Used Scm Tech 99 L for sale (578)

Condition: good (used), functionality: fully functional, spindle diameter: 30 mm, milling spindle length: 140 mm, height adjustment type: electric, type of input current: three-phase, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, SCM T130E Spindle Moulder Spindle diameter: 30 mm Spindle length: 140 mm Variable spindle speed: 3000/4500/6000/7000/10000 RPM Main motor power: 7.5 kW Electronic spindle height adjustment via switch 4-roller feed unit Feed speed adjustment via variator CE certificate Itsdpfx Afexzyltefer DTR technical documentation

Condition: used, For sale: SCM planer machine. Technical condition: good; visually, the machine requires some refurbishment. Specifications: - 50 cm planing width - 4-knife cutterblock - Electric height adjustment - Tiltable fence - Motor brake not functioning Itsdpox Dr Eqofx Affjr The machine presents well and performs as it should. With a little attention, it will quickly look as good as new again.

Condition: used, Year of construction: 2008, IDM Level HD is an industrial single-sided edgebanding center designed for edge processing in standard furniture manufacturing. The HD model features a more robust construction, making it suitable wherever consistent edge quality is required at higher feed speeds. This machine enables complete workpiece processing in a single pass—from pre-milling and adhesive application to the final edge refinement. Owing to its modular arrangement of working units, the machine can process ABS/PVC edges as well as veneer. The machine is pre-owned, fully cleaned, inspected, and ready for installation. Technical specification: • Pre-milling unit: 2 counter-rotating motors to trim the leading edge before edgebanding • Gluing unit: EVA glue pot, electronic temperature control • Pressure zone: main pressure roller + additional pressure rollers • End trimming saws: 2 motors, clean trimming of edge ends Itsdpfx Afsxztmdofjr • Top and bottom trimming units: profiling, precise trimming of ABS/PVC edge • Front corner rounding unit: radius machining of panel corners • Rear corner rounding unit: finishing of corners at workpiece outfeed • Radius scrapers: final smoothing of edge radius • Flat scrapers: finishing of edge surfaces • Buffing unit: 2 discs for final polishing of the edge • Complete extraction system: connection points for all working units • Pneumatic pressures and adjustments: secure workpiece hold and precise regulation • Manual fine adjustment: analog readout wheels and micrometric adjustments for precision set-up

Condition: used, Year of construction: 2019, functionality: fully functional, We hereby offer this used SCM Gabbiani PT beam saw from 2019, located in Slovakia. This advanced woodworking machine is designed for high-speed panel cutting and features a cutting length of 3300 mm, ideal for processing large sheets with precision. It offers a fast carriage feed speed of 120 m/min, enhancing productivity, and is powered by a robust 7.5 kW main motor, ensuring reliable and consistent performance in demanding industrial environments. Included with the Machine: Diamond pre-cut. Main roll 10 pcs. Isdjxq Hn Hepfx Affstr

Condition: used, Ferwood Code: RU0001904 - Manufacturer Code: M75194400 - Condition: Used - Compatible Machine: SCM EDGE BANDING MACHINE - If interested we offer an overhaul service, contact us. Iedpfx Aevazlpeffotr

Condition: used, heavy-duty surface planer SCM F 520 planing width 520 mm table length 2,960 mm hydraulic height adjustment of infeed table via foot pedal, with micrometer display for chip removal 4-knife safety cutterblock sharp and hollow joint adjustment Isdpsxzdguofx Affetr main motor 4 kW electric motor brake CE version Machine is FULLY FUNCTIONAL and in GOOD CONDITION from vocational school available from stock in Lieboch

Condition: used, Year of construction: 2001, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA1/011994 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Itodpfsxzcnkex Affor Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Itodpsxy Tmnofx Affsr

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit Itjdpjx Dcn Njfx Affsr - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: excellent (used), Year of construction: 2018, SCM Línvicilbe SI3 Panel Saw Type: SI 3 Year of manufacture: 2018 Control: 3-axis Length of aluminium table: 3,200 mm Cutting width right of the saw blade: 1,500 mm Motor power: 7 kW (minimum) Scoring unit Saw blade diameter: 400 mm Maximum cutting height: 140 mm Touchscreen with operation for: Itjdpsx Dbi Esfx Affor Automatic height adjustment Automatic tilt adjustment Automatic parallel fence

