Used Saw Drill Attachment for sale (15,310)

Year of construction: 2005, condition: used, Applicable material: Metal Cedpfxsxt N Ubs Acyshd Auction item. Unit is in working condition.

Condition: good (used), Year of construction: 2008, Machine Data Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Roller rail (double-track elements): 9 units Clamping grippers: 7 units, first 3 are double-finger type Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Codpfx Aswktiajcyshd Automatic cutting height adjustment Angle alignment device; min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Grooving program, cut-out and stress-relief cut program Labeling with part graphics / label program / label printer PICA 104 Laser alignment light Data interface for storage systems and optimization program: Schnitt-Profit Professional

Condition: used, Year of construction: 2008, operating hours: 3,438 h, cutting length (max.): 4,200 mm, cutting width (max.): 4,200 mm, Panel Dividing Saw Panhans S45, Year 2008 Read Operating Hours (Main Saw): 3,438 h Max. Cutting Length: 4,200 mm Max. Cutting Width: 4,200 mm Saw Unit Swivel Range: 0 – 45° Angle Cuts: ±45 degrees Angular Accuracy: ±0.01 mm Mitre Cuts Mitre Angles up to 46° Saw Blade Projection: 72 mm with blade vertical at 0° Saw Blade Projection: 50 mm with blade vertical at 45° Max. Stack Height: 60 mm Main Saw Blade: 350 x 4.4 x 30 mm Scoring Saw Blade: 180 x 4.55/3.5 x 30 mm Main Saw Motor: 14 kW Scoring Saw Motor: 1.5 kW Saw Unit Feed Motor: 1 kW Saw Unit Feed Rate: 0–80 m/min, stepless Saw Unit Return Speed: 100 m/min Cross Fence (Material Pusher): 1.1 kW Cross Fence Feed Rate: 0–25 m/min, stepless Cross Fence Return Speed: 120 m/min Scrap Cutting Facility Brush-sealed notches in the pressure beam for complete panel separation. Clamping Grippers: 8 pieces Gripper Spacing: 65/245/395/985/1605/2845 mm Fully Automatic Side Pressure Device, stepless 50–100 mm Sensor Cutting: Optical Device for Automatic Workpiece Measurement with variable trimming cut 3 Air Cushion Tables 600×1800 mm Chodpjw N D S Isfx Acysd Air Supply by Blower: 2.2 kW Operating System: WIN EX Embedded Screen Control: VGA Monitor 17"/19" Control Functions Processing Mode: Production Manual Processing Mode: Production Order Processing Mode: Production Optimization PIOS PRO Processing Mode: Production Manual All necessary programs and machine functions for processing can be entered directly in a clear menu in this mode. Processing Options Single Cut, Series Cutting, Sensor Cut, Groove, Insert Grooves, Front Rabbet, Rear Rabbet, Formatting, Cutouts, Notches Processing Mode: Production Order In this mode, cutting plans, panel cutting plans, block cutting plans, and angle cutting plans created via the PIOS PRO optimization can be processed. Groove Program Convenient production of grooves, rabbets, and insert grooves in single and series cuts using: 2 presettable groove cutting depths Formatting Device End trimming stops mounted directly on the clamping grippers for sizing of panels with overhanging surface layers. Cutout Device For making precise glass cutouts (e.g. doors), notches (e.g. ventilation slots), and for insert grooves. Cutting Height Adjustment Electro-pneumatic, stepless Positioning Accuracy of Cutting Height: ±1 mm Label Printer Operating Pressure: 6 bar Operating Voltage: 400 Volt, 50 Hz Rated Power: 20 kW Weight: approx. 4,000 kg Dimensions (L x W x H): approx. 6,500 x 7,500 mm (Subject to changes and errors in the technical data. Prior sale reserved.)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6610231000922, Fully functional CNC drilling machine (like new). Chodpfx Acsxt Na Rjyjd

