Used Round Baler for sale (4,005)

Condition: good (used), Technical data: Working length: 2050 mm Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes Lhjdpfx Asxruvzjd Neb The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Condition: like new (used), Year of construction: 2021, Technical data: Conical bending machine Working width: 1050 mm Max. bending capacity for standard steel St40: 4.0 mm Diameter of conical upper roller: 70 - 185 mm Diameter of side and central lower rollers: 105 mm Conical bending device Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Ljdpjw An Uhofx Ad Nehb Very little used, as new condition The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: Working width: 2050 mm Max. bending capacity for mild steel St40: 6.0 mm Max. pre-bending for mild steel St40: 4.0 mm Top roller diameter: 170 mm Side lower roller diameter: 170 mm Middle lower roller diameter: 145 mm Cone bending device Hardened rollers Working height: 800 mm Mobile control panel Hydraulic folding bearings CE mark Motor power: 2.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Weight: approx. 3 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Lsdpswdwiqofx Ad Nshb

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Ledoxyvx Tjpfx Ad Nehb Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Lhsdpfxex Ii Hvj Ad Njb Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Lodpfx Ajv Htnijd Njhb Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Lhsdpjwchn Uefx Ad Nsb Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Ledpfx Adex Iitio Njhb Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Net weight: approx. 39 tons Additional equipment: Side bending aid Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Condition: new, - Capacity 700 x 4 mm - Conical rollers - Removable top roller - Brake motor Lhodoh Raytjpfx Ad Nob - Foot control - Emergency stop - Documentation - 400V

Condition: used, Stainless Steel Jakob Pipe Diameter 80 mm 5x 985 mm straight lengths 1x 90-degree bend 1x 30-degree bend 7x clamping ring 1x suspension bracket See our other listings Lodpfx Adox Nyl Ee Nshb VMA Wekerom

Condition: like new (used), Year of construction: 2020, Features of Rotary Table: - Designed for Fanuc controllers - Side-mounted motor with reduced backlash Lhjdpfex E Tazjx Ad Njb - Double worm gear for easy adjustment and higher precision - Detron-exclusive dual-piston braking system for increased clamping force Technical Specifications: - Table diameter: 255 mm - Center bore diameter: 65H7 mm - Table height (horizontal): 190 mm - Center height: 160 mm - T-slot width: 12H7 mm - Guide block width: 18 mm - Clamping method/pressure: 5–7 bar - Clamping torque: 400 Nm - Transmission ratio: 1/72 - Maximum table speed: 53.3 rpm - Permissible moment of inertia (W.D28): 1.38 kg/m2 - Resolution: 0.001° - Indexing accuracy: 20 seconds - Repeatability: 6 seconds - Net weight (without servomotor): 67 kg - Permissible load capacity (vertical): 125 kg - Permissible load capacity (horizontal): 250 kg - Permissible load with tailstock: 250 kg - Permissible clamping load (table clamped): F: 17,000 N - Permissible clamping load (table clamped): FXL: 1,265 Nm - Permissible clamping load (with table locked): FXL (diagonal): 400 Nm - Permissible cutting torque: 260 Nm - Maximum permissible number of rotary joints: 4 Features of Tailstock: - Manual tailstock with removable Morse taper - Fully sealed unit - Center height: 160 mm

Condition: used, Complete round timber sorting line / debarking system / log yard, consisting of: - 2-section round timber infeed (total of 8 decks) - Log feeder - Log aligner - Log transfer carriage - Bruks root reducer - Cross-cut saw for long logs - Cross conveyor - Log transfer carriage - Infeed to debarking - CHE Johanson 660 SH debarking machine - Sprecher Automation SELSCAN 512 log measurement system (year of manufacture: 2002) - Sorting conveyor - Log boxes: 8 left, 8 right (with overflow boxes for long logs) Ledpfx Ajxb N U Ded Nehb - Switch cabinets - Control system - Bark scraper conveyor Immediately available – Location: Austria near Linz

