Used Robot Machine for sale (92,411)

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Lsdpfx Absxni Iqe Ushn Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type

Condition: excellent (used), Year of construction: 2014, XYZ 1020 Vertical Machining Centre Siemens 828D Control Manufactured & Installed in 2012 24 Station Too Carousel 8k Spindle Machine Capacity: Table Size: 1120 x 500 X Axis Travel 1020mm Y Axis Travel 520mm Z Axis Travel 540mm Rapid Traverses 20,000m/min Spindle: Spindle Speeds – 8,000ppm Tool Shank ISO40 Tool Storage Capacity 24 Tools Spindle Power 20Hp For sale with Jet Machinery Ltd Machine Serial Number: SMU00143 Cost: £27,500.00 + VAT Ledpexndrdsfx Ab Ushn Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: excellent (used), functionality: fully functional, fuel type: electric, overall weight: 1,000 kg, operation weight: 575 kg, lifting height: 3,600 mm, Lifter, manipulator for glass, windows, plates Smartlift lifting capacity 575kg remote control - electric drive - side shift - control from a remote control on a cable - pressure indicators - 24V power supply (two batteries) - rough terrain trolley - max lifting capacity 575kg - range in the photo - one electric extension - fully working / video on whatsapp Lodpfx Asxndqteb Uohn - electric rotation The machine is located in Poland - 33350. On-site inspection is available by appointment. Our company is located 120 km from Krakow Airport (KRK). transport possible External length 1,880 mm External width 890 mm Dependent weight 1,025 / 1,300 kg Max. lifting capacity 575 kg Max. load at maximum extension 275 kg Minimum extension (center of drive wheel to suction plates) 700 mm Max. extension (center of drive wheel to suction plates) 1,800 mm Max. height to center of lifting bracket 3,600 mm Lateral offset 100 mm Fine lifting function in the tower 200 mm Swivel 180 degrees Hydraulic rotation 180 degrees Suction plates 4 x Ø 350 mm Batteries

Condition: new, functionality: fully functional, Year of construction: 2025, BPM-120 CRACK SEALING MACHINE TICAB LLC (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces: the BPM-120 crack and joint sealing machine. Main Application: The BPM-120 fills cracks and joints on asphalt roads, parking lots, sidewalks, airfields, and other road infrastructure facilities. Designed for small- and medium-scale projects! BPM-120 Technical Specifications: • Bitumen emulsion tank: 120 liters • Bitumen pump: capacity up to 10 l/min, working pressure up to 5 bar • Feed system: manual spray wand + 2 m hose (non-heated) Ljdjvrialepfx Ab Ushn • Mixing: manual • Bitumen heating system: diesel burner • Temperature control: automatic (maintains preset temperature) • Purge system: allows cleaning of hose and spray wand after work is completed Thoughtful design for your comfort and safety! Advantages of the BPM-120 model: • Compact size and mobility • Easy to maintain and operate • Direct heating with diesel fuel (no oil layer) • Energy-efficient fuel consumption • High-quality crack and joint sealing ensures pavement durability • Simple construction guarantees reliability in operation Price: • €13,000 without trailer • €15,200 with trailer Delivery Terms: • Production time: up to 20 business days after order confirmation • Warranty: 12 months • Delivery: from the manufacturer’s warehouse • Support: manual, technical assistance, video instructions Contact us today for a personalized consultation! Choose equipment that delivers results — send your inquiry now!

