Used Sbc 990 for sale (457)

Condition: good (used), Year of construction: 1990, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, Hyster H3.00XL Duplex 400, 3rd Function, Isuzu Diesel, 1990 Klodjx Hr Ugepfx Ah Nsl Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a varied stock of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Ferwood Code: RU0005107 - Manufacturer Code: 2990321075L - Condition: Used - Compatible Machine: CNC SCM - Weight: 2KG - Dimensions: 20X20X20 - If interested we offer a revision service, contact us. Kljdpfx Asvay S Uoh Nsl

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage compression mobile piston compressor Klodpfx Ahsvl Ev Ae Nel The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 674 l/min., filling capacity 505 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1 , Engine power 4 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: NOH336-41, ABUS ELV overhead crane, crane runway, bridge crane, workshop crane Load capacity / lifting capacity: 5t - 5000kg Span: 12,990 mm, outer dimension approx. 13,250 mm Year of manufacture: 2005 with radio remote control Lifting height: 6 m Construction height (top of crane to hook): approx. 850 mm Main girder length incl. buffers: approx. 260 cm Kodpfjx Azrdox Ah Noll Crane is dismantled and immediately available Very good condition, inspection logbook available Column-mounted and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please inquire with postcode Collection preferred

Condition: used, mileage: 479,242 km, power: 345 kW (469.07 HP), first registration: 03/2017, fuel type: diesel, number of seats: 59, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, = Further options and equipment = - DVD - Front refrigerator - Retarder - Sleeper cabin - Toilet - USB connections - Webasto auxiliary heater = Further information = Height: 375 cm Damages: none = Company information = We are an international company based in Belgium, approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for buying and selling used buses, featuring a large lot that serves as a permanent exhibition area. We always have a wide range of buses in stock, covering all brands, capacities, models, and price ranges. We can help you find the right coach, school bus, or city bus tailored to your requirements and budget. All information is provided without guarantee. Errors, prior sale, and typographical mistakes reserved. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more. Ksdpfx Aex Ai Iaoh Nsll

Condition: used, Used gitter box directly available at Kruizinga. Kjdpjx Ahr Dsfx Ah Nsll nl. This high quality steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackable capacity. This mesh container is ideal for small parts and very practical to use because of the 2 steel

Condition: used, Batch offer of 10 used Poolgitterbox DB according to UIC standard 435-3 Kledpfjx Ahtbex Ah Njl Buy your used DB gitterboxes directly from Europe's largest supplier. This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh

Condition: used, Lot offer of 4 used pole gitterbox DB according to UIC standard 435-3 Kljdpfxox Ahths Ah Njl Buy your used DB gitterboxes directly from Europe's largest supplier. This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh

Condition: used, L: 2000, W: 1150, H: 1800 (mm). Product: Roll cage. Type: Furniture roll container. Version: L-nestable and stackable . Group: Furniture roll container. Material: steel. Floor: wood. Kodpox Ahtuofx Ah Noll Colour: blue. Ral colour: 5012. Surface treatment: painted. Internal length (mm): 1900. Internal width (mm):

Condition: used, Used Pool gitterbox DB according to UIC standard 435-3 Kedpfxox Ahr Ro Ah Njll Buy your used DB gitterboxes directly from the largest supplier in Europe. This steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh container is

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Technical data: Mains voltage 3x400V Klodpfx Aoxwmb Tjh Nsl Frequency 50Hz Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Subject to errors and prior sale

Condition: used, Heidelberg KSB Cylinder Automatic die cutting machine Max Sheet Format: 40 x 57 cm (approx. 15.75 x 22.44 inches) Min Sheet Format: 12.5 x 15.0 cm Kodpexz D Dajfx Ah Njll Speed: Approx. 5,000 sheets/hour Weight: ~3,500 kg

Condition: used, tank capacity: 180 l, GENERAL INFORMATION Design: upright Remarks: Handhole diameter 200 mm Speed: 224 rpm Inner diameter: 640 mm Total height: 1,950 mm Power: 0.55 kW Agitator: propeller type Kledpfx Ahjxqduds Nsl Support: feet Location: Bremen Volume: 180 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: handhole Outlet: DN40 DIN 11851 Note: light residues MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Voltage: 220/380 Volts Agitator positioning: eccentric on top head

Condition: used, tank capacity: 180 l, GENERAL Equipment: Butterfly valve Design: Vertical Notes: Handhole diameter 200 mm Speed: 945 rpm Internal diameter: 640 mm Total height: 1,880 mm Power: 2.2 kW Agitator: Propeller Stand type: Feet Kljdpfxexqdt Te Ah Nel Location: Bremen Volume: 180 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: Handhole Outlet: DN40 DIN 11851 Remark: Light adhesions MATERIAL SPECIFICATIONS Material of feet: Stainless steel AGITATOR Voltage: 220/380 V Agitator arrangement: Eccentric in the upper head

Condition: used, tank capacity: 700 l, GENERAL Equipment: Ball valve Design: Upright Remarks: Outlet fitting is lower than foot ends (please take into account when installing); 1 bolted lid segment at the top edge (remaining area is open); see photos Speed: 900 rpm Internal diameter: 950 mm Total height: 1,570 mm Power: 0.55 kW Agitator: Propeller Base type: Feet Location: Bremen Volume: 700 liters Product-contacting material: V2A 1.4301 (AISI 304) Condition: Used Cylindrical height: 1,000 mm TANK Kodpfxjxqdt Hs Ah Nell Number of feet: 3 pcs EQUIPMENT Outlet (alternative entry): 25 mm MATERIAL QUALITY Foot material: Stainless steel AGITATOR Voltage: 230/400 Volt