Year of construction: 2021, operating hours: 200 h, condition: like new (used), Amos Belt Press OPUS 1200 including fruit washer Amos ELE 280 N. The entire system is made of stainless steel, including the electrical control cabinet. Few operating hours. The unit is being sold due to the acquisition of a larger press system. Lhodpewimqzofx Ad Neb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1760x1150x1320 mm Weight 1100 kg Lhsdev A Hykopfx Ad Njb Total power requirement 4,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x1300x1780 mm Weight 1000 kg Lsdpfx Adsvz Egyj Nohb Total power requirement 5,5 kw

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic Lhjdpoi Exp Ejfx Ad Njb -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Condition: like new (used), Year of construction: 2021, We offer for sale a Jenoptik Formline Roundscan 535 form measurement machine. Suitable for measuring, for example, shafts. The machine has been used very little and is in like-new condition. Lsdpfx Adjx Ndnkj Nehb Year of manufacture: 2021 Technical specifications

Condition: reconditioned (used), CAZENEUVE HB 575 x 1500 Lathe Distance between centers: 1,500 mm Center height: 250 mm Swing over bed: 575 mm Swing over cross slide: 525 mm Swing over carriage: 300 mm Spindle bore: 51 mm Tailstock taper: MT5 Max cross slide travel: 305 mm Number of spindle speeds: 18 Power: 10 Hp Lhsdpfx Aox Ebwfod Njb Spindle speed: from 32 to 1,600 rpm Electrical cabinet Dimensions (L x W x H): 2,905 x 1,175 x 1,345 mm Weight: 2,050 kg New Heidenhain DRO Multifix tool post – Fixed steady rest New 2-axis Heidenhain DRO

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, total height: 1,760 mm, overall weight: 15,000 kg, total width: 2,100 mm, total length: 8,050 mm, table diameter: 900 mm, center height: 1,200 mm, spindle bore: 128 mm, Lathe STANKO Brand: STANKO Type: RT 117 Swing over bed, mm: 1200 Lhjdpox Ebttofx Ad Neb Swing over carriage, mm: 900 Distance between centers (DBC), mm: 5000 Maximum workpiece weight between centers, kg: up to 10,000* Spindle bore diameter, mm: Ø128 Spindle speed, rpm: 5 ÷ 500 Main drive power, kW: 22 or 30 Machine weight, kg: 11,000

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Lhsdpfx Ajx D U N Sjd Neb Year of manufacture: 2012

Condition: new, BRAND NEW ROTARY TABLES / INDEXING TABLES Lhedpfjm Tvz Djx Ad Nob Working position: vertical – horizontal Applications: positioning – stepless rotation // interpolation Rotary table faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm – Clamping surface can also be square – Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Integration into machines with HEIDENHAIN or SIEMENS controls. Only inquiries from Germany will be answered /// Only inquiries from Germany will be processed.

Condition: used, Log feeder with limit switches and motor. Length 6.30 m, width 1.70 m, height 1.15 m, weight under 5 t. Ex works price: 6,000 EUR. Lhsdpfx Adexdckqj Nsb

Year of construction: 1982, condition: good (used), Motorized round bending machine FASTI type: 106-20-2 year 1982 Lhjdok Iymxjpfx Ad Nob Bending capacity : 2040 mm X 2 mm in steel Rollers diameter 110 mm , with bending . Roll drive motorized Rolls adjustment motorized Space requirement: 2,5 m X1 m X 1,2 Weight.ca.2000Kg. Machine in Good Condition Undercurrent Demonstratable .

Condition: good (used), Year of construction: 1990, Round table, make PEISSLER PRT 500 DM 500 mm. Lsdevk D Sgjpfx Ad Njhb Good condition.

Condition: excellent (used), Year of construction: 2010, 4-axis PEISLER Type :RT-215 Year 2010 ( 3rd piece available ) Center height: 215 mm with power chuck Fabr.RÖHM Type:KFD-HS215/3 Fmax.48KN Nmax.3000/min Lodot Daxxopfx Ad Njhb with hydraulic connection for chuck and drive shaft on both sides, without motor and controller in very good condition. Quoted price is for one piece .