Used Sawmill for sale (783)

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode 75 kW milling shaft Including hydraulics Ncedpeyaty Nsfx Ad Njl

Year of construction: 1992, condition: good (used), Machining for cut-off band saw in concentricity Ncjdpfx Adsfd Ibve Nol

Condition: excellent (used), Disc chipper with horizontal feed work type Bruks 1502M with chip screen type Bruks BS3. Electrical motor 55 kW. Electrical control cabin with starter included. Nsdpfoyaqbqjx Ad Nscl The chipper is suitable for sawmill waste and small diameter logs. Capacity up to 50 m3 ready made chips per hour. Infeed opening , width 440 mm, height 275 mm

Year of construction: 2022, condition: used, Belt conveyor ca.12 m Ncjdjtpg Ikopfx Ad Njl kicker Kickers mowed with 1 piece hydraulic cylinder Motor 2.2 kW

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg Ncjdovuhumjpfx Ad Nel The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Year of construction: 1994, condition: used, Edger line / automatic edger / double edger with measurement and automatic saw blade adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum pass-through width: 1000 mm Maximum cutting height: 120 mm 3 blades in total 2 blades adjustable Measurement system: Combimes with S-conveyor with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator Can be fully refurbished upon customer request. The plant has already been dismantled and is immediately available. Location: Austria, near Leoben Nedpfx Adjyam Iae Njcl

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Njdpfx Ador Hbcfs Njcl Rema system with measuring frame type 9001 Hydraulic log kickers

Year of construction: 1998, condition: ready for operation (used), spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information. • Capacities • Working width: 40–220 mm • Working height (longitudinal machining): 40–100 mm • Working height (cross machining): 40–100 mm (counter wood height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross machining) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 clamping claws • Length stop: with scale and reading magnifier for frame or sash outer dimensions • Counter: pneumatically clocked, 4 positions (not for studio windows), up to wood height max. 80 mm • Double part package: single or double part feeding, with cross separation and retention system • 1st piece (lying on the stop) wood width: 55–90 mm • 2nd piece wood width: 130 mm • Feed (longitudinal machining) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (infinitely variable via frequency converter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Machining units • Crosscut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool swing: max. 400 mm • Axial adjustment: pneumatic against 4-fold turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool swing: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic Njdpfx Asx S Sk Eed Nscl • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero swing circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For crosscut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 210 mm • Tool clamping length: 160 mm • Axial adjustment range: 90 mm • Radial adjustment range: 100 mm • Length tenoning and slotting spindle (640 mm tool clamping length, instead of 320 mm spindle) • Motor power: 15 kW • Spindle speed: 2925 rpm • Number of tool positions: 8 x 80 mm

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings Njdpfx Asx Edrrsd Nscl • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events • Extinguishing fires from a great distance / high water flow

Year of construction: 1978, condition: reconditioned (used), Planer thicknesser 600 mm, planing width 600 mm, planing height 180 mm, 3-knife cutterhead, cutterhead diameter 125 mm. Fully overhauled, technically sound and ready for operation. New electrical system, all required lubrication points present. Cast iron body, weight 890 kg. Foldable tables, table height adjustable. Grease nipples at all necessary locations. Nedpfxoyabltj Ad Nocl

Condition: used, Stretch wrapper Nedpfx Aeyaar Sod Nscl

Condition: used, Compressor Ncodpsyaak Iofx Ad Nsl Manufacturer: Atlas Copco Model: GX7 Hours used: 580 h

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Ncodpfox U Tfpex Ad Nel

Condition: good (used), Full line, semiautomatic, finished material 40–160 mm Ncjdpfxex U Eals Ad Nel

