Used Scoring for sale (641)

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and technical data: - Condition: well-maintained - Raise/lower and tilt 0-45° with hydraulic foot pedal - With fine and quick stroke function, fully maintenance-free - With digital display on the circular saw fence for cutting width - With fixed angle adjustment on the length stop for 75/67.5/60/45 degrees - Cutting height: 145 mm - Cutting width: 1050 mm - Cutting length: 3300 mm Lodpfox Enq Iex Affoak - Speeds: 2800-4000-5500 rpm - Motor: 5.5 kW - With scoring unit Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1994, Saw unit: tiltable 45° Carriage length: 3200 mm Max. saw blade diameter: 400 mm Max. saw blade projection at 90°: 125 mm Max. saw blade projection at 45°: 88 mm Saw blade bore: 30 mm Motor power: 5.5 kW Max. cutting width: 1300 mm Control panel: at eye level Control panel design: with buttons and LCD screen Height adjustment: electric motor Tilt adjustment: electric motor Lajdpfxjx H Tmde Affek Tilt angle display: on screen Cutting width adjustment: motorized Cutting width display: on screen Sliding table guide: Pertinax Table extension length: 840 mm Crosscut at cross fence: 3800 mm Cross fence display: scale Cross fence design: fixed 90° Speeds: 3/4/5/6000 rpm Scoring unit: yes Scoring unit adjustment: motorized and manual Scoring blade: two-piece saw blade PSV safety guard: yes End position lock: yes Automatic motor brake: yes Weight approx.: 1150 kg Extraction diameter: 120/80 mm Storage location:

Condition: used, Year of construction: 2004, Carriage length: 3000 mm Laedpfxex Edlre Affok Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut scale display: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Year of construction: 2006, operating hours: 27,750 h, condition: ready for operation (used), General Data Machine weight 8100 kg Main Drive Spindle speed range 6840 Number of axis 3 Movement X-Axis Movement 300 mm X-Axis Rapid Traverse 80 m/min Y-Axis Movement 100 mm Y-Axis Rapid Traverse 80 m/min Z-Axis Rapid Traverse 20 m/min Lasdpfxjx D Rtyj Affok This 3-axis PANHANS POLYPAN 47 was manufactured in 2006. It features 4200 mm cutting length and width, maximum cutting heights of 72 mm at 0° and 40 mm at 47°, and a saw carriage speed up to 100 m/min. Main motor power is 13.5 kW, with a scoring unit. Weighs 8100 kg. If you are looking to get high quality sawing capabilities consider the PANHANS POLYPAN 47 machine we have for sale. Contact us for further details. Application Types Sawing (Wood)

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, saw blade diameter: 460 mm, sheet thickness aluminum (max.): 100 mm, total length: 6,515 mm, total width: 7,114 mm, total height: 2,269 mm, type of input current: AC, overall weight: 7,000 kg, section length (min.): 45 mm, section length (max.): 3,100 mm, working height: 970 mm, input voltage: 400 V, year of last overhaul: 2025, saw drive: 27,000 W, operating pressure: 6 bar, input current: 66 A, sheet thickness brass (max.): 100 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Schelling fm6 330 Precision cut-to-size saw for aluminum, non-ferrous metals, plastics and composites Year of construction: 2011 Operator software: Schelling MCS Evolution Operating system: Windows Control system: Siemens Cutting length max.: 3.333 mm Cutting width max.: 3.300 mm Cutting height max.: 100 mm Saw blade projection max.: 135 mm Saw blade diameter max .: 460 mm Saw blade rotation speed: 3.500 rpm Main saw motor: 27 kW Saw aggregate forward: 0,1 up to 80 m/min Saw aggregate backward: up to 80 m/min Feeder reverse: up to 30 m/min Feeder forward: up to 25 m/min (Europe: acc. EN 1870-13) Number of material clamps: 8 pcs. Clamp opening max.: 133 mm Strip aligner before and behind the pressure beam Automatic cutting length adjustment Grooving device Synchronized sawing and –scoring Central cleaning system – saw machine Minimum lubrication system for saw blade with 2 nozzles Air cushion tables: 2 piece 2.100 x 700 mm Air cushion table no. 3 is available optionally This machine is in very good condition and in perfect working order. The machine has been refurbished, inspected and tested in our company. Lsdpfx Afox Hynbofeak Errors and alterations in the technical datas and informations excepted!

