Used Schaffer 3550 for sale (202)

Condition: good (used), dimensions (l x w x h)approx. : 3550 x 2400 x 2300 mm weight approx. 7000 kg coil weight : 6000 kg: Coil width 1250 mm Hodpohhyzcjfx Adajh Max coil diameter: 2500mm Coil inside diameter: 480-510mm Without control cabinet!

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 23130745, total length: 3,500 mm, total width: 1,550 mm, total height: 2,570 mm, power: 1,351 kW (1,836.85 HP), fuel type: electric, volume flow: 2,239 m³/h, pressure (max.): 28 bar, Used Frick / York SGC 2313 - Sabroe SAB 233 S screw compressor skid for R717 (ammonia). Complete with a Schorch DQ7250S-PB83P-Z electric motor – 60 Hz – 110 kW – 3550 rpm with additional cooling, Sabroe OHU 07629 oil separator with a capacity of 1371 liters, Sabroe OF 2111 oil filter, Vahterus PSHE 3HH-66/2/1 Q-plate oil cooler, oil pump, and a Unisab 3 controller. The compressor has a displacement of 2239 m³/h. Capacity: 1351 kW at -6.7 °C/+35 °C. Hodpjxyk Enefx Adash

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 412 kW (560.16 HP), type of cooling: air, overall weight: 3,550 kg, total width: 1,900 mm, total length: 5,370 mm, total height: 2,420 mm, AIRCOOLED CHILLER HITACHI RCUE 412 kW Cooling capacity: 412 kW(12/7 — 35°C) Hsdpfx Adsxxwfleaeh Year of manufacture: 2009 Options: with economizer Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Hitachi (screw) Number of fans: 12 pcs. Type of refrigerant: R407C Dimensions: 5.37 x 1.90 x 2.42 m. Weight: 3550 kg. Working hours: 29382/21390 h. Condition: Very good

Condition: used, Year of construction: 2006, Item: AV-12167-AV2168-50m3 Pressure Tank Capacity: 49,900 L Exterior Dimensions: Diameter Ø 3500/3550 mm, Total Height 6200 mm. Used, vertical, identical stainless steel pressure tanks – 2 pcs. Insulated with Armaflex. Ø 600 mm manhole located in the lower part of the cylinder. Year of manufacture: 2006 Test Pressure: 2.86 bar Material: AISI 304 Vertical Stainless Steel Pressure Tank – 49,900 L (TÄNKKI, Finland) High-quality vertical pressure vessel manufactured by TÄNKKI Oy, Ähtäri, Finland. Constructed in accordance with EN 13445-3 and CE certified (Notified Body 0875) for use with non-hazardous liquids (Group 2). Technical Specifications Manufacturer: TÄNKKI Oy, Ähtäri, Finland Year of manufacture: 2006 Serial number: 2344/06 Volume: 49,900 liters (≈ 49.9 m³) Design pressure: 2.0 bar(g) Test pressure: 2.86 bar(g) Hodpfx Ajv Tnqlsdajh Temperature range: 0 °C to +50 °C Design standard: EN 13445-3 (PED compliant) Media group: 2 (non-hazardous liquids) Orientation: Vertical, self-supporting construction Description This vertical stainless steel pressure tank is engineered for low-pressure storage and processing applications, making it ideal for water, milk, whey, or other food and process liquids. The tank is constructed from premium-grade stainless steel, guaranteeing long service life, durability, and full compliance with EU PED regulations.

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm Hsdpfx Adevxwqfoash stroke 250 mm work height max. 900 mm weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic stamp clamping WILA hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices

Condition: refurbished (used), Year of construction: 1999, operating hours: 11,000 h, functionality: fully functional, Sabroe SAB 128HF Refrigeration compressor Fully revised 110kW motor 400/440v/3-50/60hz 2950-3550 rpm. Refrigerant: HFC or R717 (Nh3) Hsdpfjxw Tqusx Adaeh

