Used Sawmill Alignment for sale (1,368)

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers Dksdpjmv Ehzjfx Ac Nsh - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: excellent (used), Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle - German production - measuring the length of the wood Dsdpfxjlimrie Ac Nekh - automatic cutting cycle TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225" - rotating head 360 " - lifting capacity: 2000mm - 2560kg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Transport dimensions 12.5x2.4x2.4m weight 12000 kg

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Dodpfx Asygn Ibec Njkh Availability: by arrangement Location: Bavaria

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Dodpsw S Eylefx Ac Nekh

Condition: new, Dimensions: W2500 / L5250 / H- 2100 Dkedpju E Ezpofx Ac Noh

Condition: like new (used), LINCK SE flat separator with extraction unit type SE+AVS. Very good condition after complete refurbishment! Length 7.0 m. Sale upon customer request. Dkodpsyhzu Uofx Ac Neh

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Dedporvh Tmofx Ac Njkh Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: refurbished (used), Trimming recutting machine MEM Cobra Cutting height 120 mm Diameter 1070 mm 4 axes variable 2 x 55 KW Dkedpsu Ni Iujfx Ac Noh Refurbished machine. Optionally we can offer new sprinkle separator as in photo.

Condition: excellent (used), Debarking machine Rennepont type Rotor Master 900. Rennepont 900 debarking machine, fully functional with rotor centering. Minimum diameter 12 cm, maximum diameter 90 cm. Maximum feed rate 35 m/min. Machine includes motors. The machine is hydraulically shifted when the log is larger than 900 mm. Supporting frame included. Sale upon customer order. Dodpfeyhzuuox Ac Njkh

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Model Woody 500-100-1.0 SP Dkodpfsvrd Uqsx Ac Noh Produced in 2019. Like new.

Condition: excellent (used), Year of construction: 2001, Mayer FH2-3520 Veneer Saw, precision cutting saw with jointing unit (planing unit) and veneer alignment table Robust machine construction by Mayer A video of the machine in operation can be sent on request. For tear-free, perfectly joined cutting of veneer, including thick-cut veneer Maximum cutting length: 3500 mm Saw and jointing units are combined in one assembly, so only one unit needs to be moved. Easy-to-operate saw unit running on linear guides. Rear outfeed table with through-finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Dedpfx Acjx Hqtzs Nskh Pneumatic workpiece clamping Saw drive motor 1.8 kW, jointing unit (milling unit) motor 1.2 kW Motors can be conveniently switched on at the handle and operate only when needed. Fine-cut blade with carbide tips, sharpened Planer head Z4, equipped with new carbide indexable inserts, including spare knives Practical front veneer shelf, extendable for the planing unit Extraction port 100 mm with extraction duct CE marking Operating manual Standard tool kit Original paint, only minor touch-ups Dimensions approx. 5050 x 1700 x 1400 mm (L x W x H). Weight approx. 900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see ‘more offers from this seller.’

Year of construction: 2016, condition: excellent (used), functionality: fully functional, High-performance stacking machine by TC Maschinenbau Consisting of: separator, aligning roller conveyor, layer forming unit, gripping unit, transport forks, lifting platform, slat magazines. The system is dismantled, overhauled, and partially reassembled for inspection in our workshop. Lengths: 2.5 to 5.0 m. Dedoxnyt Rjpfx Ac Nokh

Year of construction: 2022, condition: new, New WRC, performance by black series Combination of high -tech equipment with frequency contolled motors and movements. Main motor 30 kW or 37 kW or 45 kW Soft start & stop starting Boards pushing hand with adjustable hight & additional side holders Pressurized blade guidances with oil mist cooling Automatical oil and grease lubricating Tracking precutter Robust and raised rails with automatical waste cleaners All possible equipment for manipulating with log; movable logturners, patented fast log & prism turners, 2 levels of log grippers Separated self standing control panel with seat and 2 joystick controling. Djdpfxsfm Urte Ac Nokh Price & Conditions