Condition: good (used), Horizon BQ-270C Perfect Binder Machine in very good condition. Ready to use. Very low mileage. Manufacturer’s description: Laodpex A Scaofx Affok Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Horizon BQ-270C is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. Equipped with a core thickness scanner, it allows for on-demand binding. Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives. Maximum milling depth up to 3 mm. Automatic cover feeding via a suction drum with a secure, consistent alignment with the bound sheets. A factory-installed system creates 4-fold creases on the cover, which automatically adjusts for precise alignment.

Year of construction: 2025, condition: new, New machine Laedpfx Aex Enrxeffjk Year of manufacture: 2025 Features and technical data: L'invincibile SI X - PANEL SAW WITH DOUBLE BLADE TILTING 931201 Frequency: 50 Hz 570348 Scoring unit with independent motorization 570351 LED lighting in the scorer area 530130 "Full Support & Wireless" 570353 Extension with roller track on the rip fence side 080999 Ex works R01264 L'invincibile SI X CE version 083202 Base 109993 MACHINE LANGUAGE: German 930731 Voltage: 400V EU 080685 Additional packaging 109999 Standard safety regulations Article number: SI X Variant: R021401 Availability: upon request Location: Flörsheim

Condition: used, Year of construction: 2025, New display machine! Including 3-axis control Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment General features of the P 450: Sliding table made of anodized aluminum, including high-precision guide rail made from hardened and ground steel Sliding table can be locked in any position Saw blade guard with swivel-away function Extension arm with adjustable mitre stop and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Display for set saw blade speed Electrics and safety devices according to CE standards Ledpfx Aewvcf Ueffeak Technical data: Saw blade tilting: 0° to 45° Table dimensions: 1,030 x 680 mm Sliding table dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm / 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP 2 extraction ports Mitre stop extendable to 3,600 mm Location:

Condition: used, Year of construction: 2001, sliding table length: 3000 mm cutting width at the fence: 1300 mm Lsdjx Edlxepfx Affjak cutting width at the cross cut: 3200 mm cutting depth: 145 mm scoring unit: Ja height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch adjustment fence: elektrisch adjustment crosscut fence: manuell read out tilting: Digitalanzeige read out sawblade height: Digitalanzeige read out crosscut: digital Anzeige Ablänglineal: Scala sawblade diameter: 450mm speeds: 4 motorpower: 5,5kW suction connection: 80 und 120mm machine length: 3600mm machine width: 2200mm weight: 1200 kg

Year of construction: 1999, condition: ready for operation (used), This MAYER PS9Z was manufactured in 1999. A robust horizontal panel saw, it features a powerful 12 kW motor and a cutting length of 4200 mm. Equipped with a scoring unit and pneumatic lowering, it ensures precise cuts. The saw includes air cushion tables and a material pusher with a 4200 mm travel distance. Consider the opportunity to buy this MAYER PS9Z panel saw. Contact us for more information about this machine. Application Types Sawing (Wood) Ledpsx D Nyfofx Affeak

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. Lasdedy Dw Aspfx Affek In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Condition: new, CATALOGUE NUMBER RE022 – new machine, in stock – DTR + CE documentation – cutting width at the guide 1300mm – main engine 6kW TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - cutting length on the carriage 3000mm - main spindle speed 3500/4500rpm - spindle diameter 30mm - main blade diameter 300-400mm - max. scoring diameter 125mm - scoring engine power 0.75kW - scoring speed 8500rpm - spindle diameter 20mm - cutting width at the guide (standard 1050mm, option 1300mm) 1300mm - sawing width using bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90°/45° 90/60mm - cutting height for 350mm 90°/45° 5-115 / 3.5-80mm - cutting height for 400mm 90°/45° 25-140 / 15.5-95mm - diameter of the exhaust port 80mm, 125mm - dimensions length/width/height 3300/3460/1500mm - weight 750kg Optional equipment: - angle ruler - with aluminum strip - additional support table - additional start/stop in the formatting table - electronic cutting width reader on the longitudinal ruler - electronic cutting width reader on the auxiliary table - formatting table 3200mm, 3900mm, 2500mm Net price: PLN 41,550 Lodpod Sg Hxsfx Affoak Net price: EUR 9,890 Net price calculated according to the exchange rate of PLN 4.20/EUR (with larger exchange rate fluctuations, the price may change) The prices given are net prices. Net price given for international transactions, customers from the EU with an EU tax identification number.

