Used Rotary Lathe for sale (8,973)

Condition: excellent (used), Year of construction: 2019, Doosan Puma 4100B 2-Axis CNC Lathe Year of manufacture: 2019 Control system: FANUC i Series Specification: Maximum turning diameter: 550 mm Maximum turning length: 1042 mm Hydraulic chuck: 15 inches Bar capacity: 116.5 mm Maximum spindle speed: 2000 rpm Spindle nose: ASA A2#11 10 tool stations External tool dimensions: 32 x 32 mm X-axis travel: 352 mm Z-axis travel: 1105 mm Rapid traverse X-axis: 16 m/min Rapid traverse Z-axis: 20 m/min Tailstock sleeve taper: MT#6 Spindle motor power: 35 kW Tool probe Lrjdpfx Ajyvqnkshvoi With the machine: - Documentation Tool holders: - 3 pieces for drilling - 4 pieces for turning tools

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 324, turning length: 525 mm, turning diameter: 160 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 222 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, quill travel distance: 80 mm, quill diameter: 75 mm, overall weight: 5,000 kg, swing diameter over bed slide: 450 mm, swing diameter over top slide: 300 mm, controller manufacturer: MORI SEIKI, controller model: MORIC-T5F, Equipment: chip conveyor, documentation/manual, MORI SEIKI SL-15 M CNC Lathe Lodpfxsyvq Nuo Ahveri - Operating voltage: 380 V - Frequency: 50 Hz - Connection: 20 kVA - Swing diameter over bed: 450 mm - Swing diameter over turret slide: 300 mm - Distance between centers: 595 mm - Standard diameter: 160 mm - Front bearing inner diameter: 90 mm - Number of tools: 12, max. 6 stations for driven tools - Tool shank cross-section: 20 mm - Max. boring bar shank diameter: 32 mm - Driven tool spindle speed: 100 – 2000 rpm - Feed rate on X-axis: 0.00001 to 250 mm/min; Z-axis: 0.00001 to 350 mm/min - Rapid traverse speed X and Z axis: 1260 mm - Tailstock travel: 450 mm The machine is equipped with a tailstock, a 12-station tool turret (including the tool holders shown in the photos), and a chip conveyor. Note: This item must be collected between 12.05. and 22.05.2026 on a specific date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,416 h, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 630 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 3,500 rpm, total height: 1,720 mm, total length: 2,870 mm, total width: 1,675 mm, overall weight: 4,500 kg, chuck outer diameter: 260 mm, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, The Hwacheon Hi-Tech 200BL is a robust CNC lathe that stands out in practice for its strikingly simple operation. The machine features an intuitive design and predictable performance, making setup and operation feel quickly familiar. Ledpfx Aheyvqw Sjveri A major advantage is the configuration with only an X and Z axis. The lack of additional axes and complex functions keeps the operation clear and efficient. This HWACHEON HI-TECH 200BL machine is standard equipped with: - Chip conveyor + collection bin. - Schunk 3-jaw chuck (ROTA NC Plus 260-86) including various sets of top jaws. - Original HWACHEON and FANUC documentation. Weight & dimensions: - 4,500 kg - approx. 2870 x 1675 x 1720 mm (LxWxH)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1704 005, spindle bore: 45 mm, total length: 1,850 mm, total width: 1,100 mm, total height: 1,800 mm, spindle speed (max.): 4,000 rpm, overall weight: 2,000 kg, DMG MORI NEF 360 LZ Lead and Feed Screw Lathe Lredpfx Ahoyvql Nevoi - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 10 kVA - Rated current: 25 A - Centre distance: approx. 750 mm - Centre height over bed: 190 mm - Swing over bed: 380 mm - Centre height over cross slide: 120 mm - Swing over cross slide: 240 mm - Spindle bore: approx. 45 mm The machine is equipped with a tailstock, a Multifix tool holder, as well as a HAINBUCH clamping system, diameter: 140 mm, and a two-axis digital readout by DMG MORI. Please note: The item must be collected firmly between 12/05 and 22/05/2026 at an exact date to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Lredpfeixt I Hex Ahvji Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: new, AGRE ALUP SCK 10-10 270+ Lsdpfx Aeixt H Nshveri Belt driven. Space saving. Inexpensive. Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 lt