Condition: new, Year of construction: 2025, ARE YOU INVOLVED IN CUTTING THICK LOGS AND ARE YOU LOOKING FOR A POWERFUL BAND SAW THAT WILL CUT YOUR THICK LOG WITHOUT PROBLEMS? THEN WE HAVE A SOLUTION FOR YOU, THE HORIZONTAL BAND SAW WRC 1550! ✔️ROBUST CONSTRUCTION THAT ENABLES SAW STABILITY ✔️MAIN MOTOR 55-110kW ✔️IDEAL RATIO BETWEEN THE DIAMETER OF THE MAIN WHEELS, THE WIDTH OF THE MAIN WHEELS, THE LENGTH, WIDTH AND THICKNESS OF THE BAND SHEET, WHICH ENABLES ACCURATE, FAST CUTTING ✔️DOUBLE-SIDED BEARING WHEELS THAT ENABLE STABILITY OF THE MACHINE EVEN IN THE LONG TERM! ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW HEAD ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW LINE (INCLUDING HYDRAULIC DOUBLE TURNERS DESIGNED SPECIFICALLY FOR TURNING THICK HEAVY LOGS) Dkodpfxjv R Umue Ac Noh 👉 For more information and inquiries, contact us!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, 3-box conveyor; three-part automatic stacked boxes. Board height: 17-27 mm Board length: 800-1200 mm Dsdpfowf Digjx Ac Nekh Board width: 80-160 mm Stacking up to 60 pcs/min

Condition: new, functionality: fully functional, power: 132.39 kW (180.00 HP), fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x4, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, additional headlights, air conditioning, airbag, all wheel drive, central locking, differential lock, electronic stability program (ESP), fog lights, immobilizer system, parking heater, Are you looking for a reliable and affordable emergency vehicle? Then you've come to the right place! From our immediately available stock of new vehicles, we offer: Ambulance RTW based on MAN TGE 3.180 All-Wheel Drive 4x4 Emergency Patient Transport Vehicle (N-KTW) The solution for rough terrain and wintry conditions: our compact, all-wheel-drive ambulance with a permissible total weight of only 3,500 kg, allowing it to be driven with a standard car driver's license. Chassis: • New MAN TGE 3.180 all-wheel drive 4x4 with automatic transmission • Single tires aligned with track width for maximum off-road capability Base Vehicle: • Driver’s cab with 2 seats and lockable center console • Sealed, glazed partition wall to patient compartment • Intercom system between driver’s cab and patient compartment • Map reading lamp • Air conditioning and auxiliary heater Patient Compartment: • Reinforced, corrosion-protected wall, ceiling, and floor construction Dodpsxdlppefx Ac Nskh • Thermally insulated walls and ceiling, climate control for patient area • Touch panel for climate and lighting controls • All surfaces are smooth and easy to clean • Adjustable stretcher support with roll-in stretcher • Central oxygen supply pre-installed with 2 ZGA sockets • Holders for 2 oxygen cylinders (up to 20 l) and spineboard • 2 wall rails for medical equipment (syringe pumps, infusion pumps, etc.) • Four 12V and four 230V sockets • Multiple storage compartments, some lockable • Color-coded storage system in head area • Mounting for up to 3 emergency containers next to left exit • Cabinet system with waste bin and washbasin • 1 attendant seat at the head end • 1 swiveling seat on the right side Safety and Lighting: • LED lightbar on roof, freely selectable colors (e.g. blue, red, green) • 2 LED front flashers and 2 angled side flashers, colors freely selectable • Rearview camera • Work lights for right-hand side and rear area We would be happy to provide you with a detailed quote and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but is for informational purposes only. Subject to prior sale!

