Used Rotary Machine for sale (65,961)

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table Kdedpfx Ajdzp T Nohvji - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, machine/vehicle number: 65333, Equipment: type plate available, Rotary indexing machine No. 171 Coil winding machine Blume & Redecker 8 stations, double flyer, max. wire diameter: 2 x 1 mm No. 170 Coil winding machine Blume & Redecker 8 stations, single flyer, max. wire diameter: 1.4 mm Kdjdoylx Tlopfx Ahvji

Condition: like new (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed length X-axis: 500 mm, feed length Y-axis: 300 mm, feed length Z-axis: 180 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: Eding CNC, spindle speed (min.): 20,000 rpm, input voltage: 220 V, number of axes: 4, Equipment: rotational speed infinitely variable, For sale is a compact BZT CNC milling machine (E-ST series) with a fully enclosed safety housing. The machine features a 3-axis configuration including a 4th axis (rotary table) and is suitable for precise milling operations in aluminum, plastics, and non-ferrous metals. Key features include: robust machine frame, T-slot table, frequency-controlled high-speed spindle, manual pulse generator (MPG), integrated frequency inverter, safety limit switches, and clean internal wiring. The machine is in well-maintained optical and technical condition. Kdjdpfx Ajykvp Iehvei

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Kdjdsxf Uwxjpfx Ahvji Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Year of construction: 2013, condition: like new (used), functionality: fully functional, Trepko 222-1K rotary filling machine whit 2x moulds. Previously filling yoghurt products and other dairy products. Mould No 1. Diameter 185 mm No 2. 90 mm. Ksdeydplcjpfx Ahvsdi Year of construction 2013.

Condition: good (used), functionality: fully functional, machine/vehicle number: C7154, Powtek - gericke rotary sieve housing: steel rotor: steel inlet: stainless steel Ø300mm outlet: stainless steel Ø300mm transition sieve deck: nylon sieve deck 2mm Kdedjvz Smmspfx Ahvoi coarse outlet: adjustable

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 8,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with pallet changer on moving column (ROTOPALLET) with spindle line and spindle motor fully refurbished as new. CNC SIEMENS 840D. Tool magazine with 40 positions. Chip conveyor. High-pressure pump through the spindle. Spindle cooler. Remote electronic handwheel. Kdsdpfx Ajydhyxohvsi

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Kdedpsi Ew Dpjfx Ahvsi

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Kodep S Sq Depfx Ahvodi

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Ksdpfx Ahow Hglmjvedi

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Kjdpfx Aovriq Rehvjdi

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Kedpfsw Emx Rex Ahvodi

Condition: ready for operation (used), Year of construction: 1997, A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible. Ksdpfxju T Rg Rs Ahvodi

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Ksdpfeu T Rhbsx Ahvjdi

Condition: ready for operation (used), Year of construction: 2012, A special-purpose rotary transfer machine for aluminum processing, rebuilt by Stöferle, is available. 1) Complete machine, connected load: 120kW, hydraulic pressure: 50bar, pneumatic pressure: 6bar, transport width: approx. 2600mm, stations: 8, machine dimensions X/Y/Z: approx. 3000mm/2600mm/2800mm, weight: approx. 9500kg. 2) Coolant system Knoll with scraper belt conveyor, year of manufacture: 2010. 3) Hydraulic system Hydropa. 4) Pneumatic system Festo. 5) Central lubrication system ALS. Documentation available. An on-site inspection is possible. Kjdpfx Ahew Rqw Tjvodi

Condition: new, Year of construction: 2026, rotary table diameter: 500 mm, CNC-controlled rotary table surface grinding machine with horizontal grinding spindle – brand new Kdsdpfjyhzn Uex Ahvei Rotary table diameter: Ø 500 mm Maximum grinding diameter: Ø 600 mm Maximum workpiece height: 250 mm Grinding wheel dimensions: Ø 300 / 127 mm x width 50 mm Grinding spindle drive power: 5 kW Rotary table speeds: 0 to 60 rpm – infinitely programmable Maximum workpiece weight: 500 kg Rotary table drive power: 3 kW / 10.5 Nm Weight: 3,000 kg Hydrostatic rotary table bearing Hydrostatic support of the cross slide. The machine structure is made of MEEHANITE® cast iron. This material offers outstanding physical properties such as: - Very high wear resistance - Excellent vibration damping - Low coefficient of friction

Condition: new, Year of construction: 2026, functionality: fully functional, Flexbility: Our Rotaflex machines stand out due to their exceptional flexibility, surpassing that of competitors. These machines are versatile, capable of performing a variety of operations including turning, milling, threading, and recessing. Each station operates independently with up to 5-Axes, ensuring efficient and precise machining. Kodpfx Aeyg Nwdshvedi Advanced Turning Capabilities: Rotaflex machines are designed for real turning operations, featuring chucks that can simultaneously position on the B axis and perform turning at speeds up to 6,500 RPM. Please find the demonstration videos below: Innovative Plug-and-Run Chucks: Our Plug-and-Run Chucks enable swift chuck changes within seconds, allowing for seamless transitions between jobs. This technology sets Technica apart in the rotary transfer machine industry. Why Choose Technica Rotaflex Machines: Technica machines offer unparalleled versatility and precision, making them ideal for mass production environments that demand high-quality and adaptable machinery. Combining Swiss engineering precision with the multifunctionality, our machines provide reliable and efficient performance.

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Year 1988 Pristine Condition Not been used for 15 years Kdsdpjdg Da Isfx Ahvsi

Condition: used, Technica brand, Stemoflex model rotary transfer machine Ksdpeydcm Hofx Ahvodi

Condition: good (used), Rotary Table Surface Grinding Machine ARTER A3 - 16 Ksdpfoyc Hkysx Ahvsdi - Max. grinding diameter: 450 mm - Grinding height: approx. 220 mm - Workpiece weight: approx. 250 kg - Automatic feeds - Coolant system - Machine enclosure - Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight 3500 kg Subject to errors and typos.

Year of construction: 2010, condition: excellent (used), Technogel 4000E Rotary filling machine Kdjdpfxsnxlvhj Ahvsi Serial: RA1091/01E 2010, Stainless, compact rotary filling machines, capacity 4000 pcs per hour, HMI screen controls, variable speed, mobile, 3Ph

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Kdodpfxjubbryj Ahvei Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: used, Manufacturer : AZO Kedpfjx R A U Sex Ahvjdi Model: E450 B1 Type : Rotary sieve Application : Control and safety screening Stainless steel Motor power : 1,3 kW ATEX classification: Exe G1-3 Te 30 Capacity: max 6000 KG / H depending on screen size Documentation available

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: Ø approx. 217 x 18 mm -Recess: Ø 90 mm -Degree display -Dimensions: 275/340/H90 mm Ksdpfx Aogwhvhshvedi -Weight: 20.6 kg

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, rotary table diameter: 1,000 mm, grinding height: 500 mm, table diameter: 1,000 mm, CNC rotary table grinding machine with 1000 mm magnetic chuck, turret carrier with 3 grinding spindles (external, face, and internal grinding spindle). CNC control Sinumerik 840C, Simodrive 611 drives, coolant tank, currently still in operation, now being dismantled. Delivery also possible as overhauled and with new electrics upon agreement. Total weight 20,000 kg. Kjdpfxowv Sc Ao Ahvjdi