Condition: new, EXHIBITION MACHINE For sale is a new log band saw with a cutting length of 3,700 mm. The exhibition machine is in its original condition, so you have the full guarantee. - Max. log diameter 550 mm - Max. width of boards 530 mm - Max. cutting length 3,700 mm (3.7 meters), extendable! - Min. cutting length 900 mm (0.9 meters) - Saw band stroke min./max. = 20/540 mm - Max. cutting depth 220 mm - Wheel diameter/width = 400/25 mm - Motor power 5.5 kW (4.0 kW S1/100%) - Motor power height adjustment 0.12 kW - Saw band length 3,200 mm - Saw band speed 15 m/s - Total length of the basic version 4,600 mm (4.6 meters) - Weight approx. 350 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Ncedpsvy Ufvofx Ad Nel Related terms: band sawmill, log band saw, band saw, machine Reference: R-A0117

Condition: new, Year of construction: 2025, operating hours: 1 h, SPECIAL OFFER !!! Sawmill Viking VBS1100 SB(1) Ncedpfxox Uw Emo Ad Njl Condition: NEW! Log bandsaw with single-sided bandsaw blades. (Double cut, back and forth, possible for an extra charge!!!) Roller diameter: 950mm Bandsaw blades: double-sided = 160mm wide, single-sided = 140mm wide Feed speed: 0-60m/min. Log diameter: up to 1100mm Cutting length: 6m (up to 9m extension possible, not included) Total weight: 7500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser (video monitoring with surcharge) 22 kW saw motor Infinitely variable feed speed (0 - 60 m/min) Block manipulation: Hydraulic Trimmers, wet grinders, band saw blades, circular saw blades, etc. can also be purchased from Droste Schärftechnik. (Not included)

Year of construction: 2026, condition: new, functionality: fully functional, Technical details: for band saw blades up to 206 mm wide Pressure measurement in bar Positioning through blade displacement Technical details: Blade width: bandsaw blades 30 - 206 mm Blade thickness: 0.6 - 2.4 mm Blade length: 4,000 - 11,000 mm Working speed: 4 - 20 m/min. Rated voltage: 3AC x 400V, direction of rotation "right" Frequency converter adjustable in steps Exact hydraulic pressure difference readable via pressure gauge Adjustable pressure lever Levelling roller incl. Ncodpfxjx Uw Eao Ad Nel Anvil for repairing dents

Year of construction: 2025, condition: new, Multirip saw / Edger Max. cutting width 800mm Max. cutting height 90mm Division of cuts freely adjustable Up to 8 Circular saws possible Laser cutting position marking Ncsdpjx Uw Dijfx Ad Nol Perfect for Pallet Production The price is for the Machine only! The roller tables are optional extras and can be made to size and length as required.

Year of construction: 2025, condition: new, Resaw Horizontal - VIKI 750-80: Saw wheel diameter: 800mm Band saw width: 80mm Max. sawing width: 700mm Max. sawing height: 450mm Min. sawing height: 0,5mm Ncedpjx Uw Dcsfx Ad Nol Feeding speed: 0,1 - 20 Meter/minute Motor power: 22kW Feeding Motor: 1,5kW Dimensions: 2500x2700x2200mm Machine weight: 2000kg Blade tension: Hydraulic Digital control sawing thickness setting Optional Extras: - Automatic Forward and Reverse Feed - Double Pressrolls - 22kW Frequency converter in separate stand pult

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, pass-through width: 250 mm, overall weight: 650 kg, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Njdpfjxhc Tmox Ad Nscl Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Year of construction: 1976, condition: excellent (used), Full frame saw / frame saw BÖGLI KHV-700 Marathon Year of manufacture: 1976 75HP, 380V, 50Hz max. passage 710 mm stroke: 500 mm Nsdopyglispfx Ad Nocl with splitting wedge Marathon 2 very good condition - available immediately Location: Austria, near Feldkirch

Condition: new, Year of construction: 2026, I am selling a KUSING SPS-500 bottom crosscut saw. This is a fully electric, robust crosscut saw without the need to use compressed air to operate the machine. The machine offers an ideal solution for sawmills, primary processing of lumber, but also for any production that works with long prisms and needs to be precisely shortened to size, such as in the production of windows and doors. Thanks to the convenient, smooth stroke speed regulation, it is possible to simultaneously cut board material and prisms to size even with a weaker motor. Technical parameters: Motor power: 3 / 4 / 5.5 / 7.5kW Disc diameter: 500mm Cutting speed: 2 - 6s. Nodex Ut H Tjpfx Ad Nscl Maximum cutting height: 150mm Maximum cutting width: 350mm Individual cutting parameters can be customized. The price includes basic tables 2 + 2 m There is also a wide range of extension table configurations to choose from, whether it is digital stops, controlled stops, etc.

