Used Sawmill Alignment for sale (1,529)

Condition: used, Year of construction: 1995, operating hours: 37,000 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: crane, low noise, Well-maintained Wolf sorting truck. Being replaced by a new Baljer & Zembrod unit. Epsilon E380 crane. Concrete weights will be removed. Iedpfx Aezwd Dxsnzjig

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 222 h, load capacity: 4,100 kg, lifting height: 7,600 mm, fuel type: diesel, construction height: 2,420 mm, fork carriage width: 50 mm, empty load weight: 9,160 kg, drive type: Diesel, construction width: 2,390 mm, Telescopic handler, rigid frame Condition, technical: New Front tire size: TRELLEBORG - TH400 - 500/70 R24 164A8 Front tire condition: NEW Rear tire condition: NEW Rear work lights, front work lights, full cab, safety light, electrically heated rear-view mirrors, intelligent hydraulics, LED work lights, Iisdpfxjwqtx Ue Anzog telescopic boom, Easy Connect System ECS, regenerative hydraulics, vibration damping, hydraulic quick-change system, tilt function shut-off, JSM LED, 4 additional work lights, LED work lights front and rear on the cab, 2x LED each, front road lighting, radio USB, Bluetooth with external microphone 100W, Safeview camera package x2 rear right side, automatic air conditioning, air-suspended textile low-frequency seat Grammer Pack Elite, automatic wheel alignment, 7-inch display, manual hand throttle, Eco - Stop, flow limiter, height-adjustable automatic trailer hitch, 40 mm pin, TÜV preparation, 40 km/h, electrical connection at the boom head, accessory kit, return line, trailer hitch completion kit, Easylink STD module, chocks, operating manual, compressed air system, central lubrication system.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Ijdpfezwvtxsx Anzeig Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: reconditioned (used), Year of construction: 2025, briquette diameter: 100 mm, Equipment: cooling unit, emergency stop, Briquette press Di Più MB100 – Year of manufacture 2009 – Complete system with saws & accessories (Overhauled in 2026!) Briquette press Pawert SPM I-90/200 Overhauled in 2025 (Like new!) For sale are briquette presses of the type Di Più MB100, year of manufacture 2009 (overhauled in 2025/26), including saws, conveying equipment, and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, wood chips, and wood residues. --- Technical data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic ram press --- Equipment: Material hopper Conveying screws Hydraulic system Control cabinets Saws for cutting briquettes to length Iiodpfx Aozw T Dzonzeg Protective covers & safety systems Discharge units --- Scope of delivery: 3 complete Di Più MB100 briquette presses Saws Conveying equipment & accessories Spare parts upon request --- Application areas: Sawmills Wood processing industry Biomass plants Briquette production for energy & sale Location: on request Transport: Organization possible by agreement Price: on request Individual sale or complete package possible

Condition: used, Double tilt miter saw for elements with maximum length 1500 mm and maximum width 200 mm, used, tested. nr. 2 motors of 2 hp Iiedpfx Anszxg Euezeg