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station - Number of gathering stations: 18 Lasdpfx Afex Dkklofok - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Müller Martini 3006 /30 Z Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Condition: used, Year of construction: 2012, Saw unit: tiltable 45° Carriage length: 2000 mm Max. saw blade diameter: 400 mm Max. saw blade projection at 90°: 125 mm Max. saw blade projection at 45°: 87 mm Saw blade bore: 30 mm Motor power: 5.5 kW Max. cutting width: 1000 mm Control panel: located on the lower machine housing Control panel version: with buttons and digital display Height adjustment: electric motor Tilting adjustment: electric motor Tilting angle display: digital Cutting width adjustment: manual with fine adjustment Cutting width display: digital Sliding table guide: steel Table extension length: 840 mm Cross-cutting at cross fence: 3200 mm Cross fence display: scale Cross fence version: fixed at 90° Speeds: 3/4/5000 rpm Lasdpfx Aex Hwqyjffek Scoring unit: yes Scoring unit adjustment: motorized and manual Scoring blade: Rapido system PSV guard: yes End position interlock: yes Automatic motor brake: yes Working height or feed table height: 910 mm Weight approx.: 1100 kg Extraction diameter: 120/80 mm Description: 120/80 Storage location:

Condition: new, Year of construction: 2025, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, main saw diameter: 400 mm, type of input current: three-phase, CIRCULAR SAW model SCM SI 4 . CN NEW machine in prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - electric and automatic NC mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide Ljdpfxsglp I Ns Affsak extension floor out with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50

Year of construction: 1998, condition: ready for operation (used), Technical Specification Max. Cutting Length 3100 mm This SCHEER PA 4136 panel saw was manufactured in 1998. It features a cutting length of 3100 mm, cutting height of 70 mm, and a saw blade projection of 77 mm. Equipped with a 7 kW main saw unit and a 1.1 kW scoring motor, it offers a saw feed speed of up to 40 m/min. Consider the opportunity to buy this SCHEER PA 4136 panel saw. Contact us for more information. Application Types Laodpfxjx D E Dmo Affok Sawing (Wood)

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Ledsb A Nmispfx Affsak -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 18 kg

Condition: excellent (used), CATALOG NUMBER 7644 Technical Data: - Max main blade diameter with scoring unit: 350 mm - Max main blade diameter without scoring unit: 450 mm - Cutting height with mounted blade: 100 mm - Main blade adjustable hydraulically: up/down + angle - Electric angle display - Electric height and lateral adjustment of scoring unit - Spindle diameter: 30 mm - Spindle locking - With sliding table - Cutting length on sliding table: 2800 mm - Cutting width at fence: 1440 mm - With side carriage - With scoring unit - Max diameter of scoring blade: 120 mm - Scoring unit spindle diameter: 22 mm - Scoring unit motor: 0.75 kW - Main motor: 5.5 kW - 4 spindle rotation speeds - Electronic speed display - Extraction port diameters: 120 mm, 80 mm - Table dimensions: 1220 x 730 mm - Table dimensions with extension: 1230 mm - Table dimensions with extension: 2070 mm - Saw blade guard Lasdpfx Ajwgdh Seffek - Dimensions (L/W/H): 2940 x 3400 x 1420 mm - Weight: 1100 kg ADVANTAGES – German-made – With scoring unit – Not repainted – Used saw, in very good condition Net price: 29,900 PLN Net price: 7,120 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate changes, the price may change)