Condition: good (used), Year of construction: 2000, 1 4-Bahnen-Flachbett (die 2 äusseren für Z-Schlitten; 2 innere für Reitstock) mit verfahrbarem Z-Schlitten auf äus seren 2 Führungen; Abstand 1160 mm auf inneren Führungen für Reitstock 700 mm Bettlänge mm 5300 Spitzenweite (Drehlänge zw. Futter-Höhe und Spitzen ) mm 3000 Spitzenhöhe mm 800 Drehdurchmesser über Bett mm 1600 Drehdurchmesser über Kreuzschlitten (zwischen Spitz en) mm 1400 Umlaufdurchmesser über Schlitten mm 1200 Bettbreite Führung Aussen mm 1160 Führungsbreite Reitstock MItte mm 700 Bett geschweisst; entspannt durch WIAP-Ersatzglüh- verfahren und vibrationsgedämpft nach dem pat. Verf ahren WIAP® VDSF® (Pat.Nr. 68433; Anm.4230130.30;PCT/CH95-00108; PCT/CH95-00108, PCT/CH95-1072, PCT/CH95-1073) Führungsauflagen geschliffen; Führungen austauschba r ohne Bettdemontage 1.2 Spindelstock / Hauptantrieb - festangeordnet Anzahl Spindelstöcke Stk. 1 Spindelmesskreis digital / linear Achsenlagenüberwachung keine; da Rundachse Spindelbohrung mm 112 Spindelnase A15 DIN 55021 Hauptspindelmotor: 100% ED kW 46 Nm 305 Motor 1PH7184 2NE Leistungsteil 6SN112-1AA00-0FA Hinter dem Spindelstock aufgebautes 3 Stufen Getrie be Automatisches über M Funktion programmierbares Getriebe Getriebstufe 1 RPM 5,6-120 Getriebstufe 2 RPM 16-360 Getriebstufe 3 RPM 45-800 Lredpfx Aod D Nxkehvsi Drehmoment Stufe 1: (100%) Nm 15236 Drehmoment Stufe 2: (100%) Nm 5290 Drehmoment Stufe 3: (100%) Nm 1904 Max Drehzahl RPM 800 1.3 Längs- und Querschlitten Stk. 1 Anzahl Querschlitten Stk. 1 Anzahl Längsschlitten digital / linear Achsmessystem am Motor Balluf Achsendlagenüberwachung (3er-Schaltpaket) RpM 2000 Achsantrieb Z-Vorschubmotor 27 Nm mm 1005 2 X Schlitten unabhängig verfahrbar Max Abstand in nen Ueber M Funktion ankoppelbar X Schlitten 1 4 Fach Rev. und X Schlitten 2 mit Angetr. Revolver kN 27 Vorschubkraft mm 6000 Max Vorschub / Eilgang Z mm 63 x 10 Vorschubart: spielfreie Kugelrollspindel mm 3020 Verfahrweg Z-Achse m / min 6* Eilgang Z-Achse (Auslegung 10 m / min) RpM 2000 Achsantrieb X-Vorschubmotor 1FT5076 18/22 Nm kN 15 Vorschubkraft mm 6000 Max Vorschub / Eilgang X mm 50 x 10 Vorschubart: spielfreie Kugelrollspindel mm 850 Verfahrweg X-Achse m / min 10 Eilgang X-Achse 1.3a Reitstock manuell verstellbar; luftunterstützt für leichtes V erschieben vibrationsgedämpft mit Konus für Reitstockspitze Pinolen-Durchmesser mm 200 Pinolen-Hub mm 200 Hilfsschleppeinrichtung mit dem Z-Schlitten vorhand en Klemmung mit Mutter & Hebel / Ringmutter mit div. Gewinden im Umkreis; versetzbar 1.4 Führungen Alle Führungen sind auf geschliffenen Flächen und reibgeklebt Abmessungen mm 90 x 50 Härte der Stahlführungen ca. HRc 55 - 60 Gegenführungen kunststoffbeschichtet Automatische Zentralschmierung mit elektr. Kontroll e Die schweren Einheiten werden für den Leichtlauf un d gegen Verschmutzung luftunterstützt mit dem WIAP® Press-Air-Verfahren 1.5 Werkzeugrevolver mit angetriebenen Werkzeugen Werkzeugrevolver Baruffaldi TOER 320 Typ K18.0320.12041.B Anzahl Pos Pos 8 Zylinderschaft-Durchmesser VDI 60 Revolver Scheibe Durchmesser aussen mm 570 Revolver Scheibe Durchmesser VDI 60 mm 476 Scheiben Dicke mm 95 Angetriebene Werkzeuge Stk. 4