Condition: good (used), functionality: fully functional, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, total height: 1,850 mm, total width: 940 mm, This Bimak Mod. 35 MT/C is a well-maintained column drilling machine equipped with a cross table and features a Mitutoyo digital readout on two axes. The machine supports both clockwise and counterclockwise rotation, which can be easily switched using a foot pedal for efficient operation. The Laip quick-change system includes ten tool holders, consisting of two drill chucks and seven collet holders, providing flexibility for various drilling and tapping tasks. An additional collet holder is required for milling operations with this machine. This holder is not included but can still be ordered as new. Manufacturer: Bimak Model: Mod. 35 mt/c Condition: Used Mains voltage: 400V Drive: V-belt Spindle taper: MC4 Spindle stroke: 150 mm Automatic spindle feed: No Speed ranges: 14 (45 - 1650 rpm) Digital readout: Mitutoyo Coolant pump: Yes Reversible (CW/CCW): Yes Cross table dimensions: 600 x 240 mm Machine dimensions: 940 x 1100 x 1850 mm (Width x Depth x Height) Cedoxt Ivkopfx Acyjhd Motor: 0.8 / 1.5 kW See website for a video of the machine in operation.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3711, cutting length (max.): 4,000 mm, cutting height (max.): 2,000 mm, saw blade diameter: 250 mm, Vertical band saw DPM ED 2141 Year of manufacture 2015 Cutting unit Digital display 250 mm cutting disc Pneumatic locking system Plate feed system with metal rollers Cedpfexbdlkjx Acyjhd Engine power 4 KW Engine speed 2905 rpm Vertical height zontala2100 mm Horizontal cutting length 4110 mm Cutting thickness 50 mm Cutting disc 250x80x30x3.2 mm Rib 125x3.1/2.2x20 Z24 Overall dimensions (LxHxP) 5500x3000x2000 mm

Year of construction: 2018, condition: used, Empty weight: 2.400 kg Auction item. Unit is in working condition. Codpfxoxt N Tkj Acyshd Sawing machine sold as seen in photos.

Condition: good (used), Year of construction: 2009, Used horizontal panel dividing saw Manufacturer: Holzma Model: Profi HPP 380/43/43/Plastic Year of manufacture: 2009 Plastic configuration Includes the following components: + Special gearbox for saw carriage (0.1–150 m/min) + Frequency control for 21.0 kW motor + Spray unit for main saw (minimum quantity lubrication) + Special 2-finger narrow part gripper + Optimized extraction in saw carriage and pressure beam + Cleaning bar in the chip channel + Adjustable light sensor for saw carriage with integrated air jet device + Pressure boost for air cushion table blower. Stepless adjustment via rotary control. Cutting length: 4300 mm Cutting width: 4300 mm Saw blade projection: 95 mm Saw carriage feed rate: 0.1–150 m/min Automatic pressure beam height control Automatic cutting height adjustment Adjustable pressure beam contact pressure Adjustable gripper (clamp) contact pressure Gripper (clamp) release Machine table (saw body) fully equipped with air nozzles Angle alignment device Main saw motor (frequency controlled): 21 kW Scoring saw motor: 2.2 kW Cedpfx Acexc E Txoyohd Combi profile rail (double-track elements): 9 pcs Grippers (2-finger): 7 pcs Optional equipment Additional combi profile rails: 5 pcs Rollers, rubber-coated for sensitive materials 9 kerf closer bars (4300 mm) Narrow part grippers: 2 pcs Floating-mounted grippers: 8 pcs Labelling package includes Labeling with part graphics Labeling software Label printer Pica 108 Optimization software Material-dependent parameters Data transmission online & via USB port Synchronous cutting Multiple cutting Automatic pressure adjustment

Condition: good (used), Year of construction: 2011, functionality: fully functional, Cutting length 4300 mm Codpfxjxt H Tno Acyshd Cutting height horizontal 2110 mm Cutting height vertical 2200 mm Scoring unit Free-standing supports