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Iiedpfx Anozwk D Sozsg Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements 2 grinding wheels included 1 L of ES12 emulsifying oil User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,834 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 2,200 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 8.25 R15, rear tire type: pneumatic tires (air-filled), rear tire size: 8.25 R15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,650 mm, total width: 2,100 mm, color: yellow, Equipment: CE marking, cabin, centralized greasing system, fork extension, lighting, pallet forks, # COMBILIFT C5000FSL | DIESEL | DUPLEX 4500 MM | FREE LIFT | FORK POSITIONER | FULL CAB 🚜 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a professional sideloader designed for the safe and efficient handling of long and heavy materials, this COMBILIFT C5000FSL is an excellent solution for demanding industrial applications. We are offering a used COMBILIFT C5000FSL diesel sideloader from 2018, equipped with a duplex mast, 4500 mm lift height, 2220 mm free lift, hydraulic fork positioner, and full operator cabin. Before delivery, the machine will undergo a comprehensive technical inspection, full service, and operational testing. 🔧✅ ## ⭐ KEY ADVANTAGES * 💪 5000 kg load capacity * ⏱️ Only 2849 operating hours * ⚙️ Reliable DEUTZ diesel engine * 📏 Duplex mast – 4500 mm * ↕️ 2220 mm free lift * ↔️ Hydraulic fork positioner * 🏗️ Full operator cabin * 📷 Camera system * 📦 1200 mm load platform * 🛡️ Warranty available * 🎥 Live online demonstration * 🚛 Direct delivery Iedpfx Anszwq E Aezeig * 🌍 Worldwide transport ## 📋 TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: C5000FSL Type: Sideloader Forklift Year: 2018 Serial Number: 40353 Capacity: 5000 kg Engine: DEUTZ Diesel Operating Hours: 2849 h Mast: Duplex Lift Height: 4500 mm Free Lift: 2220 mm Fork Positioner: Hydraulic Fork Positioner Width: 1350 mm Forks: 1200 mm | 150 x 50 mm Cab: Full Operator Cab Service Weight: approx. 9530 kg ## 📐 DIMENSIONS Overall Height: 2650 mm Lowered Mast Height: approx. 3170 mm Length: 4650 mm Width: 2100 mm Platform: 1200 mm ## 🛞 TIRES Front: Pneumatic Rear: Pneumatic Tires will be inspected during pre-delivery preparation. ## 🔧 PROFESSIONAL PRE-DELIVERY PREPARATION Before delivery, the forklift undergoes comprehensive inspection and servicing, including: * ⚙️ Engine and drivetrain * 💧 Hydraulic system, hoses, and connections * ⛓️ Mast, chains, and lifting components * 🛞 Steering system * 🛑 Braking system * ↔️ Forks and fork positioner * 🛞 Tires and wheels * ⚡ Electrical system * 💡 Working lights * 🦺 Safety systems * 🛢️ Oils, filters, and operating fluids The machine is operationally tested and prepared for immediate use at the customer's facility. ✅ ## 🏭 IDEAL FOR * 🪵 Timber and sawmill industry * 🔩 Steel mills and service centers * 🏗️ Structural steel * ⚙️ Metal and aluminum processing * 🔧 Pipes and profiles * 📏 Long steel sections * 📦 Long and bulky loads * 🏭 Manufacturing facilities The sideloader design makes the C5000FSL ideal for handling long materials while maintaining excellent maneuverability. ## 🏆 WHY FT LOGISTICS? We specialize in COMBILIFT forklifts, multidirectional forklifts, and sideloaders. Every used machine undergoes professional inspection, servicing, and testing before delivery. ## 🤝 WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty options 👨‍🔧 Technical support 💶 Leasing and financing 🚛 Worldwide transport 📄 Export and customs documentation 🎥 Live online demonstration 📸 Additional photos and videos # FT LOGISTICS 🚜🌍 We deliver machines that are ready to work. ✅