Condition: used, Year of construction: 2006, BIGLIA B 301 M LATHE Max. bar working diameter: 42 mm Max. chuck working diameter: 220 mm Max. working length: 380 mm Max. swing diameter: 400 mm MAIN SPINDLE: Variable speed range: 100-5000 rpm Spindle nose: ASA 5" Spindle bore: 55 mm Front bearing inner diameter: 90 mm Chuck diameter: 165/210 mm Motor power: 11-15 kW (50%) TURRET: Number of positions: 12 Type: bidirectional External tool shank: 20x20 mm Boring bar shank: Ø25, Ø32 mm Indexing time (1 position): 0.15 sec LIVE TOOLS: Number of positions: 12 Variable speed range: 50-4000 rpm Motor power: 3.7 kW (50%) HYDRAULIC TAILSTOCK: Automatic quill stroke: 100 mm Morse taper: No. 4-5 Manual positioning: 380 mm Hodpfx Adsxw Eabjaoh AXES: X axis travel: 160 mm (145+15) Z axis travel: 380 mm (360+20) B axis travel: 440 mm DIMENSIONS – WEIGHT: Overall size with chip conveyor: 3500 x 1754 x 1935 mm (H) Weight with chip conveyor: 3550 kg

Condition: excellent (used), Year of construction: 2011, 5-axis gantry machining center for the production of components for chairs, tables, doors, etc. from wood and MDF Max. useful working area (X-Y-Z) mm: 3550 x 1800 x 750 Spindle power: 2 x 7.5 KW Spindle speed: 2000 - 18000 rpm Hsdpfxexau Uye Adajh Equipment: Frame 2 x movable loading tables 4-spindle head 2 x loading magazines Numerical controller Electrical cabinet Control panel Protective cabin

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm Hsdpfsnygvrsx Adaeh 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: good (used), Code: 0060 Brand: SAOMAD Model: UTP 150/6 - CE Standard Tenoning machine for wooden frames, doors - CE Standard Technical data: Circular saw unit: Blade diameter mm 400 F30 - Motor Hp 4 - Cutting height mm 125 - Horizontal shifting mm 150 Hedpfx Asv Hqfxjdaoh Cutterhead unit: Cutterheads lenght mm 150 - Max opening between cutterheads mm 185 - Cutterheads diameter mm 160 - Motor Hp 3 - Horizontal cutterheads adjustment shaft tenoning unit: Shaft diameter mm 35 - Useful working length mm 160 - Motor Hp 5,5 - Vertical and horizontal adjustment - Max tool diameter mm 320 Manual tilting tenoning carriage mm 600 x 600 Pneumatic workpiece holders Inclinable graduated fence +/- 45° Sliding safety guards N° 3 suction ports diameter mm 140 N° 1 suction port diameter mm 80 Compressed air 6 atm Overall dimensions mm 3550 x 1400 x 1600 h

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB Hodsxluzwepfx Adaoh ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant unit Hsdjwyn Rqepfx Adash - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself.

Condition: like new (used), Year of construction: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe Siemens Sinumerik 810 DL Control Year of Manufacture: 2001 Very Good Original Condition Technical Specifications: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Centre distance: 750 mm Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min Rapid traverse X: 8 m/min Rapid traverse Y: 10 m/min Spindle nose DIN 55027 size 6 Spindle bore: 52 mm Drive power (100%): 7 kW Speed range: 14–3550 rpm (2 ranges) Tailstock quill diameter: 70 mm Hodswx Rbpopfx Adajh Tailstock quill stroke: 120 mm Tailstock taper: ISO MK 5 Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Accessories and Equipment: About the Machine: Offered here is a Gildemeister NEF 320 K cycle-controlled lathe with cycle control, year 2001, in very good original condition. The machine is, of course, fully operational. The slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is very user-friendly and allows for surface finishes similar to grinding. The machine comes from a training workshop of a large industrial company. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, - Max. Tragkraft 2500 kg - höhe 5.85 m - Max. Reichweite 3.40 m - Ausbrechkraft mit Schaufel 3427 daN Hjdpfx Asxd E Iledash - Aufwärtsneigewinkel 12 ° - Abwärtsneigewinkel 117 ° - Wenderadius (über Räder) 3.31 m - Gewicht 4800 kg - Bereifung Pneumatisch - Heben 8 s - Senken 5.40 s - Teleskop ausfahren 5.60 s - Teleskop Einfahren 4.30 s - Ankippen 3.50 s - Auskippen 3.60 s - Hersteller Kubota - Motornorm Stage V, Tier 4 final - Zylinderzahl / Tragfähigkeit der Zylinder 4 - 3331 cm³ - Nennleistung Verbrennungsmotor - Leistung 75 Hp / 55.40 kW - Max. Drehmoment / Motorumdrehung 265 Nm @ 1400 rpm - Zugkraft 3550 daN - 12V Batteriekapazität 110 Ah - Getriebetyp Hydrostatisch - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. Fahrgeschwindigkeit 24.90 km/h - Max. Fahrgeschwindigkeit (kann je nach geltenden Vorschriften variieren) 25 km/h - Parkbremse Automatische negative Parkbremse - Festellbremse Ölbad Lamellenbremsen an den Vorderachsen - Hersteller der Achsen Dana - Typ Hydraulikpumpe Zahnradpumpe - Hydraulikfördermenge / Hydraulikfördermenge – Hydraulikdruck 90 l/min-235 bar - Motoröl 11.20 l - Hydrauliköl 115 l - Fassungsvermögen des Kraftstofftanks 63 l - Geräuschpegel im Fahrerstand (LpA) 76 dB - Umgebungsgeräusch (LwA) 104 dB - Schwingungsbelastung Hand/Arm < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Antriebsräder (vorne / hinten) 2 / 2 - Sicherheit / Kabinen-Zertifizierung Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 - Steuerungen JSM