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Cedpfx Aow Sy T Hecyshd

Condition: good (used), Spiral Drill Bit Grinding Machine DAREX SP 2500 - Grinding diameter: 1.5–26 mm - 3x tool holders - 1x spare grinding wheel Codpfxswqzy Ts Acyshd - Machine base - Documentation Dimensions: LxWxH: 0.5x0.5x1.6 meters / Weight: 80 kg Subject to errors and input mistakes

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Cedpfxeurkype Acyjhd Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Year of construction: 2019, condition: used, Applicable material: Metal Empty weight: 3.500 kg Auction item. Unit is in working condition. Codpfx Aext N S Hscyjhd Sawing machine sold as seen in photos.

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm Codpoxrg E Isfx Acyshd cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.

Condition: good (used), A used high-speed radial drilling machine Fab.DONAU Type: DR 32 with vice. The machine operates in all directions. The clamping to the right and left is weak. Therefore, we are selling the machine at a favorable price. Chjdpfxjwn Ex Ue Acyod

Condition: used, Year of construction: 1984, Roller diameter: 600 mm Chsdpew Sy Hgjfx Acysd Speed: 750 rpm Maximum cutting height: 470 mm Maximum cutting width: 580 mm Maximum blade length: 4600 mm Maximum blade size: 30 x 5/10 mm Table size: 550 x 835 mm Table height: 850 mm Motor: 3 HP (2.2 kW) Weight: 320 kg Storage location: Supplier

Condition: used, No. 3248 Horizontal panel saw HOLZMA Optimat HPP 380/38/38 Used Cutting length 3800 mm Cutting width 3700 mm Saw blade projection 95 mm Main saw motor 13.5 kW Scoring saw motor 2.2 kW Main saw blade 380 x 4.8 x 60 mm Scoring saw blade 180 x 4.8 - 5.8 x 45 mm 7 clamps 3 air cushion tables, of which 1 with angle stop 3 roller elements on front side LKT Operating software Schnitt Profi(t) 9.0 15" monitor (replaced in January 2025) V program pusher up to 80 m/min V saw carriage up to 130 m/min Machine dimensions 7205 x 6100 mm LW Sale on behalf of customer, ex location near 90471 Nuremberg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Images and videos serve as examples and do not represent the actual scope of delivery Chedpfx Asxrglnecyjd Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: good (used), Year of construction: 2022, Code: 0232 Brand: SCM Model: MINIMAX SC 4/E - CE Standard Panel saw with tilting blade and scoring unit for precise cutting of panels, furniture, custom-made furnishings, window frames , wooden doors, joinery, plastics, composite materials and various other items - CE Standard - Year 2022 Chsdpsxrgc Tjfx Acysd Technical data: Saw unit consisting of a powerful closed-ring cast iron structure Blade inclination 0-45° Max blade diameter with mounted scoring unit mm 315 - F 30 Max blade projection from the table at 90° mm 100 Max blade projection from the table at 45° mm 70 Aluminium carriage length mm 2600 Scoring unit blade diameter mm 100 F 20 Blade rotation speed 3800 rpm Blade motor power Kw 4 Scoring unit motor power Kw 0,5 Cutting width with parallel guide mm 900 Saw guide unit with micrometric rack adjustment Squaring frame complete with front roller Telescopic squaring ruler with 2 reversible stops Suction port diameter mm 120 Suction port diameter on protective hood mm 60 Overall dimensions of assembled machine mm 3000 x 3100 x 1000 h Overall dimensions for transport mm 3000 x 1500 x 1200 h Weight kg 530

Year of construction: 2017, condition: used, Type of fuel: Electric Chedpjxt N Stofx Acyed Applicable material: Metal Empty weight: 150 kg Auction item. Unit is in working condition. Sawing machine sold as seen in photos.

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Cedst Ht Hhspfx Acyjhd Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Year of construction: 2018, condition: used, Type of fuel: Electric Applicable material: Metal Empty weight: 996 kg Chsdpjxt N Smsfx Acyed Auction item. Unit is in working condition. Sawing machine sold as seen in photos.

Condition: excellent (used), CATALOG NUMBER 7652 Technical specifications: - Track width: 350mm - Cutting width: 370mm - Blade diameter: 400 to 450mm - Cutting height for 350/400mm blade: 160mm - Spindle diameter: 70mm - Table dimensions: 1850x800mm - Height from base to table: 750mm Top section: - Pawls/deflectors - 2 smooth, metal sliding shafts - Shaft with saw blades - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls/deflectors - Track - Toothed, extracting drive shaft - Electric body height adjustment - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 2.2kW Chodpfjwmfqhex Acysd - Main motor: 55kW - Extraction nozzle diameter: 200mm - Overall dimensions (L/W/H): 2560x1700x1900mm - Weight: 2700kg ADVANTAGES – Made in Germany – Technical documentation (DTR) – Used multi-blade saw – Very good condition Net price: 39,900 PLN Net price: 9,500 EUR depending on an exchange rate of 4.2 EUR (Prices may vary with major currency fluctuations)

Condition: excellent (used), Catalogue number 7698 TECHNICAL DATA - Track width: 300mm - Working width of shaft: 370mm - Max blade diameter: 300mm - Blade bore diameter: 70mm - Max cutting height: 120mm - Table width with extension: 750mm - Table length with extension: 1530mm * From above: - Pawls/kickers - Metal pressure idler roller - Metal pressure roller - Shaft with saws - 2 smooth metal idler rollers, pressure * From below: - Guide bar - Pawls/kickers - Track - Central lubrication of track - Stepless feed speed adjustment - Main motor: 15.5kW Cedpfxowya Nfo Acyohd - Extraction port diameter: 150mm - Overall dimensions (LxWxH): 1600x1600x1600mm - Weight: 1550kg – Italian-made – Very good condition – Used multi-blade saw Net price: 33,900 PLN Net price: 8,070 EUR (exchange rate: 4.2 EUR) (Prices may vary with greater exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA - Track width: 250 mm - Roller width: 400 mm - Max. blade diameter: 400 mm - Blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2120 mm *From above: - Pawls - Pressure roller, smooth - Pawls - Pressure roller, smooth - Saw shaft - Smooth pressure rollers, 2 pcs. From below: - Guide - Sliding shaft, smooth - Pawls - Track - Central lubrication - 2 lasers - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric lifting of the frame: 0.75 kW - Electric lifting of the saw shaft: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200x1850x2100 mm - Weight approx.: 3000 kg ADVANTAGES – German manufacture Chsdpfx Asug Ugujcyjd – Laser – Electric lifting of the frame and shaft – Infinitely variable feed speed adjustment – Used multi-blade saw, in very good condition Net price: 109,900 PLN Net price: 26,160 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant rate fluctuations)

Condition: excellent (used), Multiple-shaft circular saw (gang saw) by FOD BYDGOSZCZ* DPPA III 50E 620/120 Catalogue Number: 7407 Cjdpourkdzjfx Acyehd TECHNICAL SPECIFICATIONS: - Maximum cutting height: 120 mm - Maximum workpiece width: 700 mm - Working width of the shaft with saw blades: 620 mm - Maximum saw blade diameter: 450 mm - Saw blade bore diameter: 90 mm Upper side: - Kickback pawls - 2 toothed driven rollers Lower side: - Kickback pawls - 2 smooth driven rollers - Saw blade shaft - Smooth driven roller - 2 feed speed options - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2370x1400x1800 mm - Weight: approx. 3000 kg – Polish production – Used machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (based on an exchange rate of 4.2 EUR) (Prices may change depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer for the manufacturer. All trademarks and names are used purely for informational purposes to identify the product. We only resell goods that have previously been placed on the market by the manufacturer. We have no business association with the manufacturer.