Condition: used, Year of construction: 2007, Perfect binding line Wohlenberg City E-6000 (edition 6000) Year: 2007 Consisting of Book block feeder Solema 6353 Gathering machine Wohlenberg Sprinter E Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST - Opticontrol OSC 1-1 - Excluding pump(s) - Set up element - Criss cross delivery - Transfer into the binder Perfect binder Wohlenberg City E-6000 (edition 6000) Description: - TFT touch screen - Number of clamps: 15 - Milling and roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Front cutter: VSS - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - PUR spine gluing unit - Rotary cover feeder - Scoring station - First nipping and pressing station - Second nipping and pressing station - Lay down device (to the left) Transport system Description: - Transport system, length (approx): 50 mtr - Escape delivery Three knife trimmer Müller Martini Merit S Lsdpjx Dki Uefx Affsak Year: 1997 Description: - Right hand infeed - Automatic hopper feeder for inline production - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Rima RS-3310S Year: 2007 - Delivery to the right Shrink wrapping machine BVM BMS 6030 W Year: 2007 With shrink tunnel

Condition: used, Year of construction: 2001, Max. cutting width: 4600 mm Max. horizontal cutting height: 1958 mm Max. vertical cutting height: 2070 mm Max. machining thickness: 60 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Bottom support: fixed rollers Material support: aluminum slat frame with plastic coverings Small parts support: Yes Measuring system: scale Saw head tilting: manual Mounting: free-standing Scoring unit: with saw blade Weight approx.: 700 kg Motor power: 3 kW Extraction diameter: 2x100 mm Storage location: Ljdpfxox Hwqaj Affeak

Year of construction: 2000, condition: ready for operation (used), Technical Specification Max. Cutting Length 3300 mm This HOLZMA HPL 23/X/33/22/30/L was manufactured in 2000. A robust used panel saw featuring a cutting length of 3300 mm, 3 air cushion tables, and a lifting table measuring 3300 x 2200 mm. It includes a main saw with 18 kW power and a scoring saw of 2.2 kW, controlled by a CADMATIC system. Contact us for more information about this machine. Laedjx D Hlfopfx Affok Application Types Sawing (Wood)

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm Lajdpovwlfbefx Affsk max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Year of construction: 1994, condition: ready for operation (used), Control Unit Brand SIEMENS Model S5 This ANTHON CUTTING SYSTEM was manufactured in 1994. It features a Siemens S5 control system, a portal feeding system with suction crossbeam, and a saw carriage with scoring and main saws. Ideal for handling package heights up to 150 mm. If you are looking to get high quality cutting capabilities consider the ANTHON CUTTING SYSTEM machine we have for sale. Contact us for more information about this machine. Application Types Sawing (Wood) Ledpfxjx D Huyo Affjak

Condition: new, CATALOG NUMBER RE036 2 axes – electrically controlled lifting and tilting of the main saw blade with electronic height and angle readout, control panel integrated into the machine body – Brand new machine, in stock – Documentation: DTR + CE – Cutting width at the rip fence: 1300 mm – Main motor power: 6 kW TECHNICAL SPECIFICATIONS - Saw blade tilting range: 0–46˚ - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Main spindle diameter: 30 mm - Main blade diameter: 300–400 mm - Max scoring blade diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring unit speed: 8500 rpm - Scoring spindle diameter: 20 mm - Cutting width at rip fence (standard 1050 mm): 1300 mm Laedpfxovvif Nj Affok - Cutting width using stops on auxiliary table: 215–3200 mm - Cutting height for 300 mm blade at 90°/45°: 90/60 mm - Cutting height for 350 mm blade at 90°/45°: 5–115 / 3.5–80 mm - Cutting height for 400 mm blade at 90°/45°: 25–140 / 15.5–95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle guide with aluminum rail – Additional support table – Additional start/stop button on sliding table – Electronic digital cutting width readout on longitudinal fence – Electronic digital cutting width readout on auxiliary table Net price: 49,900 PLN Net price: 11,880 EUR (depending on the exchange rate, here calculated at 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA Lsdpfjx Arrhjx Affjak - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)