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Iiodpfx Anozdz S Tszog Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: used, Year of construction: 2005, functionality: unexamined, overall weight: 1,500 kg, total length: 1,250 mm, total width: 1,250 mm, plate height: 150 mm, plate width: 1,250 mm, plate length: 1,250 mm, Equipment: type plate available, FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System Description Manufacturer: FIBRO GmbH, Rotary Table Division Type: Precision Changeable Pallet 1,250 × 1,250 mm Year of Manufacture: 2005 Quantity: 4 pieces Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system. The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer. Iedpfozxz Azox Anzsig Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns. The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line. Technical Data - Quantity: 4 pieces - Dimensions per pallet: 1,250 × 1,250 mm - Height: approx. 150–160 mm - Weight: approx. 1,500 kg per pallet - Total weight of 4 pallets: approx. 6,000 kg - Pneumatic connection: 1 line per pallet - Indexing: P1 / P2 - Underside: 2 indexing rings per pallet - Clamping slots with hardened strips - Thread/hole patterns including M12, M20 and M30 - Customer-specific hole patterns - Original drawings or technical FIBRO documents available According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets. Factory/Serial Numbers 1817739 / 002 1817739 / 003 1817739 / 004 1817739 / 005 The pallets have partially different article numbers and different customer-specific hole patterns. Accessories: The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts. Condition: Used condition from industrial application. The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application. A current metrological check of the geometric accuracy has not been carried out. Sold in the existing condition and scope of delivery as shown in the pictures.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031812, empty load weight: 6,115 kg, maximum load weight: 28,885 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 40 %, ground clearance: 310 mm, color: red, Please note: the images are archive photos! The vehicle may currently be in use. #Chassis – haulage semi-trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Slightly tapered outer frame, new design with "Load-Lock-Profil" for lashing strap attachment 24 t 2-speed landing legs, single-side operation, with half-round foot and straight mounting plate, with thrust compensation Pull-out ladder at the rear "D-Lock" door retainer for I-Lock closure 2 wheel chocks with holder Pallet box (capacity: 24 Euro-pallets) "Heavy Blocker" rear underrun protection, transverse + lateral roller-type impact buffer 1 plastic tool box, w=600 / h=425 / d=460 mm Storage compartment for 32 slat boards under the loading floor Pallet stop on both sides, approx. 15-20 mm high, bolted design #Axles & suspension BPW disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally operable electrically from the truck, including forced lowering and pull-away aid #Braking system 2-line air braking system Colour-coded pipework for easy servicing Spring-loaded parking brake 2 anti-mismatch coupling heads at the front 24V EBS, electronic braking system with EBS socket at the front with lift & lower valve + auto-reset function Vehicle stability system #Wheels and tyres 385/65 R22.5" Polished aluminium rims, Alcoa Dura-Bright #Electrics 24V, LED multi-chamber lights, yellow LED side marker lights, number plate light 2 white LED front position lights 2 white/red LED outline marker lights at the rear 1 x 15-pin socket at the front LED work lights on both sides 2 additional LED work lights at the rear #Floor Plywood flooring approx. 30 mm thick, on longitudinal bearers for high point load capacity, for forklift axle loads up to max. 7100 kg Steel sheet covering fitted at the rear over approx. 300 mm Premium floor sealing – floor sealed all around #Front wall / front corner posts 2580 mm high, steel corner posts of box-section design, release mechanism for the side curtain at the front wall Crash-Blocker, steel impact protection on the lower inside, approx. 140 mm high #Centre posts 3 pairs of sliding posts, movable along the entire length 3 pairs of post positions #Slat boards Aluminium V-profile slat boards #Rear wall / rear corner posts Rear corner posts, steel, up to roof edge, curtain attachment with round tube and curtain tensioning ratchet Rear barn doors, 2-leaf Fliegl "I-Lock" integrated door lock, awarded the "iF Design Award" #Roof "Fliegl-Blitz-Verdeck" Sliding roof, rear end bow foldable, roof sheet slides from rear to front, L-shaped roof rail as used in the automotive industry Roof non-elastic, minimal deflection of the roof rail Anti-Ice System, with 1 central hose, automatic forced venting via the brake light Optimum rain gutter at the rear #Country of registration / plates Type approval per EC 2007/46 Fliegl manufacturer's certificate for body strength per EN 12642 XL Fliegl manufacturer's certificate for load securing per VDI 2700 sheet 12 ff. Warning board per ECE-70 Iiedpfxozxz R So Anzeg Please note: archive photos!

Condition: repair required (used), Year of construction: 2019, pressing force: 220 t, overall weight: 12,620 kg, controller model: Delem DA-66T, working width: 3,050 mm, number of axes: 6, The press brake cannot be aligned because the X and R axes are blocked. This is a machine that is to be repaired or is intended for a project. TECHNICAL DETAILS Number of axes: 6 Axes: Y1 + Y2 + X + R + Z1 + Z2 Press force: 220 t Max. working width: 3,050 mm Frame spacing: 2,500 mm Crowning system: CNC-controlled Ijdpfezuw Ewox Anzsig Ram holder: hydraulic Tool holder type: WILA standard MACHINE DETAILS Drive: CNC Control: Delem DA-66T Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 3,750 x 1,900 x 2,900 mm Weight: 12,620 kg Transport packages: 1 EQUIPMENT Tools

Condition: used, Approx. 60 double-meter (left + right) rails for log sorting carts immediately available Iisdpozuy Tqofx Anzog Location: Germany, near Lake Chiemsee.

Condition: good (used), The Esterer SS45 complete gate saw has undergone a complete technical overhaul. Iijdofvb Etspfx Anzeg Only the appearance of the gate is no longer in optimal condition. Passage width: 45 cm Speed: 340 rpm Stroke: 500 mm Includes complete mounting, saw blades, and templates Features hydraulic blade lifting Includes a splitting wedge Drive power: 30 kW Includes hydraulic unit Includes complete control cabinet Please also check my other listings. I look forward to your inquiry.