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Ljdpfx Ahshun Tzoveri Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Mounted refrigeration dryer. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min incl. time controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: good (used), Year of construction: 2008, Steuerung: Fagor CNC8055 Aufnahme: VDI30 Späneförderer Lredpfx Ahjim H Unsvei Werkzeugwechsler: Sauter Revolver 8Fach Z-Achse: 810mm X-Achse: 280mm Spitzenweite: 1000mm Drehfutter: Röhm Duro, Durchmesser 200mm Drehdurchmesser über Schlitten: 230mm Drehdurchmesser über Bett: 460mm Spindeldurchlaß: 56mm Spindeldrehzahl: max. 3100 U/min. Werkstückgewicht max.: 570kg Antriebsleistung: 18kw Maschinen Abmessung: Länge 3660mm – Breite 1870mm Gewicht Maschine: 2900kg

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Lrjdpoyvp R Rjfx Ahvei Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Ledpfxsyvpyrs Ahveri Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Year of construction: 1997, condition: ready for operation (used), - USED - CONVENTIONAL LATHE CENTRE HEIGHT: 102 mm DISTANCE BETWEEN CENTRES: 450 mm MAX TURNING DIAMETER OVER BED: 200 mm Lodpjyvlxqofx Ahveri MAX TURNING DIAMETER OVER CARRIAGE: 120 mm BAR CAPACITY: 25 mm SPINDLE: 50 - 5000 rpm; 3 kW TAILSTOCK TAPER: CM 2 QUILL DIAMETER: 30 mm QUILL TRAVEL: 80 mm TURRET HEAD: MULTIFIX OVERALL DIMENSIONS: 1500 x 510 x 1550 mm

Condition: not inspected (used), Year of construction: 2009, machine/vehicle number: 2805.09, Cycle Lathe DMT Kern CD 402 Condition: Not tested Delivery terms: Free loaded truck Location: 63773 Goldbach Availability: By arrangement Payment terms: Advance payment by bank transfer Internal no.: S1 Inspection under power: Can be inspected under power until 24.03. Technical Data: Control: Heidenhain MANUELplus 620 Operating hours approx.: 2265 WORKING RANGE: Swing diameter over bed: 400 mm Swing diameter over cross slide: 230 mm Cross slide travel (X): 250 mm CENTRE DISTANCE / TURNING LENGTH: Centre distance: 1000 mm Ledpfxjyvldtj Ahvjri MAIN SPINDLE DRIVE: Power (Digital AC motor - 40 / 60 / 100%): 16 / 15 / 12 kW Gear steps: 2 SPINDLE HEAD: Spindle nose: DIN 55026 – Size 6 Spindle bore / clearance: Ø82 mm Spindle diameter in front bearing: 110 mm Speed range: 1 – 3000 rpm CROSS SLIDE / FEEDS: Feed transverse (X): 0.001 – 1000 mm/rev Feed longitudinal (Z): 0.001 – 2000 mm/rev Rapid traverse transverse (X): 5 m/min Rapid traverse longitudinal (Z): 10 m/min Feed force transverse (X): 5000 N Feed force longitudinal (Z): 7000 N TAILSTOCK: Quill diameter: Ø60 mm Quill travel: 140 mm Quill taper: MT 4 ELECTRICS: Connection: 400 V / 50 Hz EQUIPMENT: 8-position tool turret with three tool holders and one tool mount Tailstock Three-jaw chuck Mist filtration unit SCOPE OF DELIVERY: Available documentation A Garant drawer cabinet including a large number of tool holders, tool mounts, jaws, and drills as per the pictures DIMENSIONS & WEIGHT: Setup dimensions L x W x H approx.: 2650 x 1600 x 1900 mm Weight approx.: 2500 kg If you have any questions or would like to arrange a viewing, please contact us! Additional Notes: ► On request, we can offer transport to the destination ► The offer price is net plus VAT ► The goods are sold under exclusion of any warranty ► Technical data without guarantee ► Subject to prior sale ❗ Sale of the goods is exclusively to businesses ❗