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Lhedpfxsxmhx Eo Ab Ujn Adjustable pellet length: 10-30 mm. Engine power: 22 kW. Dimensions: 1400 mm x 1000 mm x 1200 mm. Weight: 750 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, 3 Station Extruder Machine 1100 M2 Coex Unit 2 stations are operating Corona unit Non-stop big size winder-unwinder 2 station coex, one station mono extruder Lsdpfx Asxl Ucbeb Ushn

Condition: new, functionality: fully functional, feed length X-axis: 510 mm, feed length Y-axis: 510 mm, feed length Z-axis: 510 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, 📄 Product Description The Tongtai SH-4000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. Ledpfx Absxnizde Uohn It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 510/510/510mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Pallet size: 2 x (400x400mm) Maximum load on the table (pallet): 2 x 400kgs Maximum workpiece dimension (diameter x height): Ø 550 x H 800mm Spindle speed: 15.000 rpm Built in spindle motor: 18.5/26/37 kW Machine size (Width x Depth x Height): 1.750x5.060x2.720mm Machine weight: 8.700kgs Fanuc controller model 0i-MF with Manual guide i and 10,4''LCD monitor Tool shank: BBT-40 ATC with 60 tools CTS ( coolant through spindle): 70bar Chip Conveyor integrated type with trolley Oil Skimmer

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, warranty duration: 6 months, The equipment has been checked by an authorized service center and is ready for operation. We provide a 6-month warranty. The CEA CONVEX 405 Pulse Premium is a high-quality MIG/MAG welding power source equipped with advanced pulse and double-pulse technology. Designed for professional and industrial applications, this Italian-made welder ensures excellent weld quality, easy setup with synergic programs, and maximum versatility. The unit is used but fully tested and in good working condition, ready for immediate operation. ⚙️ Technical Specifications Model: CONVEX 405 Pulse Premium Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A {eta} 60% / 320 A {eta} 100% Power supply: 3~ 400 V, 50/60 Hz Welding processes: MIG/MAG, Pulse, Double Pulse, MMA, TIG Lift Lhjdpfx Aboxl Drlj Ujn Control panel: synergic with memory programs and digital display Wire diameters: 0.8 – 1.6 mm (steel, stainless steel, aluminium) Cooling system: air or optional water cooling (depending on configuration) Weight: approx. 120–140 kg ✅ Key Features Pulse & Double Pulse modes – ideal for aluminium and stainless steel. Synergic programs – quick and precise parameter adjustment. Supports multiple processes: MIG/MAG, MMA, TIG Lift. Stable arc and excellent weld appearance even on thin materials. CEA – Italian technology renowned for quality and reliability. Used but checked and ready for work.

Condition: good (used), Robot Coupe mobile universal machine, type: R40B, serial number: 61/0I39, 340 V, inside dimensions: Ø 360 mm x 350 mm, total dimensions: 900 mm x 650 mm x 1250 mm. Lhodeup Dbzopfx Ab Uen With spare parts including an extra blade set.

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Ledswtnxnopfx Ab Ushn Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Lhjdpoxliguofx Ab Uen Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Lhedpjxftqdefx Ab Usn Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. Lhodpfx Absxdmgvs Ujn The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Lhodexg Tfqjpfx Ab Uen

Condition: used, Sharpening machine for circular saws/rip saws IDL000829 - manufacturer: IMW Lhodpfxovlczve Ab Uen

