Used Screw Clamp for sale (13,128)

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Dwsdpexgtd Hjfx Adujc Drive motor 55 kw

Year of construction: 1997, condition: used, feed pressure 10 bar liter capacity 1400 m³ / min Dwodpjqvcldsfx Aduec dimensions 700 x 550 x 1100 mm total power requirement 11 kW weight of the machine ca. 275 kg

Condition: used, Year of construction: 2010, operating hours: 76,256 h, functionality: fully functional, Equipment: type plate available, Frequency-controlled compressor New oil and filters Compair Type: L22SR-7,5A V2 Volume flow: 3.53 m³/min Dwjdpfswvac Rex Adujc Pressure: max. 10 bar Motor power: 22 kW Year: 12/2010 Operating hours: 76,256 Weight: 355 kg A suitable refrigeration dryer and 2000L compressed air tank can be purchased separately. The machine can be demonstrated under power on site. All information provided without guarantee. Errors and interim sale excepted.

Condition: used, Year of construction: 1968, Hilgeland ME2 VM trimming press for sale. Dwjdpfxsur N Ews Adujc

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg Djdpfopbwdlox Aduswc ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: used, Attachment suited for: Agricultural machines Dedpfjxlfd Asx Aduewc Working width: 270 cm

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Dwodoxlcfkepfx Adusc Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: excellent (used), functionality: fully functional, Hello, We offer used and new pallets for workpiece clamping from Erowa or compatible manufacturers. These are prepared to accommodate clamps with a 52mm pitch. We can also easily adapt clamps with a 96mm pitch. Clamping spigots included. Individual acceptance is possible. Spare parts are available. The clamps are not for sale. The used clamping devices have been cleaned and tested by us. A functional test was also performed. The clamping devices show slight signs of wear. Dwsdjwa Ihiepfx Aduec Do you have any questions? We would be happy to help.

Condition: ready for operation (used), K-tron T35 twin screw volumetric powder feeder with K-tron controller and one set of powder augers. Dsdjr Elk Ropfx Aduswc

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Dwedpfx Ajur N Daedusc Year of construction 1970 The machine is ready for immediate use!

Year of construction: 2015, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Dsdpfxji Hbgds Aduswc Used Hosokawa Micron B.V. Vrieco Nauta Minimix stand alone lab mixer machine. A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Nauta Minimix is a gentle conical screw mixer, specially developed for R&D work. It offers high quality powder mixtures without the risk of product distortion. Its mixing results offer reliable process information to scale up your process to a production level. The design of the Minimix is based on the Nauta conical screw mixer, the most common mixing technology for high accuracy and gentle mixing of free flowing powders and pastes. Execution: Stainless steel, non wear protected Non Pressure Shock Resistant (NPSR), non Atex Batch operation Scope of supply: Hosokawa Vrieco Nauta Minimix stand alone machine, with one cone with a maximum net capacity based on waterfill of 5 liter, including internal tools and controls

Condition: ready for operation (used), Year of construction: 2013, operating hours: 18,990 h, functionality: fully functional, power: 22 kW (29.91 HP), pressure (min.): 10 bar, Equipment: refrigerant dryer, Storage container with compressor, Renner type RKTBJ 2022 refrigerant dryer, 2 Drukosep water-oil separators, Mabe 2000 litre compressed air tank due to insolvency Dedpfx Aexlab Aeduowc

Condition: new, Year of construction: 2024, functionality: fully functional, power: 15 kW (20.39 HP), operating pressure: 10 bar, Equipment: documentation/manual, type plate available, New Boge C15-SF compressor Djdpfx Adoxk Uzhsuswc

Condition: ready for operation (used), Year of construction: 1962, functionality: fully functional, Used Weingarten P 100 screw press Pressing force: 80t Table: 350 x 400 mm Stroke: 80 - 250 mm Dwodsvuqlbopfx Adusc Stroke rate: 45 min-1 Installation space: 400 mm

Condition: ready for operation (used), Twin screw gravimetric powder feeder with K-tron controller. The listing is only for the gravimetric feeder. It comes with one set of augers. Dodpfx Ader Elkbjuewc

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 126-3 High-pressure clamp Jaw width: 125 mm Jaw height: 40 mm Opening width: 177 mm Clamping pressure: 2 / 3 / 4 tons Guide rail height: 62 mm - Clamping force adjustable in 3 stages - High-pressure clamp with mechanical power amplifier Dsdpfx Adoxf U Ahjuowc - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 103 mm Weight: 26 kg Good condition

Condition: excellent (used), TOS-TRENCIN SV 18 RA – Lead and Feed Screw Lathe For sale is a lead and feed screw lathe from the manufacturer TOS-TRENCIN, model SV 18 RA. The machine is in perfect condition and comes from the R&D department of a former VEB in Neubrandenburg (never used in production). ——— Technical Specifications • Swing over bed: 360 mm • Swing over cross slide: 215 mm • Turning length: 1,050 mm • Spindle bore: 40 mm • Distance between centers: 900 mm • Speed range: 14–2,800 rpm (21 steps) • Center height: 180 mm • Total connected load: 6.5 kW • Machine weight: approx. 1.9 t • Footprint (L×W×H): approx. 2.9 × 1.0 × 1.2 m ——— The machine is immediately ready for operation. • Inspection possible at any time • Loading and shipping can be arranged without issue ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net, plus VAT. Subject to modifications and errors. Djdexk Tyiepfx Adujwc

Condition: used, Year of construction: 2021, operating hours: 8,182 h, functionality: fully functional, machine/vehicle number: 1596-7980435, overall weight: 350 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,000 mm, power: 7.5 kW (10.20 HP), fuel type: electric, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Käser SM 13 T screw compressor including dryer Option K1_T2_C48 The machine runs perfectly; we had it serviced for sale. Dedpfx Adoxk Tx Eouswc

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: API791194, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 4.73 m³/h, pressure (max.): 7.5 bar, Oil-Free Compressor Atlas Copco ZT30 API791194, internally serviced and in perfect working condition. We have been Atlas dealers for 50 years. Large stock of used and new machines for sale. Djdpfx Aow Ecz Isdujwc

Condition: excellent (used), Year of construction: 2013, volume flow: 9.75 m³/h, operating pressure: 8 bar, BOGE SLF 75-3 Screw Compressor Variable speed (inverter) Motor 55 kW Capacity 9.75 m3/min Pressure 8 BAR Dwedoxk Auvopfx Adujc Year of manufacture 2013 COMPRESSOR IN FULL WORKING ORDER.

Condition: ready for operation (used), 75 HP, works fine, new oil and filter set. Dodpfx Aewdz Eceduswc

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Dwodow Rcgtepfx Aduec Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2009, volume flow: 7.7 m³/h, operating pressure: 8 bar, BOGE S 61 -2 Screw Compressor With heat exchanger Motor 45 kW Capacity 7.70 m3/min Pressure 8 BAR Year of manufacture 2009 Dsdpfx Aexkz Tqeduewc COMPRESSOR FULLY FUNCTIONAL.

Condition: ready for operation (used), 500l tank+ air dryer+ 7.5kw compressor from 2019. Dwedpfx Asw Rruyeduoc

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter Dwjdpfsw Nzrfsx Aduec COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.