Used Rotary Kiln for sale (4,081)

Condition: ready for operation (used), Manufacturer: H&G Hedjzp Ilqepfx Aqtsu Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW

Condition: used, Year of construction: 2010, table diameter 1000 mm table load 0,5 t table height 300 mm total power requirement 12 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 1,2 x 0,3 m Hedoznndkspfx Aqtsu Permamantly rotationg table,adjustable in speed. Basic of table has a diameter of 570 mm. Table diameter increased to 1000 mm. Table was mounted on a surface ginding machine. Table will be delivered with a new spare motor.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 32/5, Rotary screen S = 1.5 P = 0.55 kW N = 9 rpm Hedpfx Aqjztxw Ssteu Weight: 450 kg Dimensions: 630 x 1500

Condition: used, table diameter 630 mm weight of the machine ca. ca, 0,35 t Hodpfx Aqoymf U Eetju table height 220 mm

Condition: used, Overall height: 3050 mm Boom height: 2500 mm Boom length: 3050 mm Boom effective length: 2700 mm Hsdpfx Aoyq Nkxjqtsu Load capacity: 250 kg Lifting height: 2200 mm

Condition: used, Overall height: 4050 mm Boom height: 3150 mm Hjdoyq Nnwjpfx Aqtsu Boom length: 4300 mm Boom effective length: 3800 mm Load capacity: 1000 kg Lifting height: 3200 mm

Condition: good (used), Probat HDF 100 rotary valve overall dimensions: 140 cm long, 45 cm wide, 55 cm high. Inlet opening: 46 cm x 9.5 cm. Weight: 270 kg. Hodpfewgl A Dox Aqteu

Condition: good (used), Year of construction: 2005, Offer 25238 Technical Data: - Max. load capacity with horizontal table top: 350 kg Hsdpfxswzigce Aqteu - Max. load capacity in all inclined positions: 300 kg - Faceplate diameter: 400 mm - Through hole / hollow shaft: 125 mm - Faceplate manually tiltable left + right: 0 - 90° - Rotational speed infinitely variable: approx. 0.15 - 5.0 rpm - Right and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Drive: 400 V - Table height in horizontal position: approx. 900 mm - Required space: approx. W 1150 x H 900 x D 800 mm - Weight: approx. 290 kg - Chuck: 250 mm

Year of construction: 1989, condition: good (used), For sale is a fully functional welding positioner from APS. Hedpfx Aecl Ttvoqteu Model 1000 E Year of manufacture: 1989 Machine number: H1-008 Speed range: 0.3-1 rpm 64mm hollow shaft Tilts left and right approximately 135° Space requirement: approximately 1700x1700mm Weight: 750kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 5028830, Offer 26070 Hodpfx Aoyrfxbeqteu Technical Data: - Max. load capacity in horizontal position: 7500 kg - Faceplate dimensions: 1500 x 1500 mm - Motorized tilting of the faceplate: 0 – 120° - Rotational movement electrically adjustable, stepless: 0.0028 – 1.04 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V x 25 kW - Table height in horizontal position: approx. 1600 mm - Handheld remote control - Required space approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 250 kg, warranty duration: 12 months, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, The SITEC ITVP500 is a tilting lathe with 1 axis, controlled by a Numerical Control system, designed for circumferential TIG and MIG welding of cylindrical stainless steel components. The machine guarantees high precision, repeatability, and ease of use, making it ideal for industrial production and high-quality machining. Hedpfx Aszlig Ujqteu Key features: Maximum workpiece diameter: Ø 500 mm Maximum workpiece length: 500 mm Maximum load capacity: 100 kg Tailstock travel: 150 mm Workable material: Stainless steel Welding processes: TIG / MIG Variable speed spindle rotation: 0.1 – 12 rpm CNC Numerical Control with integrated PLC Programming and storage of welding cycles Pneumatic tailstock with two-hand closing system Torch adjustment slides for precise positioning on the joint High-rigidity, electrically welded steel structure Prepared for remote assistance and network connection Advantages: High welding precision Reduced setup times Simple and intuitive programming High repeatability of production cycles Ideal for series production and contract manufacturing Applications: The machine is suitable for circumferential welding of pipes, fittings, flanges, bottoms, manifolds, tanks, stainless steel components, and cylindrical parts for the food, pharmaceutical, plant engineering, chemical, and energy sectors. Customization: The machine can be configured with numerous optional features and accessories (motorized slides, AVC sensors, cold wire feed, brushless motors, rotary joints, cooling systems, and other dedicated solutions) to adapt to the specific production requirements of the customer. For further information, photographs, demonstration videos, and available configurations, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Hedpfx Aqorkmaaoteu Technical data: - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Hjdpfxeu Tln Ne Aqtsu Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Year of construction: 2019, condition: ready for operation (used), A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible. Hsdpfx Aqowtg Hqjteu