Condition: used, Year of construction: 2001, operating hours: 51,500 h, machine/vehicle number: IntNr230346, CNC sliding headstock lathe STAR SR20R, year 2001 Control, Fanuc, Series 18i-T, 7 axes (X/Z/Y/C1/X1/Z1(C2), Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle with collet chuck, max. speed 8,000 rpm, C-axis, Tool holder for a total of 19 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, Lrsdpfx Asyvk N Iohvji standard guide bush unit Loading magazine FMB turbo 3-26/3200 / A /, year 2001 Machine coolant: oil. Extinguishing system Kraft & Bauer The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as subject to prior sale! used CNC sliding headstock lathe STAR SR20R, year 2001 control, make Fanuc, series 18i-T, 7 axes (X/Z/Y/C1/X1/Z1(C2), bar-Ø max. 20 mm, turning length max. 205 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, counter spindle with collet, speed max. 8.000 rpm, C-axis, tool holder for a total of 19 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, standard guide bush unit loading magazine FMB turbo 3-26/3200 / A /, year 2001 Machine coolant: oil. Extinguishing system Kraft & Bauer The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as subject to prior sale!

Condition: used, Year of construction: 1990, turning length / mm control / centre height / mm Lrjdpsyvkw Esfx Ahvoi CNC Turning Center MAZAK MULTIPLEX 420 For sale: CNC turning center Mazak MULTIPLEX 420 with 2 spindles and 2 turrets. Ideal for series production and complete machining. Accessories: Comes with a large set of accessories (see pictures). Machine in good condition. Inspection possible by appointment. Feel free to get in touch if interested.

Condition: used, Year of construction: 1995, turning length / mm control / centre height / mm MAZAK MULTIPLEX 620 MARK II CNC turning and milling center including FLEX-GL100N portal loader with two spindles and two turrets Lrodpfjyvkv Ijx Ahvsi

Condition: used, Year of construction: 2015, bed width 350 mm turning length 1.000 mm control Manual plus 620 Heidenhain greates pass round over bed 430 mm Swing dia. over traverse guideway 220 mm turning speed range - main spindle 1 - 3.600 min/-1 power capacity - main spindel 9 / 11 kW max. Torque ca. 200 Nm spindle head DIN 55027 / 6 spindle diameter in front bearing 110 mm spindle bore 80 mm usable bar diameter max. 80 mm System MultiFix Shank diameter 20 x 20 mm x-axis 230 mm z-axis ca. 1.000 mm diameter of quill 70 mm quill stroke 150 mm taper of center MK 5 hollow fix: 12 -150 mm hollow var: 12 -125 mm rapid traverse X: 10 / Z: 7 m/min feed power X: 4 / Z: 5 kN weight of the machine ca. 3,2 t dimensions of the machine ca. 2,8 x 2,1 x 1,9 m Lsdpsyvkr Ajfx Ahvsri Lathe cycle controled SEIGER - SLZ 420 E / 1000 - WITHOUT three-jaw chuck - Impulse lubrication Flow rate: 0.1 l/min, Pump pressure: 30 bar, Tank capacity: 2 dm³

Condition: used, TECHNICAL DETAILS - Number of spindles : 8 - Number of counter-spindles : 1 - Hirth teeth Lrjdpfx Ahjwdag Eovji - Number of cross slides : 8 - Max. production : 50 [parts/min] SPINDLES * Max. bar diameter : 21 [mm] * Spindle speeds : 620-6000 [rpm] COUNTER-SPINDLE - Mechanical counter-spindle POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 4700x1200 [mm] - Machine height : 2250 [mm] - Machine weight : 5850 [kg] EQUIPMENT - CNC : Fanuc Power mate - Oscillating stop - Coolant tank - Cooling unit - Bar loader : PRA 40/33F - Bar holder and stand

