Used Rotary Valve for sale (9,746)

Condition: used, Rotary valve, rotary airlock Ncsdpfjxgr Svjx Ad Njl Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: like new (used), functionality: fully functional, machine/vehicle number: Drop 31, input voltage: 380 V, year of last overhaul: 2022, inner dimension length: 250 mm, inner dimension width: 250 mm, Good as new lock inlet square 250x250 sheets 10mm thick Nodsuigtrjpfx Ad Necl completely stainless steel motor 0.55 kw 17 rpm maintained annually 5 pieces available

Condition: used, Year of construction: 2006, functionality: fully functional, 2 pieces rotary valve dosing feeders ! Price per unit ! Manufacturer: Torex Model: RV20 Connection size inlet/outlet: 300 x 300 mm Overall height: 455 mm Sealing strips made of rubber Bolted plastic lining of the individual compartments for improved discharge. Nedpfx Aoxd Dukjd Necl Functionality has been checked! Bearings can be relubricated from the outside. Last used for dosing hydrated lime. Drive power: 1.5 kW Speed: 30.9 rpm

Year of construction: 2008, condition: new, Type: XZF / QA90L4A Ncsdpfxjizz D Ts Ad Nsl Serial number: Power: 0.33 MPa / 1.5 kW Speed: / 1.390 rpm Diameter top: Weight: 210 kg Dimensions: mm Condition: unused

Year of construction: 2015, condition: excellent (used), Rotary valve: JKF type:B-500S (dosing/mixing unit - 3 Pcs.) Device for dosing/mixing EPS polystyrene granulate and regranulate or other similar products. Rotary valves type B-S are fitted with an 8-bladed rotor with hard-wearing rubber blades bolted to the rotor shaft plate profiles. The rotor is separated from the rotor housing by felt ring. The shaft is suspended on bearings and connected directly to the gear motor. The rotor is made of 2 mm plate. Ncsdpjumkm Ssfx Ad Nsl Year of production: 2008, 2008, 2015

Condition: new, Year of construction: 2023, machine/vehicle number: U-231811/2, 1x VDL HT350 rotary valve without drive (with drive available at extra cost). These are new and have never been used; manuals and flange gasket are included as new. The valves are supplied without drive. Size: DN350 Housing: Painted cast iron Rotor: Stainless steel with rubber blades Nodpjvpg Axofx Ad Njcl Bearings: External slide bearings At 100% fill, 10 liters per revolution.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, volume flow: 75 m³/h, overall weight: 1,250 kg, inner dimension width: 500 mm, total length: 2,150 mm, total width: 900 mm, total height: 800 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 14 rpm, torque: 2,750 Nm, 3 pieces of rotary valve Rotary valve Manufacturer Kreisel Type: ADG 630x800-11 LUG Version with explosion protection: Ex II1D /3DGc-20°C / +60°C Inlet and outlet internal dimensions: 500 x 800 mm Height 800 mm, Housing made of material: 1.4571 Rotary valve Ø 630 made of material 1.4571 with side discs and 12 chambers, Wear/sealing strips made of spring steel C60G (0.0601 / hardened), adjustable, reversible and replaceable via inlet and outlet, external roller bearing, sealing of the shaft feedthroughs in the housing using adjustable and relubricable stuffing box packings, shaft protection sleeves, incl. Switching flag with 4 pulses/rev and protective cover, bearing shields with purge air connections, console for flange gear motor (lantern), drive via elastic coupling and gear motor, theoretical delivery capacity at 100% filling and 14 rpm: 1.25 m³/min (75 m³/h) Vibrator: Manufacturer Netter. Drive: electric Power: 0.11 kW Centrifugal force: 627 Newtons Total weight including gear motor: 1250 kg Overall dimensions: Length: 2150 mm Width: 900 mm Height: 800 mm Gear motor Ncedovzk Shepfx Ad Nel Motor data: SEW RF97 AM112 M2BA112M4 Voltage: 400 volts Power: 4.0 kW, Speed: 14 rpm

Condition: good (used), Probat HDF 100 rotary valve overall dimensions: 140 cm long, 45 cm wide, 55 cm high. Inlet opening: 46 cm x 9.5 cm. Weight: 270 kg. Nodpfx Ajwgl A Ded Necl

Condition: good (used), inside Ø approx. 1,400 mm inside width: approx. 1,200 mm Electric geared motor: 22 kW Nedpfsr Dbwlex Ad Necl Offer without guarantee of availability

Year of construction: 2020, condition: good (used), Rotary valve, Comav dosing valve, rotary airlock, drop-through valve Rotor diameter 400 mm Dimensions: see photos Ncsdpfx Ajwyf Nwsd Nol Manufacturer: Comav Type: VSD 400 Year of manufacture: 2020 Completely stainless steel Venturi diameter: 100 mm Motor power: 0.75 kW See our other listings.

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 Nodpfeq Igyvsx Ad Nocl 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). Ncjdpfx Ajq Nfuzed Nol 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: Ncodpfx Aeq Nyzbed Njl - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: good (used), Table size:1500x1500mm Ncodpfx Adefvqmxj Njl Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic

Condition: used, Year of construction: 2000, overall weight: 260 kg, table diameter: 70 mm, Rotary Table Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg Ncjdjyddivepfx Ad Njl If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1992, Machine-Details: Stock-No. 1022-2360 Type of machine Rotary Table Surface Grinding M/C-Horiz. Make ABA Type FRU 800 NC Year of manufacture 1992 Type of control NC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW Ncedpfx Asydc Rrod Nel weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Nodpfxju Dbkdo Ad Necl Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Ncjdpfsya Dtmex Ad Njl

Condition: used, Technica brand, Stemoflex model rotary transfer machine Ncjdpoydcm Hjfx Ad Nol

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Nsdpfx Adswugczj Njcl Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 2013, Clamping Force: 60 tons (600 kN) Ncodpfxowp E Hzo Ad Nol Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Noise level: 68 dB(A) Tank capacity: 400 liters Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Cooling: Air-cooled Integrated dryer: Yes Ncjdpfx Aewgca Tjd Nel Control system: Elektronikon®

Condition: excellent (used), functionality: fully functional, rotary table diameter: 600 mm, grinding height: 300 mm, disc diameter: 400 mm, grinding diameter: 600 mm, Manufacturer: ELB-SCHLIFF Model: SWR 50 T Completely overhauled: 2008 Delivery time: immediate Grinding area: Ø 600 x 300 mm Grinding wheels: max. Ø 400 x 100 x 127 mm Nodou Ed Nlspfx Ad Nscl Spindle taper: 60 mm Installation dimensions: approx. 2800 x 2800 x 2300 mm (L/W/H) Total weight: approx. 5000 kg Control system: Siemens PLC

Condition: used, table diameter 5600 mm table load 150 t x-travel / mm total power requirement 88 kW weight of the machine ca. 55 t Round table dm 5600 mm / 150 to load Round table dia. 5600mm / 150 to load Equipment: Table with drive motor Status: closed since 1980 Machine Type:C.T.F Diameter core face plate: 3000 mm Diameter ring faceplate: 5600 mm Core and ring faceplate can be coupled: yes Faceplate divisible into segments: no Max. workpiece weight: 150000 kg Njdpfx Aohmzkbed Necl Table weight approx.: 55000 kg Dimensions: Dm 5600 x H 1500 mm filming operation Speed: 0.1 - 20 rpm Rotation levels:4 Drive power: 88 KW milling operation Speed: 0.0002 - 0.2 rpm Peripheral speed (5000 mm): 3140 mm/min Drive power: 11 KW

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection Ncjdsrmulvjpfx Ad Nel ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...