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ Hsdpfjxd D Spjx Adash ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: new, functionality: fully functional, machine/vehicle number: VF630N368RD002314, mileage: 250 km, power: 323.62 kW (440.00 HP), first registration: 09/2025, fuel type: diesel, maximum load weight: 26,000 kg, tire size: 385/65 R22.5 + 315/80 R22.5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2024, warranty duration: 24 months, Equipment: ABS, air conditioning, compressor, cruise control, differential lock, low noise, navigation system, onboard computer, retarder, soot filter, traction control, trailer coupling, New and fully equipped Renault C440 6x4 with Palfinger container hook system and hydraulically extendable bumper Hjdpou U I Disfx Adaoh

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VF610A369PD041734, mileage: 75,000 km, power: 353.04 kW (480.00 HP), first registration: 07/2023, fuel type: diesel, overall weight: 19,000 kg, tire size: 385/55 R22.5 - 315/70 R22.5, wheelbase: 3,800 mm, fuel: diesel, fuel consumption (combined): 22 l/100km, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: ABS, additional headlights, air conditioning, compressor, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, spoiler, traction control, trailer coupling, Renault T High 480 Turbo Compound with aero pack Hedjuivwyopfx Adaeh

Condition: used, Year of construction: 2004, Kieselguhr settling tank with 4.45 m³ capacity Additional title: KG settling tank Content: 4450 l Max. working pressure: 80 °C Length: 1710 mm Width: 1710 mm Height: 3550 mm Weight: 450 kg Material: stainless steel 1.4301 Position: vertical cylindro-conical tank Base construction: on pipe feet Features: manhole on top, 4 shell-de-watering-connections, 4 aeration-connections at the cone Hodow Uc Thjpfx Adajh

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm Hjdpfx Ads Dqaqoash electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Condition: ready for operation (used), Refrigerant compressors system Bitzer Type: HSK 6461-60-40P (x3) Volume: 165 m3/h (x3) Cooling capacity for R404A: 426 kW at 0°C/40°C, 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3550 x 1050 x 1880 mm Hedotqcqaepfx Adaoh Refrigerant tank in set Items in magazine: 2 Reference number: Z77 Condition: Used in good condition

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min - Drive output: 6 kW - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Accessories and Equipment: Hjdow Sv Iaepfx Adash - HS 401 contour control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Hsdpfow I Ui Ujx Adaeh Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: ready for operation (used), Rail-mounted chain hoist, Overhead crane, Suspended crane, used equipment Manufacturer: Movomech Overall dimensions: 3550 x 300 x 250 mm Weight: 38 kg Hodpfxovrzdvo Adaoh Load capacity: 63 kg Rail length: 3550 mm Hoist: Electrically powered chain hoist Chain length: 7 m Electrical specifications: 230/400 V; 50 Hz; 1.35 A

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm Hodpfod Ih S Usx Adajh distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Hjdpfxswrybro Adash Operating hours 3,093 hours Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.