Used Screw Cap for sale (6,541)

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, Compressor in excellent condition, rewound motor. The machine is operational and tested. Technical specifications: Max pressure: 10 bar Power: 90 kW - 110 HP Dedpfx Aoxn Sw Ioc Nscc Capacity: 16,200 liters/min

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with 26 mm screw diameter This machine incorporates all the features of the ZSK Mc 18 series and is suitable for formulation development, compound sampling, as well as production of smaller compound batches up to approximately 180 kg/h. Compared to the previous ZSK 26 Mc model, the enhanced laboratory extruder enables throughput increases of up to 100%, as the torque has been raised to 15 Nm/cm³. The extruder is mobile and requires only minimal space, as the control cabinet is integrated into the machine base. Both heating and cooling systems are pre-installed and ready for operation (plug & play). Machine No.: 20526471 Year of construction: 2012 Operating hours: approx. 30,000 h Condition: Used, operational Technical specifications: Type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10% / +6%), 50 Hz ±2% Barrel configuration: E-0-0-S-0-0-1-0-V-0 Throughput: approx. 150–200 kg/h, depending on formulation, raw materials, and desired product quality Applications: Highly filled compounds, masterbatch production Capable of processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of supply Gravimetric feeding system: Dsdpjyhd Dbjfx Ac Necc - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × twin screw powder feeder Side feeding / degassing: - 1 × ZS-B25 side feeder - 1 × ZS-EG25 vacuum side degassing unit Vacuum system: Busch Plastex MI 0120 B 222 CNX6 vacuum pump, specifically designed for PET applications Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit - Strand pelletizer SP50 - Water bath not included Peripheral equipment: - Bag emptying station for pellets - Conveying system up to feeders Spare parts: - Spare parts included, 2nd screw set.

Condition: new, overall weight: 340 kg, volume flow: 1.44 m³/h, Atlas Copco G11FF screw compressor Specifications: - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW - tank - 500 l - maximum operating pressure - 10.00 atm - built-in refrigeration dryer - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) Dedpfeh Unupsx Ac Nocc - meets CE standards - weight - 340 kg Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Dedpfx Aeyfw H Rsc Nscc Filling point: 6 heads Plunger filling head: yes Volume: from 15 to 500 ml Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length: 16 to 60 mm pressure cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Dcsdpfx Acoyhcghs Noc Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Dcjdpfoyhcc Ajx Ac Njc Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, Conveyor screws, screw conveyors Heavy-duty design, suitable for high capacity Specifications: 1x conveyor screw, diameter 470mm, length: 4000mm 1x conveyor screw, diameter 420mm, length: 6450mm 1x conveyor screw, diameter 320mm, length: 3800mm (without electric motor) 1x conveyor screw, diameter 420mm, length: 8500mm 1x conveyor screw, diameter 420mm, length: 3550mm 1x conveyor screw, diameter 420mm, length: 4050mm 1x conveyor screw, diameter 420mm, length: 5000mm Equipped with heavy-duty external bearings with shaft seals. Available individually or as a batch. For more information, please contact us. Dcodpsyhblpsfx Ac Noc See our other listings as well VMA Wekerom

Condition: new, Year of construction: 2026, Tüm ürünlerimiz özenle üretilmiştir ve 1 yıl garanti kapsamındadır! Kurulum ve Operatör Eğitimi ÜCRETSİZ • Model: FABO HY-600 • Tip: Çift Helisli Burgu Yıkayıcı • Kapasite: Saatte 60 ton • Ölçüler: 1400 x 6650 x 1800 mm • Boru Çapı: Ø 600 x 6000 mm • Hız: Dakikada 22 devir • Motor: 2 x 5.5 kW Ağır Hizmet Gamak Motor Dedpoyg U I Ijfx Ac Necc • Su Tüketimi: 55–205 m³ • Şasi, motor ve güvenlik muhafazaları dahildir. DAHA FAZLA BİLGİ İÇİN LÜTFEN BİZİ ARAMAKTAN ÇEKİNMEYİN!!!