Condition: used, Year of construction: 2017, zpracování slabé hmoty - délka výřezů od 1300 - 4500 mm Iisdenqzkpepfx Anzeg - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti 137 / 5 000 Výsledky překladu Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HS-14E, overall weight: 185 kg, total width: 135 mm, total length: 144 mm, total height: 228 mm, fuel: electricity, SCHORR Log Splitter 14t HS-14E PRO Where conventional electric splitters with 12 tons reach their limit, the HS-14E goes further: 14 tons of splitting force drive the splitting wedge through hardwood, dry and knotted logs, evenly and without jamming. The powerful hydraulic cylinder with a 9.5 cm diameter reliably delivers the pressure, stroke by stroke. Splitting is done vertically with a splitting length of up to 104 cm: meter-long logs fit with room to spare, as do shorter sections from 56 cm. This allows you to quickly work your way through the pile of logs, piece by piece. The most strenuous part of the splitting process is not the splitting itself, but lifting the logs. The HS-14E is equipped with an integrated log lifter specifically for this purpose: hook the log, lever it, and the section aligns itself effortlessly into the splitting position, without straining your back and shoulders. When not in use, the log lifter serves as a stable protective bar on the machine. Operation is performed via the two-hand safety control, and the massive, robust design with a weight of 185 kg ensures a secure stand, even at full splitting force. The HS-14E does not require a tractor or a power take-off: the 400 V electric motor with 3.5 kW is connected to the standard 16 A socket and delivers its power quietly and without emissions. This allows you to split wood in the barn, in the hall, or on the farm, where gasoline engines would be disruptive and a tractor is not available. The technology is deliberately kept simple, robust, and repairable: hydraulics, steel frame, electric motor – no unnecessary frills. The HS-14E is delivered pre-assembled and with hydraulic oil already filled: simply connect it and start splitting. Wear and replacement parts are in stock, and we handle repairs in our own workshop. You buy directly from the manufacturer and receive personal advice. And for those who want to combine a power take-off and electric power, the HS-22PE with 22 tons is the larger model. Technical data -- Manufacturer: SCHORR -- Type: HS-14PE -- Splitting force: 14 t Iedpfxjzwmypj Anzeig -- Weight: 185 kg -- Drive: 400 V electric motor (3.5 kW, 16 A) Dimensions: -- Length: 1440 mm -- Width: 1350 mm -- Height: 2280 mm -- Splitting wedge: 17.5 cm -- Splitting diameter: max. 30 cm / min. 10 cm Your advantages at a glance -- Ready for immediate use – no long waiting time -- Massive design – 185 kg weight for maximum stability -- Comfortable log lifter for heavy wood -- Spare parts always available -- Competent service & advice Whether delivery or collection in 48465 Schüttorf – we offer the right solution.

Year of construction: 2013, condition: excellent (used), HewSaw SRC200/250 Iiedpfjzwnbhsx Anzeg

Condition: used, Cross conveyor, 4-strand Iedpfx Aszx Eh Ujnzjig Conveyor length: 2.3 m Width: 4.2 m Location: Germany, near Lake Chiemsee.

Condition: used, Track-mounted/transverse conveyor, driven 3-strand configuration Length: 4.0 m Width: 2.55 m Track gauge: 1.85 m Iodpszx Efgsfx Anzjig Location: Germany, near Lake Chiemsee

Condition: used, Powered roller conveyor Length: 9m Width: 1.4m Roller width: 1.2m Iijdpfozx Ef Tex Anzsg Location: Germany, near Lake Chiemsee