Year of construction: 2013, condition: ready for operation (used), A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible. Hsdoyrtayopfx Aqteu

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Hsdpfxevzub He Aqtju Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: used, Used Heidolph model Laborota 20 S (nowdays Hei-VAP) large scale rotary evaporator: - Glassware set A2C: includes one ascending, one descending condenser and one expansion vessel, one 20-l evaporating flask, two 10-l receiving flasks. - Speed of rotation: 6 - 160 rpm. - Stainless steel heating bath: 0 - 100°C (water) or 0-180°C (oil), 400 mm diameter with float switch and automatic inlet valve. Hedpfx Ajw R Uafoqtju - Power: 4000 W. - Timer: 0 - 99:59 hours. - Includes: Base cart, control panel, guard hood, rotation axis locking. - Dimensions: 970 mm x 620 mm x 1600 (height) mm. - Weight: 120 kg (withouth glassware set).

Condition: used, Overall height: 4050 mm Boom height: 3150 mm Boom length: 4050 mm Boom effective length: 3600 mm Hsdpfxeyq Nm Ho Aqtju Load capacity: 1000 kg Lifting height: 3200 mm

Condition: used, Overall height: 4050 mm Boom height: 3100 mm Boom length: 4300 mm Boom effective length: 3800 mm Load capacity: 1000 kg Hedpfjyq Nqfox Aqteu Lifting height: 3200 mm

Condition: new, functionality: fully functional, NEW Rotary table surface grinder available in the UK. With up to a 400mm grinding diameter on this rotary table, vertical spindle surface grinder from Italian manufacturer DELTA, a leading surface grinder manufacturer with over 20,000 units sold worldwide. The rotating table is controlled by asynchronous three-phase bipolar motors with 8/16 poles; thanks to these motors, the table can rotate at a speed of 40 rpm and at a rate of 30 rpm. Delta Rotary surface grinder Maximum grindable surface 400mm Ø Hsdsnziakjpfx Aqtju Distance between column and wheel axis 315mm Max. distance between magnetic table and wheel 205mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0,01mm Size of cup wheel 200 x 80 x 78mm Ø Size of abrasive segments 50 x 20 x 90mm Motor power of the wheel (4 HP)-3 kW RPM of the wheel (50 Hz) 2840rpm/min Electropump motor power (0,08 HP)-0,06 kW Mass of the machine 680kg Rotary table surface grinder Standard Equipment Low tension electric system (24V). Cooling system with electropump Wheel-holder flange and grinding wheel. Grinding wheel guard Table guard.- Stakes key Instruction book/testing certificate Two colour painting RAL 5018-7032, bicomponent multicoat of paint CE conformity certificate with respect to the Units Directive CEE 89/392 and subsequent modifications Stock machine complete with Automatic Downfeed control

Condition: used, Rotary Airlock Feeder, Rotary Feeder – Used Machine Overall Dimensions: Width: 1780 mm Depth: 410 mm Height: 620 mm Hjdjzqatvspfx Aqteu Pocket Size: 220 × 100 × 120 mm Number of Pockets: 8 Electrical Specifications: Voltage: 400 V Power: 0.75 kW Current: 2.1 A