Condition: used, tank capacity: 330 l, GENERAL INFORMATION Equipment: Disc valve Design: vertical Remarks: Tank slightly out of round; 1 welded bottom bearing inside the tank (see photos) Internal diameter: 780 mm Total height: 1,260 mm Top: open Kjdpexqdttjfx Ah Njll Standing type: mobile on castors Location: Bremen Volume: 330 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 690 mm TANK Number of legs: 4 pcs EQUIPMENT Outlet: DN65 DIN 11851

Condition: used, tank capacity: 170 l, GENERAL INFORMATION Design: upright Remarks: Tank slightly out-of-round Internal diameter: 780 mm Overall height: 830 mm Top: open Support style: height-adjustable feet Location: Bremen Volume: 170 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 350 mm TANK Number of feet: 3 pieces EQUIPMENT Outlet (alternative entry): 36 mm Ksdpfjxqdtmox Ah Noll MATERIAL QUALITY Leg material: stainless steel

Condition: new, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 62538, total width: 1,200 mm, total length: 1,500 mm, total height: 170 mm, overall weight: 10,000 kg, sheet thickness aluminum (max.): 2 mm, type of input current: three-phase, For sale is the automatic box bending and panel bending machine shown in the picture. Completely new condition, selling due to lack of use. Very fast and functional bending machine suitable for bending large series of boxes, panels, thin sheets. It has an electric servo drive, so the bending result is fast. Use: for bending wardrobes, kitchen appliances, electrical cabinets and other thin sheets. Machine features: -10 axes -Total width: 1500mm -Opening (Maximum height between lower and upper tool) -Bending thicknesses: Steel (dc01): 1.5mm Stainless steel: 1mm Aluminum: 2mm -Minimum bending dimensions for parts 340mmx340mm Ksdsv S Exdopfx Ah Nsll -Maximum sheet length 1600mm Weight: 10 Tons

Condition: ready for operation (used), functionality: fully functional, Lutetia Tumbling Machine Type 1 "15990" The Lutetia Type 1 "15990" vacuum tumbler is designed for food processing professionals who demand high marinade quality and production performance. This model can process up to 400 kg of meat and brine per cycle, making it an ideal solution for medium-sized processing facilities. Its 950-liter drum volume provides ample capacity for vacuum marination operations, ensuring consistent processing and repeatable results. Kodpfx Aexrt Ddsh Nsll Thanks to its compact design (2150 × 1230 × 1730 mm) and a weight of approximately 800 kg, this tumbler can be easily integrated into an existing production line. In addition, vacuum technology improves brine absorption, enhancing the texture, flavor, and added value of the finished product. The robust internal components and durable construction guarantee extended service life, while rapid installation and simplified maintenance help reduce production downtime. Furthermore, the Lutetia Type 1 tumbler boosts overall productivity and profitability. Its fast and homogeneous marination process shortens cycle times, reduces material losses, and ensures consistent quality from batch to batch. As a result, production managers can focus on operational performance instead of frequent adjustments. This model is thus a valuable investment for any company seeking to optimize its marination process, enhance the value of its meat products, and maintain reliable production throughput. Technical specifications: - Lutetia Type 1 tumbler for meat - Vacuum operation - Year of manufacture: 2011 - Meat + brine capacity: 400 kg - Overall dimensions (L x W x H): 2150 x 1230 x 1730 mm - Weight: 800 kg - Volume: 950 L - Diameter: 972 mm

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Kodpfjxpxrhex Ah Noll Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: new, Description: Kedpfx Ahoxnqybj Nsll The universal model with V-belt drive and high-quality features, especially suitable for craftsmen, designed for use where air quality, durability, and efficiency are essential. Long service life thanks to high-performance units with low speed, safe transport and excellent stability due to large wheels with parking brake. Optimal cooling provided by a large fan wheel, aftercooler with cooling fins ensures low tank entry temperature and thus less moisture in the compressed air. Improved efficiency through optimized compressor units. Standard features include Condor pressure switch, manometer, pressure reducer with water separator, and quick coupling, motor with overload protection. Technical data: Intake capacity: 650 l/min Filling capacity: 520 l/min Max pressure: 10 bar Tank capacity: 90 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW / 400 V

Condition: excellent (used), GGM Gastro Chocolate Fountain Machine Kedpfxjnxi Inj Ah Nsll 6 Ltr capacity Single phase power Dimensions 300mm x 700mm Working perfectly

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Ksdpfx Ahogxi Ebo Nsll Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: used, Transnorm Rising falling Incline belt conveyor with arch GF 580+1990-600-500 RA2430 Technical data: Conveyor length (NL): 2570 mm ( 580 mm arch + 1990 mm riser segment ) frame width (NB): 600 mm, 750 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 1.6 m/s Drive: SEW gear motor Kledsw R Hkiepfx Ah Nol Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Bolt on knife unit To suit a Stahl T50/52 folder- Price £3,000   IN STOCK Kledpjq U Trhsfx Ah Nsl