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Dkodexgbwzjpfx Ac Neh Ex-works: - available immediately -

Condition: used, Year of construction: 1996, The equipment detailed here is a Paper Jogger of the type RLE-3-K, manufactured by Knorr in the year 1996. It has a serial number of 6667004 and dimensions of 750 x 850 mm. This unit is currently in stock and located in Germany. The Paper Jogger is designed to handle a maximum format size of 750 x 850 mm with a stack height of 150 mm, and it weighs 300 kg. It requires a power supply of 400 V for operation. Key features of this machine include an air table, the capability to jog to the right or left, an adjustable tilt angle, and adjustable jogging force. These specifications make it a versatile tool for paper handling and alignment tasks. Format: 750 x 850 mm Equipment: Max format: 750 x 850 mm Dkodpfx Acewxm Ras Noh Stack height: 150 mm Weight: 300 kg Power supply: 400 V Air table Possibility of jogging to the right/left Adjustable tilt angle Adjustable jogging force

Condition: excellent (used), Year of construction: 2014, Straight-line, crash-lock, double-wall, 4-corner and 6-corner boxes. Condition: Perfect! Max. speed: up to 300 m/min; inching speed: 20 m/min Material thickness: up to 1200 g/m² for solid board and corrugated cardboard (E, C, B, AB flute – 3 or 5 layers), max. ~8 mm before folding, ~20 mm after folding Max. thickness of folded box: ~20 mm Modular construction & drives Each section independently driven by servo motor ("SmartServo system") Motorized linear guides for precise carrier transport and positioning Memory Job recall function for fast changeover between repeat jobs Machine sections – main functions: 1. Feeder Section – Friction feeder with adjustable vibrator, side gates, servo-driven, belts with suction feature, touchscreen panel, rear support for long blanks 2. Side Register Section – Aligns blanks to one side for perfect parallel feed; rapid setup; servo motor 3. Pre-folding Section (optional on AC/PC/SL models) – Pre-folder up to 180° (flap), pre-folder up to 135° (third crease), crease openers 4. Crash Lock Bottom Section – Hook and helix set for folding front flaps, adjustable hook tension, B-lock configuration, fast adjustment 5. Gluing Unit – One lower (left) and option for lower right glue tank; optional upper cold-glue system; easy removal and cleaning 6. Folding & Closing Section – Servo-driven outer belts (up to 180°), three full carriers (upper/lower), mini-box folder, service access 7. Trombone / Transfer Section – Independent drive, automatic belt tensioning, pneumatic squaring devices, box transfer system to press section 8. Press Section – Pneumatic/servo press section, manual/auto modes, length approx. 6.5 m (effective ~4 m), pressure adjustment, front squaring device 9. Back-folding Device (only in SL models) – Electronic, asynchronous system with two independent servo motors, easy setup for 4- & 6-corner boxes 10. Optional Scoring / Creasing Module – Servo-driven creasing section, placed before pre-folding, enables deeper scores Technical specifications 1450 SL: Machine length: from approx. 22.4 m (PC/SL) Width: approx. 2.23 m; Height: approx. 1.5 m Net weight: 15 tons Motor power: 40–45 kW; air supply (6 bar), consumption approx. 30 m³/h, glue tank ~155 L 🤝 Megafold Advantages Dkjdpfew H Nw Ejx Ac Nsh • Material versatility: from thin solid board to heavy corrugated and multi-wall • Wide range of box styles: straight-line, crash-lock, double-wall, 4-corner, 6-corner • Modular and configurable design allows adaptation to specific production needs • Advanced automation and precision: servo drives, memory settings, operator radio-controller, touch HMI • Easy maintenance and cleaning due to modular components and operational access