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 Djdpjyfm Spsfx Ac Njcc • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder Dcsdjyfm Epepfx Ac Nec As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: like new (used), Year of construction: 2021, operating hours: 23,369 h, functionality: fully functional, Atlas Copco GA160VSD+FF screw compressor. Integrated dryer and frequency converter. 160 kW with 8.3 bar and 35.6 m3/min. Heat recovery system installed. Dsdpfx Aceyfl Ivo Nscc

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AII 471146, GA 75 screw compressor Maximum operating pressure: 10 bar Dodet Du Syspfx Ac Nscc Compressed air production: 192 l/s Power: 75kW Speed: 3000 r/min Weight: 1550kg

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 1003046, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 4 m³/h, operating pressure: 10 bar, pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Fixed speed screw air compressor, 30kW, 40hp. 4000 operating hours, condition like new. Djdpjyg Iawjfx Ac Njcc

Condition: good (used), Year of construction: 1996, operating hours: 8,400 h, functionality: fully functional, power: 18.5 kW (25.15 HP), operating pressure: 8 bar, Max working pressure 7,5 bar power 18,5 kW approx. 8400 working h GA18 age 1996 air dryer FX15 age 2016 Dedpfxjyg H Tis Ac Necc

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Dedpfxjyg H Tce Ac Njcc

Condition: used, functionality: fully functional, The screw separator is available for sale Length: 900 mm Profile: 6 mm high Roller diameter: 100 mm Speed: adjustable Mobile design Dodpfeyg Hp Rex Ac Nscc

Condition: good (used), Year of construction: 2014, Screw Compressor ALMiG COMBI 8-10 – Year of Manufacture 2014 – Excellent Condition For sale is a used screw compressor from ALMiG, in very good, well-maintained condition. Manufacturer: ALMiG Model: COMBI 8-10 Year of Manufacture: 2014 Compressor Type: Screw compressor (COMBI version) Technical Specifications: Free air delivery according to ISO 1217 at 10 bar (g): 1.02 m³/min Installed motor power: 7.5 kW Drive motor speed: 3,000 rpm Protection rating / insulation class (drive motor): IP55 / F Efficiency class: IE3 Operating voltage: 400 V Dcodeyg Hdnepfx Ac Nsc Frequency: 50 Hz Dimensions & Weight: Dimensions (L × W × H): 1,180 × 770 × 1,128 mm Weight: 345 kg Other Information: Sound pressure level (DIN 45635 T.13): 64 dB(A) Compressed air connection: G 3/4″ The compressor is ideally suited for workshops, trades, and industrial operations. Very compact design, quiet operation, and reliable technology. Location: Burbach Inspection: By appointment We load on site Transport: Can be organized Sale as inspected. Subject to prior sale and errors.

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Dcedpfx Asyg Eghoc Noc Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Dcedpfx Astx Aknoc Njc Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.

Condition: good (used), Year of construction: 2002, Screw Compressor Water Cooled Fabr.BOGE Type:SO150 Bj.2002 Compression final pressure 10 bar Motorl.110KW with refrigerant dryer . Mass: L3,5m B1,5m H1,7m Weight each approx. 3200 Kg. Documentation available. Dsdpsh Hi Insfx Ac Nocc 4. piece Available . Price for 1.piece .

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Dcjdpfeh I T Nrjx Ac Nsc Diameter 63 mm Diameter 50 mm Diameter 40 mm In good condition.

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016 Dedsvfxqyjpfx Ac Nscc

Condition: good (used), Year of construction: 2011, MANUFACTURER: ATLASCOPCO MODEL: GA160VSD S/N: APF163595 YEAR: 2011 POWER (kW): 186 CAPACITY (m3/min): 4.82–18.36 PRESSURE (bar): 10 HOURS (DOC/TOTAL): Djdpfx Ajygx U Ssc Njcc FREQUENCY INVERTER: yes

Condition: used, Technical specifications: Operating hours: 2443 h Tank capacity: 500 l Performance: 950 L/min Pressure: 10 bar Electric temperature display Dedpfjx Hghbex Ac Njcc Safety switch Power supply: 400 V Motor power: 9 kW Dryer: Max pressure: 15 bar Max ambient temperature: +45°C Overall dimensions: Length: 1950 mm Width: 750 mm Height: 1400 mm

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm Dcodoydk Ifspfx Ac Njc 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm