Used Rubber Feed Rollers for sale (21,046)

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the segments total load capacity 1,200 tons maximum steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 load capacity 15,000 kg per roller Hodpfx Agot Run Ietent roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Hjdpou Rim Hofx Agtjnt Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm Hnodpfx Agsztzcwstot - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: used, Technical specifications: Max. planing width: 240 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle arrangement: bottom: 5.5 kW Hodsycu R Ijpfx Agtjnt right/left: 7.5 kW top: 5.5 kW top: 5.5 kW bottom: 5.5 kW universal: 5.5 kW Spindles 1/4/5/6 are on separate motors Spindles 2/3 are on one motor Grooved tables Grooved rollers in the table: 2 Top steel feed rollers: 5 Top rubber feed rollers: 3 Dust extraction port diameter: 6 x 140 mm Infinitely variable feed rate adjustment Feed via cardan shafts Table lubrication pump 2 smooth rollers in the table Pressure: 6 atm. Electric lifting of the machine body Power supply: 400 V Total power: 46 kW Overall dimensions: Length: 4600 mm Width: 2000 mm Height: 1800 mm

Condition: used, Year of construction: 2002, Working width: 510 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: digital display Feed speed: continuously variable Infeed roller: rubber Outfeed roller: rubber Table rollers: no Motor power: 5.5 kW Dust extraction port: 160 mm Hedpfx Agezhm Distent Machine length: 1200 mm Machine width: 1200 mm Weight: 900 kg

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Demo/exhibition machine from showroom The sorter has the following key specifications and performance data: Year of manufacture: 2021 Number of sortable sizes: 3 Sorting width: 800 mm Suitable for: carrots, beetroot, potatoes Thickness settings: variably adjustable from 6 to 69 mm Throughput: approx. 4-7 t/h Hnodew Rn N Hspfx Agtet Scope of delivery: - used Allround roller sorter in as-new condition - discharge belts: 2 pcs. 2,000mm x 600mm, 1 pc. 2,000mm x 400mm - transfer belt/elevator 4,750mm x 600mm with hopper - feed belt - control cabinet with controls

Condition: used, Year of construction: 1976, Working width 1350 mm Number of sanding units x st. Second-hand machine Year of manufacture: 1976 Features and technical specifications: - grinding from below - Material feed via rubber rollers - Non-contact control of oscillation - Quick-change pressure bar - Electric motor-driven adjustment of tool thickness with an easy-to-read display Digital display - Push-button control with contactor control - Sanding width 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width 1360 mm - Sanding belt length 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Hnedozk Nyrepfx Agtjt Dimensions W x D x H 1800 x 1100 x 1520 mm Weight: 2,600 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), Technical specifications: Number of heads: 4 Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom right left top Second and third spindle powered by one motor Toothed roller on table before the first head Number of steel feed rollers: 5 Number of rubber outfeed rollers: 1 Number of feed rollers in table: 1 Number of smooth rollers in table: 1 Extraction port diameter: Variable feed speed Feed on cardan shafts Lubrication pump for worktable 2 smooth rollers in table Pressure: 6 atm. Electric body lifting Power supply: 400 V Total power: 28 kW Overall dimensions: Length: 4100 mm Hnsdpfx Agsxbqcistot Width: 1880 mm Height: 1850 mm

Condition: used, Year of construction: 1989, with positioning control and Tersa cutterblockcleaned, function tested, test run- machine lubricated- test run- infeed rollers renewed- outfeed rollers renewed- rubber lip front and rear renewed- test planingspare parts:Panhans feed rollers, overhauled controlused, good conditionmake Panhanstype 435year of construction 1989Masch.-Nr. 170GS-testedmotor 5,5 kW / 0,25 kWplaning width approx. 510 mmplaning height approx. 250 mmlink pressure beamrubber infeed rollerrubber outfeed rollerfeed 7/14 m/ber of knives 4 piecesknife systemTersa reversible kniveselectric height adjustmentautomatic positioning controlsound insulationexhaust connection D 160 mmspace requirement approx. 1100 mm x 1200 mm x 1200 mmweight approx. 950 kgtotal connected load approx. 5,75 kWstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Hnjdpjvwfbijfx Agtst

Condition: good (used), Year of construction: 1996, operating hours: 5,500 h, Wide belt sanding machine with a 1100 mm sanding width. 1st unit: Rubber-coated roller 2nd unit: Electronic oscillating shoe, 3-stage motor with selectable left and right rotation 3rd unit: Electronic oscillating shoe with stepless belt speed adjustment 4th unit: Air blast nozzle Hnodpoghymhefx Agtot Feed rate: 2 stages Vacuum table

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Hnjdpfey Na Hvox Agtot Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of workpiece: 200mm - max. height of workpiece: 150mm - number of spindles: 4: 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 150mm, 4kW 3) vertical left: 150mm, 4kW 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm From above: - 6 infeed rollers, toothed, including 2 double rollers - 1 outfeed roller, toothed, rubber From below: - 1 infeed roller, toothed, pulling, swiveling in the lower table - 3 side pressure rollers - 1 outfeed roller, pulling, metal, smooth - all rollers are pneumatically pressed - length of infeed table: 2130mm - table adjustable up/down Hnodpfxezu R N Ns Agtot - central lubrication - electric setting of planing thickness - lifting motor: 1.1kW - stepless feed speed adjustment on inverter - feed motor: 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3550x1750x1800mm - weight: approx. 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Net price: 11880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (prices may change in case of significant exchange rate fluctuations)

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Hnjdpfx Ajy Dhudegtst

Condition: used, Year of construction: 1997, used good condition low mileage cleaned functionally tested partially refurbished completely adjusted Includes 1 sanding unit Combination unit with electronic shoe Dust brush Manufacturer: Bütfering Type: ECO e1100 Year of manufacture: 1997 Machine no.: 34546 Working width approx. mm: 1100 Passage height approx. mm: 150 Hnjdjzkvy Espfx Agtjt CE type-tested Number of units: 1 Belt dimensions l x w mm: 1120 x 1900 Feed speed m/min: 4 + 8 Calibrating roller Grooved Rubberized Combination unit kW: 11 Electronic segmented shoe Dust extraction connection mm: 180 + 140 Space requirement approx. L x W x H mm: 1700 x 1700 x 2000 Weight approx. kg: 1500 Location: 97447 Gerolzhofen, free loading, unpacked Handover in as-is condition, as inspected, without warranty and guarantee

Year of construction: 2005, condition: used, Roller transport Finnrose 3.000 mm Hnsdpfxjzf N Nps Agtst - Producer Aagaard Finnrose - Year of construction 2005 - Working width 1.300 mm - Overall width 1.380 mm - roller conveyor height 800 mm - Diameter roller 65 mm - Roller pitch 110 mm - all rollers with rubber surface - FU-Regelung für Feed speed - Angetrieben - Length 3.000 mm - Colour 7035 - Motor power 0,37 kW - Voltage / HZ 400 / 50 - Location, in stock

Condition: excellent (used), Catalog number 6765 Hjdeztzmcepfx Agtsnt TECHNICAL DATA - max width of workpiece 230mm - max height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable left/right from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm from above: - infeed rollers, toothed, 6 pcs, including 2 double rollers - outfeed rollers, rubber, 2 pcs from below: - infeed roller, toothed, metal, twisted in the lower bed + - outfeed roller, metal, smooth - rollers pneumatically adjustable - length of infeed bed (with pneumatic feeder) 3390mm - possibility of operation without engaging the pneumatic feeder, - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - smooth adjustment of feed speed - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions L/W/H 7000x1950x1700mm, - weight approximately 3000kg - for wet and dry wood - pneumatic feeder on the infeed table, - planer used, very good condition Net price: 65900 PLN Net price: 15690 EUR Net price calculated based on the exchange rate of 4.2 PLN/EUR (price may change in case of larger exchange rate fluctuations)

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel Hnjdpfxsugpwns Agtet maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Holz Her Sprint 1327 / PPC 231 Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm) 15" touchscreen control Power-PC color display Motorized, position-controlled bridge height adjustment Infeed guide rail with extended roller conveyor for precise workpiece feeding Pre-milling unit for edge preparation before the gluing station Fully automatic edge magazine for roll and strip material – SYNCHRO Gluing unit GLU-JET cartridge granule + PU adhesive, thin-film technology High-gloss package Glue height adjustment / sensor nozzle Printing unit MOT Hnjdpfez Az H Rsx Agtet Cutting unit for roll and strip material with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit - Multifunction, 4 NC servo axes for edge trimming, radius, and chamfer milling 0.4 - 8 mm (15 mm) Scraping unit for chamfers and radii MOT, 2 NC axes pneumatic infeed and outfeed Copy milling unit for rounding corners and long edges, also for postforming, working height 60 mm Surface scraping unit - finish, pneumatic Buffing unit for final polishing and edge polishing with 2 textile discs HIGH-END spraying equipment Infeed area, electrically controlled release agent spray device Printing unit, antistatic spray device Outfeed area, electrically controlled cleaning agent spray device Complete tool set From leasing return / year of manufacture 2015 Machine is WORKSHOP OVERHAULED and in TOP CONDITION Available from stock in Lieboch

Condition: excellent (used), SCM Sandya 5 Hnodpfxszv Tvue Agtjt - sanding width: 110 cm - 2 belt speeds - stepless feed speed adjustment - adjustable pressure shoe - one 11 kW motor drives 2 sanding heads - the first head calibrates the steel roller, the second head calibrates the rubber roller and the pressure shoe - oscillation controlled by a photoelectric cell, low compressed air consumption - digital display

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 with control panel in the cabin, Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm, bandsaw blade length 11,500 mm Log feeding system, approx. 20 m long, four-strand with inserter Hnodpfx Agexvrnistot Block carriage with ejector onto block cross conveyor CANALI pneumatic clamping carriage, Type 501.09 with 4 clamping jaws, 3 log turners, 4 ejectors, Drive power 100 kW, carriage speed 5-120 m/min. Powered roller bed with slab extraction with brush, lifter with puller for end trimming Electrical switchgear cabinets complete Complete sharpening room equipment for bandsaw blades

Condition: excellent (used), CATALOGUE NUMBER 7219 TECHNICAL DATA - max. width of the workpiece: 200mm - max. height of the workpiece: 150mm Number of spindles: 4 1) horizontal, lower: 200mm, 5.5kW 2) vertical, right: 150mm, 4kW 3) vertical, left: 150mm, 4kW 4) horizontal, upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm Top: - 6 feed rollers, toothed, including 2 double rollers - 1 feed-out roller, rubber, double Bottom: - feed roller, toothed, helical, located in the lower table - 3 side pressure rollers - feed-out roller, metal, smooth - all rollers are pneumatically pressed - length of the feed table: 2130mm Hodpfjzu R Rmox Agtont - table adjustable up/down - central lubrication - electrical adjustment of cutting depth - lifting motor: 1.1kW - stepless feed speed adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3650x1750x1800mm - weight: approx. 3000kg ADVANTAGES – 4 heads – ideal for both wet and dry wood – DTR documentation available – used machine, very good condition Net price: 52900 PLN Net price: 12590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Numerical Control with NC 410 Software Machine suitable for 1st pass of the panel Motorized mobile shoulder opening by C.N. 1500mm Panel height 60 mm PVC/Abs mm 3 Continuously variable feed speed Working height adjustable electronically by C.N. Hnjdpfx Agorxzb Ujtst Motorized rubberized belt with superior pressure Squaring part composed of (for each side): * Double shredder group * Automatic timed anti-splinter unit Beading part composed of (for each side): * Gluing group for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with adjustable pressure rollers * 2-position reel magazine with automatic edge change * Overlapping trimming group with 2 motors * Gleaning unit with 2 tilting motors * Moulder group tiltable 0-90 ° * Edge scraper assembly * Glue scraper unit * Belt sander assembly * Brush group

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Hjdpfxoz Apcde Agtjnt Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm Hnsdpfx Aezk Nmrogtjt - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2008, PC OFFICE / WIN EDGE control Working height adjustable by C.N. Panel height (mm) 60 Feed speed mt / min 25 Upper motorized rubberized belt electronically adjustable by CN Side roller conveyor with idle wheels for panel support Rectifier group with two motors Reel holder warehouse Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with pressure rollers End trimming unit with 2 motors with automatic inclination adjustment Trimming unit with two superimposed motors Gleaning unit with 2 adjustable tilting motors Rounding unit with 4 motors Toupie unit tiltable 0-90 ° Sanding unit Hnjdpsw Dd Efjfx Agtot