Condition: used, Year of construction: 2022, functionality: fully functional, turning length: 1,280 mm, turning diameter over cross slide: 255 mm, type of input current: three-phase, bar passage: 81 mm, total height: 2,200 mm, total length: 5,400 mm, chuck outer diameter: 210 mm, total width: 1,800 mm, overall weight: 7,850 kg, Equipment: documentation/manual, We are offering this used Doosan PUMA 2600 LSY II CNC turning and milling center, year of manufacture 2022. Model: PUMA2600LSYII Serial number: ML0378-000106 Power supply: AC 380 V, 3~, PE, 50/60 Hz Rated power: 57.08 kVA Interrupting capacity: 5 kA Full load current: 86.73 A Short-circuit capacity: 10 kA Wiring diagram output: P21SYH31UE04 Weight: 7850 kg Date of manufacture: 2022.03 6-AXIS CNC – HORIZONTAL – HIGH-PERFORMANCE TURNING CENTER with LIVE TOOLS, Y-AXIS, and SUB-SPINDLE Commissioning: 02/2023 Low hours, operated on single-shift basis only The machine can be demonstrated under power at our premises. Affordable shipping can be arranged. Technical details and scope of delivery: • CNC control FANUC 0-iTF+ with Manual Guide i, 15” touch screen • MONOBLOCK machine bed, cast construction (Meehanite cast iron) 30° slant bed in tubular design • Main and sub-spindle as built-in spindle units • Main spindle with 5 bearings (3x angular contact ball bearings + 1x double-row cylindrical roller bearing) spindle bearings, precision class P4, lifetime lubrication • Three-jaw power chuck for main spindle Ø 255 mm and sub-spindle Ø 175 mm including 1 set of soft top jaws • Through-hole clamping unit, hydraulically actuated with hollow clamping cylinder, complete with safety device, coolant catch tray, stroke control, and draw tube • 12-position tool turret with BMT 65 P mountings and directional logic • Maximum turning length 1280 mm • Bar feeder interface • Electronic safety coupling for X and Z axes • Automatic central lubrication • Oil separator • 3-color warning light beacon • Hardened flatbed guideways, counter-side coated with Rulon 142 • Z-axis way cover • Full enclosure • Waterproof work area lighting • 1 set of auxiliary tools • Alignment bolts and mounting pads • Coolant system with 7-bar delivery pressure • Absolute position measuring system on all axes • Spindle motor AP2/10000_7.5/1.5kW • Bar capacity Ø 81 mm • 3-jaw chuck Ø 210 mm (main spindle right) • Hard jaws • Internal coolant supply through the sub-spindle • Workpiece ejector • Parts catcher with conveyor belt for the sub-spindle • Automatic tool measurement arm, electrically swiveling • Coolant pump, delivery pressure 14.5 bar, 30L/min • LNS scraper-type chip conveyor MH500, right side • Oil mist extraction system • 1.5 m bar loader adapted and fully functional on the machine External dimensions / footprint: Length 5400 x Depth 1800 x Height 2200 mm (with chip conveyor) Djdpsyhp Hzofx Ac Njkh With extraction system, height is 2800 mm Further optional used accessories available from us: Tool holders, live tool holders, collet chucks right and left with collets 185E from Ø 1-60 mm, adapters for Hainbuch mandrel clamping system If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 1982, condition: good (used), pre-cutting saw Esterer KSG-F year 1982 Dkodpsip T Dlsfx Ac Njh travelling with swords with control with length measuring with frame with hydraulics immediately available Location: Austria, near Vienna

Condition: excellent (used), Baljer&Zembrod track system 80 m, 14 units Dkodpfx Aceyhphfe Noh

Condition: used, Chip screen Year of manufacture: 1996 Manufacturer: Konewood/Andritz Model: CS600 Dkjdpfx Asyhn Dxsc Nsh Screen capacity: 400-675 m3/h Weight around: 10 tons

Condition: not inspected (used), Multiple cross-cut saw Manufacturer: Bäurle Machine comes from a sawmill 3 saws, each with 3 kW, traversable over 6 meters length Saw blade diameter approx. 450 mm Width adjustment via handwheel Transport via chain conveyor with pushers Distance between pushers approx. 1 m Infinitely variable speed control Dkodpfxsyhl A Ee Ac Noh Safety emergency stop wire retrofitted

Condition: used, Year of construction: 1999, For the production of writing pads with cover sheet Width: min. 105 mm, max. 330 mm Length: min. 148 mm, max. 355 mm Block thickness: min. 3 mm Block thickness: max. 15 mm Manufacturing process: The unglued blocks cut to size are manually laid onto the feed station in by hand. Dsdpfxoyf I Sks Ac Nokh The further process follows automatically. The blocks are aligned and pushed into a magazine drum. These are then glued to the head side with hot glue and dried. Subsequently, the blocks are fed further and the envelope is grooved, supplied, glued and struck around the block. Finally, the finished blocks are laid out on a table.