) Spindle bore: 52 mm Equipment: - Infinitely variable speed control - HEIDENHAIN 3-axis digital readout - Multifix toolpost + 10 tool holders - 3-jaw chuck RÖHM DURO - 4-jaw chuck RÖHM - Collet chuck Fahrion + approx. 33 collets - Fixed and travelling steady rests - Various live/dead centers + drill chuck (see photos) - Coolant system - Documentation Kfjdpfjx I S I Njx Affja The machine was used in-house by a manufacturer of automation technology for their own products. The machine has been tested for basic functions; everything worked except for the spindle brake.

Condition: ready for operation (used), Two identical compressors with integrated refrigerated dryer are offered. Pressure dew point: +3°C, rated power: 30kW, delivery rate (FAD): 5.31m³/min at 8bar, 4.77m³/min at 10bar, 3.86m³/min at 13bar, control: Boge Autotronic, fully automatic operation. Inspection is possible by arrangement. Kfsdpfx Aex I Rqpjffja

Condition: excellent (used), functionality: fully functional, Palmia SKIT 400 screw conveyor Manufacturer: Palmia Type: SKIT 400 Machine number: 4930 Screw: stainless steel Screw diameter: 400 mm Kedpfx Aex I N Dbjffsfa Lifting height: 2600 mm Overall dimensions: 3900 × 1300 × 3400 mm The mobile Palmia SKIT 400 screw conveyor is a specialised device designed for vertical transport of bulk and semi-bulk materials, thanks to its 400 mm transport screw. The screw mechanism ensures a continuous and efficient material flow, allowing for effective movement of products up to a height of 2600 mm without the need for additional equipment.

Condition: good (used), Milling tool holder, attachment milling arbor Kodpfx Afsb A R Htefefa -Recording: PK50 -Cutter: Ø 32 mm -Weight: 7 kg

Condition: good (used), Year of construction: 2008, Lead and feed screw lathe OPTIMUM D560x1500 - CE certification - Year of manufacture: 2008 - 3-axis digital readout - Center height: 280 mm - Swing over bed: 560 mm - Swing over cross slide: 355 mm - Swing in the gap: 790 mm - Distance between centers: 1500 mm - Spindle bore: 55 mm - Speed range / gearbox: 25 - 1600 rpm - Feed rates / longitudinal: 0.059 - 1.646 mm/rev - Feed rates / cross: 0.02 - 0.537 mm/rev Kfsdpfx Aex I Ni Dsffea - Tailstock MT5 / quill travel: 180 mm - 3-jaw chuck: 300 mm + reversible jaws - Quick-change toolholder with inserts - Coolant system - Drive power: 7.5 kW - Documentation Dimensions (LxWxH): 3 x 1.4 x 1.7 meters / Weight: 2300 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: Kodpfxsx I Izrs Affsfa - Operating hours: 754 h - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW - Galvanised air receiver: 500 l - Integrated dryer RENNER Type RKT + 0065 - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm - Weight: approx. 350 kg

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Ksdpfxsxdbvrs Affefa Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Suction capacity: 950 l/min Discharge capacity: 800 l/min

Condition: used, amount of capping heads: 6 type of closures: 30 x 60 Kfsdox Iv Tcopfx Affea working direction: left-right

Condition: excellent (used), functionality: fully functional, Karl Schnell screw conveyor (screw elevator) Manufacturer: Karl Schnell Type: 642 Machine number: 1091 Kfsdpfx Afjx I Nrxofea Screw: stainless steel Screw diameter: 400 mm Lift height: 940 mm Overall dimensions: 2500 × 1000 × 2000 mm The Karl Schnell type 642 screw conveyor is an industrial conveying device designed for vertical or slightly inclined lifting and transport of bulk or granular materials. Its screw mechanism provides continuous and uniform material flow without clogging, making it ideal as a component in conveying installations and production lines. Equipped with a 400 mm diameter stainless steel screw and robust construction, the lift is characterized by its durability and high reliability. Its design allows for easy movement within the facility and adaptation to specific process requirements.

Condition: good (used), Screw clamps with shaft, pipe clamps, pipe fastening -DN: 10/12 Kjdpfxeb A Sl Se Affefa -DN: 20/22 -DN: 25/28 -DN: 50/55 -DN: 65/70 -DN: 80/85 -DN: 100/102 Price: complete Package weight: 11.5 kg

Condition: used, tool clamping area 200x55x195 mm weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. Kfodpfx Afegqg Rusfja --- price per piece ----

Condition: new, Year of construction: 2025, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Kedexdbubspfx Affefa Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: good (used), Screw clamps, pipe clamps, pipe fixings -DN: 20/22 -DN: 25/28 Kfedpfx Asb A Sl Rjffea -DN: 32/34 -DN: 40 -DN: 50/52 -DN: 65/70 Price: complete Package weight: 21.5 kg

Condition: used, tool clamping area 300x55x85 mm weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. Kfjdpfjgqlkgox Affja --- price per piece ----

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -without: interchangeable jaws Ksdpeb A Smwofx Affjfa -Mouth size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

Condition: used, diameter 315 mm Kfjdpfju Sbiisx Affsa 3-jaws chuck without jaws.

Condition: good (used), Tool holder, milling tool holder -Recording: SK40 -Inner diameter: 25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Weight: 3.5 kg Kfsdpfjb A Ifqex Affoa

Condition: used, diameter 250 mm Kfsdpoicbq Nofx Affoa

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool Ksdsb A Stfopfx Affjfa -Recording: SK40 -Clamping sleeves: 28 mm Price: complete Quantity: 10 available -Weight: 15 kg

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool Kfodpfxob A Stco Affja -Recording: SK40 -Clamping sleeves: 28/85 mm Price: per piece -Quantity: 16x Available -Weight: 1.2 kg/piece

Condition: good (used), Ball screw with nut, transfer roller screw, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod Manufacturer: Rexroth Type: R150257086 -Type: 69115 40H -Thread diameter: 48 mm -Thread pitch, two-stage: 20 mm -Total length: 1995 mm Kodscp Anpepfx Affefa -Weight: 26 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 160/70/H50 mm Kjdpsx Hfhyefx Affsfa -Total weight: 1.9 kg