Condition: used, Ferwood Code: RU0001905 - Manufacturer Code: M75194500 - Condition: Used - Compatible Machine: SCM EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Itodpfevazk Ejx Affsr

Condition: like new (used), working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Itsdpfx Afox Daz Hefjr

Condition: used, Year of construction: 2016, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, Empty weight: 1.310 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets Itsdpfjxy Rk Rox Affjr

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm available as an option) · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm positive fit · Pneumatic feed stroke: 60 mm Grooving saw unit in "X": · Integrated in the drilling head · Grooving saw blade with a maximum diameter of 120 mm Main milling unit: · Tool interface HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) · Right-/left-hand rotation · Ceramic bearings · Prepared for use with angle drives Tool changer TR10: Automatic lateral tool changer for 10 tools. Iodpfx Asxy Ndieffotr · Number of tool positions: 10 · Maximum tool diameter: 120 mm · Maximum weight per tool: 4.5 kg · Maximum total tool weight: 28 kg A central extraction port collects all processing units into a single connection with D=200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. TVF worktable: The worktable is designed to provide the operator with maximum "freedom of movement." The vacuum quick-clamping system offers maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports, L=1100 mm, infinitely adjustable in X · 12 TVF vacuum cups 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · Retractable reference stops controlled via CNC Automatic central lubrication: The correct amount of lubricating grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. negative pressure (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction port Ø: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Negative pressure: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L=1,100 mm and 18 vacuum cups 120x120 mm Cross lasers for vacuum cup positioning Two cross lasers mounted on the unit carrier allow for easy positioning of the vacuum cups. Location: Nattheim

Condition: excellent (used), Multi-spindle drilling machine SCM Type FM 29/S 29 spindles Distance 32 mm Table 1200 x 780 mm Max drilling depth for vertical drilling 100 mm/ horizontal 60 mm Spindle speed 3800/min Isdpfx Asvxtfrsffetr

Condition: excellent (used), Four-side planer SCM Compact 23 Working width: 230 mm Working height: 120 mm Ijdpfx Aexyv A Eeffjtr Number of spindles: 4 Spindle arrangement: Bottom Right Left Top Spindle speed: 6000 rpm Two feed speeds: 6–12 m/min Adjustable spindles

Condition: used, functionality: unexamined, Ferwood Code: RS0000797 - Manufacturer Code: 2987540023L - Condition: Used - Functionality: Not tested - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Ijdpfxjvvad Nj Affotr

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Itsdpfx Aow Dccceffjr

Condition: used, functionality: unexamined, Ferwood Code: AGG0014 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC SCM - If interested, we offer a refurbishment service, please contact us. Weight and transport dimensions: 3.5 kg 36x26x21 cm Itodpjvu Ahnefx Affor

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Itodpfx Aow Dcb Seffjr

Condition: used, Ferwood Code: RU0010598 - Manufacturer Code: G042300060 - Condition: Used - Compatible Machine: SCM EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Itjdovazhdopfx Affsr

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Itsdpfxexq Apgj Affjr

Condition: used, functionality: unexamined, Ferwood Code: RU0010598 - Manufacturer Code: G042300060 - Condition: Used - Functionality: Not tested - Compatible Machine: SCM OLIMPIC/K800/K1000 EDGE BANDING MACHINE - If interested, we offer a revision service, contact us. Ijdpfsv Iz Slex Affjtr

Condition: used, Year of construction: 2022, Sliding table: 3200 mm, cutting width: 1000 mm, CNC parallel fence, scoring unit, angle stop with digital display, electro-motorically tiltable and height adjustable, control panel at eye level. Storage location: Nattheim. Itjdexqtvqjpfx Affsr

Condition: used, Ferwood Code: RU0011365 - Manufacturer Code: 0000506990B - Condition: Used - Compatible Machine: SQUADRABORDA SCM/STEFANI - If interested we offer an overhaul service, contact us. Isdpfxsva Avcs Affotr