Used Roller Mill for sale (17,401)

Condition: ready for operation (used), Pitch: 20 mm Thread length: 2330 mm Thread Ø: 38 mm Nodpfxsd Atq Eo Ahvekw Nut length: 130 mm

Year of construction: 1988, condition: used, machine/vehicle number: 82053, table mounting size: 600 x 1100 mm movement x: 800 mm Nodsxnp Dspfx Ahvekw movement y: 450 mm movement z: 500 mm tailstock stroke: von Hand ca. 50 mm spindle turning speed range: 63 - 3150 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x/y/z 4,5/2,6/3 m/min electrical connection: 380 V, 5,5 kW space needed: 3000 x 2500 x 2030 mm weight: ca. 4000 kg control 432 with graphic

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min Nsdpfx Aho H I Hdsvskw rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Condition: ready for operation (used), Pitch: 10 mm Thread length: 1165 mm thread Ø: 30 mm spindle nut mounting: 28 x 49 mm Ø Total length of spindle: 2170 mm Nodpsd Atq Tofx Ahvekw

Condition: ready for operation (used), table mounting size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle taper: ISA 40 spindle turning speed range: 40 - 1800 rpm Nsdjuriuxspfx Ahvjkw carriages longitudinal and cross: 16 - 6630 mm/min carriages vertical: 5,6 - 224 mm/min electrical connection: 380 V, 7,5 kVA space needed: 2100 x 2000 x 2150 mm weight: 2400 kg

Condition: ready for operation (used), Length: 2100 mm Width: 285 mm Nkedpfovf Dpuox Ahvjw 5 rollers: 240 x 32 mm Ø on 2 tubular stands with square feet, 1000 mm high

Condition: ready for operation (used), Total length: 4950 mm 50 rolls, 290 x 50 mm Ø One side widening with support: 230 x 80 mm high The other side support with dotted measuring tape: 3000 mm Nksdpfevf Dqfsx Ahvew lying on 5 double stands, 870 mm high

Condition: ready for operation (used), Year of construction: 1978, machine/vehicle number: 32392, table mounting size: 560 x 240 mm x-axis: 300 mm y-axis: 275 mm z-axis: 200 mm spindle retainer: ISO 40 spindle rotations: 40 - 2000 rpm operating voltage: 380 V Nkjdpfx Ajd Tfcishvsw total energy requirement: 1,5 kW space needed: 1200 x 1100 x 1700 mm weight: ca. 750 kg

Condition: ready for operation (used), Length: 2010 mm Width: 210 mm 8 rollers mounted on L-bar, 50 mm Roller diameter: 48 x 190 mm Nodpfx Aevf Dphohvekw on square tube stand: 30 x 30 x 960 mm high

Condition: ready for operation (used), 7 rolls, width: 300 mm Required space: 1530 x 380 x 530 - 550 mm Nsdpfjixzzkjx Ahvskw

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 12024, table mounting size: 290 x 1250 mm table movement x: 800 mm table movement y: 360 mm table movement z: 450 mm milling head swivelling by: 90/45 ° spindle taper: ISA 40 spindle turning taper: 56 - 4500 rpm tailstock stroke: 125 mm tailstock carriages: 0,035; 0,14; 0,7 mm/min Nsdpfjf Tc R Uox Ahvokw spindle drive: 1,8/2,4 kW space needed: 2000 x 1900 x 2300 mm weight: 1700 kg

Condition: excellent (used), machine/vehicle number: 28652, table mounting size: 250 x 800 mm x-axis: 400 mm y-axis: 175 mm z-axis: 450 mm Nkodpfx Ajh D Rzuohvsw spindle retainer: ISO 30 spindle rotations: 50-2000/50-3400 rpm operating voltage: 380 V total energy requirement: ca. 2,5 kVA kW space needed: 1200 x 1000 x 1600 mm weight: ca. 1100 kg

Condition: ready for operation (used), machine/vehicle number: 1124, table mounting size: 300 x 1300 mm table movement x: 950 mm table movement y: 220 mm table movement z: 400 mm spindle taper horizontal: MK 4 spindle turning speed range: 25 - 1250 rpm Nsdpfx Ahod H Ilrsvokw carriages longitudinal and cross: 7,5 - 635 mm/min carriages vertical: 3 - 250 mm/min electrical connection: 380 V, 4 kW space needed: 1670 x 1500 x 1580 mm weight: 2600 kg