Condition: new, Year of construction: 2026, I am selling this excellent helper in a carpentry workshop or a smaller sawmill for preparing plastered lumber and producing boards. Nedpfx Adsx Utv Ie Nscl This is a double-blade edge saw / Rip saw KUSING OP-400 ECO. Motor power: 2x 4kW Maximum cutting height: 55mm Feed speed: 4-18 m/min Maximum material width: 600mm Maximum width between blades: 400mm The machine's primary purpose is as a complementary machine to smaller band saws. The machine rapidly speeds up the process of producing boards, saving time in their production. With a special option, it is possible to adjust and extend individual shafts by 55 to 105mm, thanks to which you can place up to 4 blades in the machine at once. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. KUSING OP-400 ECO Double-Blade Rip Saw Are you looking to speed up board production in your carpentry workshop or smaller sawmill? The KUSING OP-400 ECO is the perfect partner for preparing planed lumber and turning logs into boards quickly and efficiently. _____ Why Choose the OP-400 ECO? • High Productivity: Dual 4 kW motors ensure consistent cutting power, allowing you to process lumber faster than with a single-blade setup. • Versatile Cutting Capacity: o Max. Cutting Height: 55 mm o Max. Material Width: 600 mm o Max. Distance Between Blades: 400 mm • Efficient Feed System: Adjustable feed speed from 4 to 18 m/min gives you precise control over material flow for different wood densities and board thicknesses. • Expandable Blade Configuration: With the optional shaft-extension kit, you can extend each shaft from 55 mm up to 105 mm, accommodating up to four saw blades simultaneously. This means you can rip multiple boards in a single pass, dramatically reducing setup times. • Ideal Secondary Machine: Designed as a complement to smaller bandsaws—speed up your workflow by rough-cutting logs into boards before final dimensioning. Technical Specifications • Motors: 2 × 4 kW • Maximum Cutting Height: 55 mm • Feed Speed Range: 4 – 18 m/min • Maximum Material Width: 600 mm • Max. Blade Gap (between blades): 400 mm • Shaft Extension (optional): 55 – 105 mm (fits up to four blades) The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: new, Year of construction: 2026, I am selling this basic, easy-to-use brushing machine from the K1S-400 / K2S-400 model line. It is ideal for companies that are just starting with brushing or are looking for a low-maintenance machine to streamline their brushing process. This machine is well suited for sawmill operations that need to brush cladding or boards to enhance the material’s value. Main Advantages: • Easy Operation: Requires only basic maintenance. • Low Initial Investment: Minimal upfront costs. Ncedjx Utt Topfx Ad Njl • Long Service Life and Reliability: Built from durable materials and engineered for harsh operating conditions. Technical Specifications • Main Motor Power: 3–4 kW (adjustable as needed) • Shaft Length: 400 mm • Shaft Diameter: 40 mm • Tool Diameter: 250 mm • Machine Weight: 350 kg

Condition: new, Year of construction: 2026, I am selling this basic, easy-to-use brushing machine from the K1S-400 / K2S-400 model line. It is ideal for companies that are just starting with brushing or are looking for a low-maintenance machine to streamline their brushing process. This machine is well suited for sawmill operations that need to brush cladding or boards to enhance the material’s value. Main Advantages: • Easy Operation: Requires only basic maintenance. Ncsdpfx Adsx Uttte Njl • Low Initial Investment: Minimal upfront costs. • Long Service Life and Reliability: Built from durable materials and engineered for harsh operating conditions. Technical Specifications • Main Motor Power: 3–4 kW (adjustable as needed) • Shaft Length: 400 mm • Shaft Diameter: 40 mm • Tool Diameter: 250 mm • Machine Weight: 350 kg