Condition: used, Convey grain, pellets, biomass, or other dry bulk materials pneumatically using a heavy-duty industrial fan, when lightweight extraction fans are insufficient. This Reitz Umwelttechnik fan was used for pneumatic material conveying in our own facility and is fully functional. It has a flow rate of approximately 9,600-10,000 m³/h, direct drive, and a 700 kg welded steel construction mounted on a mobile, liftable base frame. Nameplate photos and technical documentation are available; inspections are welcome. Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited; loading this 700 kg unit must be scheduled. Best for: pneumatic conveying of dry bulk material, high-volume industrial ventilation, and process air where lightweight extraction fans are inadequate. Not suitable for: wet or sticky materials, air above 80°C, or applications requiring formal ATEX certification unless independently verified. What the specifications mean in practice: • 160-167 m³/min (~9,600-10,000 m³/h) - provides sufficient airflow to convey material through piping, not just extract dust. • 223-250 daPa total pressure increase - maintains material flow over distance and through bends. • Direct-driven 24.5/28 kW motor - eliminates the need to tension, align, or replace belts. • 700 kg welded steel housing, backward-curved impeller - designed for continuous industrial operation. Ijdozx Ebzjpfx Anzeig • Mobile, liftable base frame - can be moved into position using a forklift or crane. • Max. 80°C, up to 3100 rpm - suitable for ambient and moderately warm process air. What you get: the complete fan unit with backward-curved impeller, motorenmaier 24.5/28 kW three-phase motor (IP55, 400/690V), and welded base frame, ready for connection. Note: the safety plate refers to explosion-protection instructions. If formal ATEX certification is relevant to your application, it should be independently verified. Technical data (from nameplate): Manufacturer: Reitz Umwelttechnik | Type: MSE 025-016030-00 | Serial/Year: 567856 / 2009 Volume flow: 160-167 m³/min (~9,600-10,000 m³/h) | Total pressure increase: 223-250 daPa | Shaft power: 8.7-11 kW Speed: 2915-2925 rpm (max. 3100) | Max. temperature: 80°C Drive motor: motorenmaier gmbh, Type 7AA160L-02V, 24.5/28kW, 2-pole, IP55, 400/690V | Weight: 700 kg Condition: Used, functional, previously used for pneumatic material conveying. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured in 2009 (serial 567856) by a reputable German manufacturer, used in our own facility, fully functional, and can be tested before pickup. Nameplate photos and technical documentation are available; in-person inspections are possible in Kerns OW by appointment. You can verify the identity, condition, and operation before making a purchase. Why buy now: this is a single, used machine, not stock – once sold, this specific configuration is no longer available; a 700 kg fan on a base frame is not an item we typically restock. First-buyer bonus: free loading with our forklift at no extra cost. Valid until September 9, 2026, or until sold. Action: please provide your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 1992, functionality: fully functional, power: 330 kW (448.67 HP), control type: PLC-controlled, actuation type: hydraulic, For sale is a used Quattro Spaner bandsaw, Super 40 model, manufactured in 1992, consisting of: - Spaner - Centering unit - 4-bandsaw system Super 40 This system is particularly suitable for the efficient cutting of light to medium-strength round timber and enables precise and efficient processing in a compact design. Technical data: Iiodpfxszvx Shj Anzsg Max. round timber diameter: 58 cm → Debarking up to 42 cm Min. round timber diameter: 13 cm → Debarking up to 8 cm Feed rate: up to approx. 59 m/min → Reduced to approx. 20 m/min for large cross-sections Daily output: approx. 250–300 cubic meters/day → Depending on round timber diameter and cutting Condition and previous use: The system was in operation at a sawmill with an annual production of approximately 50,000 cubic meters in a single-shift operation until summer 2025. It was regularly maintained until it was taken out of service and was fully functional. However, due to its age and for reliable long-term operation, a complete overhaul is necessary. An inspection of the system for sale is possible by arrangement. An identical Quattro system, which has already been completely overhauled, can be inspected on-site during ongoing production. This allows interested parties to gain a clear picture of the system's performance and potential applications after an overhaul (see photo). Price on request. We will gladly send further technical information as well as photos and videos upon request. Inspection is possible after prior appointment.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. Iodpfezwdv Ujx Anzeig BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D Iodpezuygqjfx Anzeig • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K, 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. This system is ready after completing our full maintenance programm. This machine is therefore ready for a demo! Year of built 2013 6 station base Configuration: Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turning module Alignment module Conveyor belt Ijdpezv Trcsfx Anzoig Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base Iisdpfx Ajzv Tz Ronzeg 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just passed through our complete maintenance program. The machine is therefore 100% complete works like new. Please come over for a test if you like.