Year of construction: 1972, condition: excellent (used), machine/vehicle number: 2995, table mounting size: 300 x 1100 mm movement x: 780 mm movement y: 250 mm movement z: 410 mm spindle taper: SK 40 tailstock stroke: 100 mm spindle turning speed range: 31,5 - 1400 rpm carriages longitudinal and cross: 12,5 - 630 mm/min carriages vertical: 6,3 - 315 mm/min Nsdsh I Du Ujpfx Ahvokw electrical connection: 380 V, 5,5 kW space needed: 1770 x 1500 x 2050 mm weight: ca. 2200 kg

Year of construction: 1990, condition: ready for operation (used), machine/vehicle number: 350119, table mounting size: 350 x 700 mm Nkodpogq Dclofx Ahvjw x-axis: 500 mm y-axis: 320 mm z-axis: 400 mm spindle retainer: SK 40 spindle rotations: 30 - 2500 rpm operating voltage: 380 V total energy requirement: 2,2 kW space needed: 1500 x 1500 x 1800 mm weight: ca. 1700 kg

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Nkedsghl Emepfx Ahvow Saw blade speed: 2700 rpm Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg

Condition: used, Lot consists of: (1) universal milling machine Nodpfx Aoylacbshvskw

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) Nkedpfxox E Dnco Ahvew - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Year of construction: 1989, condition: excellent (used), Coming up for sale: 1 used clamping / boring mill table Manufacturer: Skoda Type: E20OB22875 year: 1989 dimensions 2.000 x 2.000 mm part weight: up to 25t electr. adjustable mass: 10t Nedpfx Aog Sbbmohvjkw

Condition: good (used), for sale: several used clamping brackets / boring mill brackets 1500 to 1800mm wide 2500mm high 1250mm deep Nksdpfx Ahog Sbbxovow Mass: 5,8t Load capacity 60t 6 pieces available partly with stairs

Condition: good (used), Year of construction: 1980, For sale: 1 piece milling machine Manufacturer: Kunzmann Type: HF6/2V YEAR OF MANUFACTURE: 1980 For speeds see type plate Table: 700 x 170mm Machine can be inspected in our warehouse in 09599 Freiberg. Nedpoq Rfqbefx Ahvskw

Condition: good (used), Polar Mohr RA-4 Jogger with Roller and Scale The machine is ready for operation, after inspection. This is the latest design from a German manufacturer. Nkedpfxjywdnaj Ahvsw Technical specifications: Maximum format: B1+ Stack height: 150mm Weight: 550kg (shaft) + 250kg (scale) Power supply: 400V Air-squeezing shaft Air table Right/left shaking option Tilt angle adjustment Shaking frequency adjustment (inverter) Squeezing shaft force and speed adjustment. Chrome-plated table surface The machine is also equipped with a Bizerba sheet weighing system, which allows for counting, taring, batching, and more.

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Njdpex I Sh Aofx Ahvekw Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: used, Year of construction: 2022, x-travel 1.650 mm y-travel 850 mm z-travel 900 mm Control Heidenhain TNC 640 spindle tunring speed 6.000 U/min power capacity 37 / 20 kW Torque (40/100%): 824 / 549 Nm tool taper SK 50 number of tool places 24 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant supply - Table cleaning system - Infrared workpiece measurement, Heidenhein TS-460 with breakage monitoring - 4th axis, Tsudakoma RWA-250L-SM - Three-jaw chuck Ø250 mm Nedpfx Aeykb Ipehvekw - Extraction system - 2-stage gearbox - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2001, x-travel 2.000 mm y-travel 1.200 mm z-travel 1.400 mm Control Heidenhain 426 spindle tunring speed 3.000 U/min tool taper SK 50 number of tool places 20 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Nksdpfx Aoxu Nxvohvew Technical Features & Accessories: - Controlled rotary table - Milling head with stepless positioning along the B-axis - Automatic tool changer with 20 magazine positions - 2x chip conveyors in longitudinal direction, ejection on the left - Coolant system - Fully enclosed - Various tools Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!