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm Lrodpfox Rdgpsx Ahvei - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: SL375, CNC Lathe XYZ SLX355 ● Condition: Unchecked ● Delivery terms: Free loaded on truck ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – The pickup period for the equipment is set for 06/05/2026 and 07/05/2026. Unfortunately, collection outside this timeframe cannot be accommodated. ● Payment terms: Advance payment – by bank transfer ● Internal reference number: DÄ5 ● Inspection under power: Yes Technical specifications: ● Control system: PROTO TRAK SLX ● Drive power: 5.5 kW ● Spindle speed: max. 4000 rpm ● Turning length approx.: 750 mm ● Swing over bed approx.: 400 mm ● Swing over cross slide approx.: 180-200 mm Equipment: ● Three-jaw chuck (diameter: 200 mm) ● Tailstock ● Quick-change tool post Scope of delivery: ● Available manuals ● Set of quick-change tool holders with turning tools ● Four-jaw chuck (Röhm, diameter: 160 mm) ● Toolbox with accessories as shown in the images Dimensions & weight: ● Footprint (L x W x H) approx.: 2300 x 1400 x 1900 mm ● Weight approx.: 2000 kg If you have any questions or wish to arrange an inspection, please do not hesitate to contact us! Additional notes: ►Transport to the destination can be offered upon request Lrjdpfxeyvi A Ts Ahvoi ►The offer price is net plus VAT ►The equipment is sold with exclusion of any warranty ►Technical data provided without guarantee ►Subject to prior sale ❗Sale exclusively to business customers❗

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Fanuc control, turret with Y-axis, two Y-axes on driven tools, sub-spindle, chip conveyor, FMB bar feeder, extensive accessories. Lodeyvi Amepfx Ahveri

Condition: good (used), Year of construction: 2018, functionality: fully functional, Fanuc control, sub spindle, driven tools, chip conveyor, FMB bar feeder. Ljdpfx Ahoyviyxjvori

Condition: good (used), Year of construction: 2012, functionality: fully functional, Fanuc control, sub spindle, driven tools, chip conveyor, FMB bar feeder. Lrjdpfx Asyviw Djhvsi

Condition: good (used), Year of construction: 2010, 2010 Hankook Protec-7NB Heavy Duty Flat Bed Lathe with Fanuc Series 21i-TB CNC Control Ledpfx Aeywzu Rshveri

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Model: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Center height: 185 mm Spindle bore: 40 mm Spindle flange: KK5 (DIN 55022) Spindle taper: MT5 Speed range: 20 – 1,600 rpm Digital readout: Heidenhain VRZ 773 B (2 axes) (Scales on compound and carriage) Dimensions: 1,900 x 900 x 1,700 mm Additional equipment: Lodpfxow Svtcs Ahvsri - Spindle brake with foot pedal - Adjustable stop on compound rest (feed disengagement) - Splash guard Accessories: - Operating manual - Multifix B quick-change tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Röhm 3-jaw chuck, 200 mm, with turning and boring jaws Weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power. All information is provided without guarantee; errors excepted. All dimensions are approximate. This offer is non-binding. The machine can be inspected upon appointment. Subject to prior sale and changes or errors in technical data, descriptions, and pricing! All prices are net plus VAT. Payment via advance bank transfer, including any freight costs, within 14 days after conclusion of contract. If payment is not received in full within this period, the seller reserves the right to cancel the purchase contract. Sale exclusively to businesses within the meaning of § 14 BGB. The machine is sold with exclusion of any liability for material defects. This exclusion does not apply to claims for damages arising from material defects, which are based on grossly negligent or intentional breach of duty by the seller or its agents, as well as in case of injury to life, body, or health. Any existing claims against third parties for material defect liability are assigned to the buyer. Please understand that I do not assume liability for compliance with any applicable or generally required safety regulations with regard to the sold machine or its components. Such compliance is the responsibility of the end operator. All contracts entered into with me are governed exclusively by the laws of the Federal Republic of Germany, to the exclusion of the UN Convention on Contracts for the International Sale of Goods (CISG). Place of jurisdiction is agreed to be Mannheim.