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT Bus CNC System, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: 6kW Fiber Laser Source, laser power: 6,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 8 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, workpiece weight (max.): 1,000 kg, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 9,000 kg, total length: 9,000 mm, total width: 3,400 mm, total height: 2,350 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, # Metal Technics Polska MTP-FL3015R-6KW Enclosed Fiber Laser with Rotary Axis Manufacturer: Metal Technics Polska Model: MTP-FL3015R-6KW Condition: Brand New / Factory New Laser Power: 6kW (6000W MAX Photonics Fiber Laser) Control System: FSCUT Bus CNC Control System Laser Head: Ospri Intelligent Autofocus Cutting Head Working Area (Sheets): 1500 x 3000 mm Tube Processing: 6000 mm length | Round: Fi 20–220 mm | Square: 20x20 to 220x220 mm --- 1. OVERVIEW & CAPABILITIES The MTP-FL3015R-6KW is an industrial fiber laser engineered for high-speed, high-precision processing of sheet metal and structural tubing. Built for demanding production environments across Europe, it combines flat sheet cutting and a 6m pipe rotary axis on a single heavy-duty machine bed. Material Cutting Thickness (6kW): - Carbon Steel: up to 25 mm (O2/N2) - Stainless Steel: up to 16 mm (N2) - Aluminum: up to 14 mm (N2/Air) - Brass: up to 10 mm (N2) Hsdpfxoztx Dre Aqteu --- 2. CORE CONFIGURATION - Laser Source: 6kW MAX Photonics (high photoelectric efficiency, 100k+ hrs life) - Cutting Head: Ospri with dynamic autofocus & thermal-protected water-cooled optics - CNC Software: FSCUT Bus CNC with integrated automatic nesting, fly-cutting & leapfrog motion - Drives & Motion: Inovance bus servo motors & Techmech precision planetary reducers - Transmission: High-precision linear guide rails & helical rack & pinion - Gas Regulation: Aventics proportional valve for automated O2 pressure control - Chiller Unit: Tongfei dual-circuit industrial water chiller - Safety & Fumes: Full protection enclosure with access interlocks + partitioned zone dust & smoke exhaust --- 3. MACHINE DIMENSIONS & TRANSPORT LOGISTICS Assembled Working Footprint: - Length: ~9,000 mm (Main cabin + 6,000 mm rotary bed extension) - Width: ~3,400 mm (Main cabin + electrical cabinet + chuck overhang) - Height: ~2,350 mm - Total Weight: ~9,000 kg Transport / Shipping Dimensions (Dismantled for Mega-Trailer / Container): - Main Machine Bed Unit: ~4,500 x 2,250 x 1,950 mm - Rotary Axis Bed Extension: ~6,200 x 850 x 1,200 mm - Ancillary Skid & Enclosure Panels: Standard crated pallets - Required Gateway/Door Access at Buyer Site: Min. 2,500 (W) x 2,200 (H) mm --- 4. EUROPEAN DELIVERY, WARRANTY & SERVICE - Delivery: Professional logistics arranged across all EU countries & mainland destinations. - Free Installation & Commissioning: On-site leveling, assembly, optical alignment, and software integration performed by Metal Technics Polska field service engineers. - Free Operator Training: Hands-on technical training for machine operators and programmers (software nesting, CNC operation, parameter tuning). - Warranty: 12-month full warranty on all mechanical, electronic, and optical component parts. - Service Support: Direct factory technical support, rapid spare parts dispatch, remote online diagnostics, and complete post-warranty service programs provided directly by Metal Technics Polska. Power Supply: 3-Phase 380V / 50Hz Branding: Custom Metal Technics Polska (MTP) industrial colors & livery.

Condition: excellent (used), functionality: fully functional, rotary table diameter: 310 mm, The TR310 is a dual-axis tilting rotary table that provides maximum rigidity and accurate performance for 3+2 and full 5-axis machining of medium to large parts. Scale feedback on the A (tilting) axis improves positioning accuracy and repeatability. Hedpeztakaefx Aqtou Add 4- and 5-axis capabilities to your machine. Easy plug-and-play connection to Haas machines. Industry-leading performance and capabilities. Heavy-duty design.

Year of construction: 2020, condition: good (used), functionality: fully functional, DESCRIPTION/FEATURES: 5-color offset printing press for labels, with an inline flexo unit and die-cutting. The machine is equipped with: • Unwinding unit • BST web guide • UV LED drying (5) • Turning bar • Offset units: 5 • Flexographic unit Hjdpfszrxdpjx Aqteu • BST registration camera • Automatic washing system • for ink rollers • Automatic plate loading system • Semi-rotary die-cutting unit with magnetic cylinder • Rewinding unit with slitting (blades) • (shearing) • Inking console + CIP 3 for automatic color adjustment • Cooling unit for ink fountains • CCD plate punching table • Automatic registration

Condition: good (used), Poma LS 1300 rotary bookbinding shears Production in Germany. Shears in good condition, ready for production. The construction made entirely of cast iron ensures rigidity and repeatability of cutting. Hedpfxoztn S Se Aqteu Cutting width approx. 1300mm Ideal for bookbinding cardboard. Side margin. The machine has a feeder. 8 sets of knives Weight 1500kg