Year of construction: 2019, condition: used, The EFD machine we are offering has a capacity of 2000 mm, but once the MF and HF adaptation boxes are installed, this travel is limited to approximately 1700 mm. It is equipped with a Siemens 840 D CNC (replaced 3 months ago), with 3 digitized axes: Z, Y (200 mm), and C, a double spindle with dual tailstock controlled separately, 1 MF adaptation box, and 1 HF adaptation box. The machine height is 4400 mm. The maximum workpiece weight on the main spindle is 600 kg. The maximum weight per piece on the double spindle is 50 kg. The converter is transistor-type, with a power output of 300 kW and equipped with three frequency ranges: 100 kHz at 200 kW, 3 kHz and 10 kHz at 300 kW. Parameter monitoring is integrated into the Siemens 840 D CNC. It will control: voltage, current, power, MF or HF frequency, quench flow rate by analog flowmeter, quench water temperature via PT 100 probe, with a color printer included. Optionally, a serial link is available, allowing program transfer to avoid dual programming for the CNC and the RTM 100. SUPPLIED EQUIPMENT: - 1 galvanic isolation mains transformer, 400 V three-phase + earth (for network disturbance protection and operator safety) - 1 SINAC P M/H transistor converter Power: 20 to 300 kW Frequency: 3 to 100 kHz - 1 medium frequency adaptation box with 55 VT 8 transformer 1 capacitor bank for 3 kHz 1 capacitor bank for 10 kHz - 1 high frequency adaptation box without transformer 1 capacitor bank for 100 kHz - 1 manual selector switch for 3 and 10 kHz selection - 1 manual selector switch for 100 kHz or 3/10 kHz selection - 1 standard vertical traversing hardening machine, type HGL 2000, 3-AXIS, equipped with: - 1 SIEMENS 840 D controller (replaced 3 months ago) - 1 X-axis, vertical travel approx. 1500 mm depending on MF and HF adaptation boxes - 1 Y-axis, horizontal travel 200 mm - 1 C-axis spindle rotation, max workpiece weight 600 kg, max diameter 500 mm (according to inductor) - 1 double spindle with dual tailstock - 1 hydraulic circuit with analog flowmeter for quench water - 1 second hydraulic quench water circuit without flowmeter, solenoid valve controlled by program, no flowmeter supplied - 1 simple interface for high frequency inductor connection - 1 simple interface for medium frequency inductor connection - 1 operator access door - Integrated RTM 100 standard process monitoring system in the Siemens 840 D, with color printer - All necessary electrical interconnections for medium, high frequency, and low voltage - Complete documentation in French (user and operating manuals) This installation is highly versatile due to its wide frequency range (low, medium, and high), all provided by a single generator, making it rare on the market. Lhjdpoxc Exhsfx Ab Uon The high power rating of 300 kW enables the processing of large or two workpieces simultaneously.

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Ledpfx Asxlfwpob Uohn Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2024, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 250-350 kg/hour depending on the raw material. Pellet diameter: 4mm or 8 mm (depending on the chosen sticker). Sticker diameter: 250 mm. Adjustable pellet length: 10-30 mm. Engine power: 15kW. Dimensions: 1400 mm x 1000 mm x 1200 mm. Weight: 550 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. The density of the granules is no more than 1250/m3. Ledpfx Asxf Nxdeb Uehn It is located locally in Vacegres (EU), Hungary.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Ljdpfx Aoxghngsb Uehn Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Isobaric Filling with Double Vacuum The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Electrical Characteristics and Compatibility Ledow Tlz Espfx Ab Ujhn The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.

Condition: excellent (used), Year of construction: 2018, turning diameter: 560 mm, spindle speed (min.): 1,800 rpm, turning length: 3,000 mm, XYZ Proturn SLX555 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2018) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2018 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 6340kg Supplied with: 3 Jaw Chuck 4 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders Fixed Steady Interlocking Guards Auto Lubrication. Coolant. Worklight Tooling as Photographed Lhjdpfjxc Nmijx Ab Uen We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79000 Machine Serial Number: SLM00083 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2021, operating hours: 250 h, functionality: fully functional, overall weight: 2,000 kg, total length: 3,500 mm, total width: 1,800 mm, total height: 2,100 mm, type of input current: three-phase, CNC Milling Machine for Sale Due to Retirement. Description For sale: CNC milling and cutting machine. Specifications: - Year: 09/11/2021 - Working table dimensions: 1500 x 3000 mm - Automatic tool changer - 9000W air-cooled spindle - 8-tool linear magazine - 4-zone vacuum table with pneumatic stops - 7500W 380V vacuum pump - 2-bag chip vacuum extractor, 1500W 220V - Compressor - Z-axis travel: 200mm (X: 3000mm, Y: 1500mm) Lhsdjxcvzmspfx Ab Uon - Yaskawa 750W servo motors on X, Y, and Z axes - Cutting tools (carbide, diamond) - Various additional equipment - Spare parts kit - Control station with computer - Software included: - TopSolid (expandable for design and drafting) - CamBam (programming) - Opticoupe (cutting optimization) Vanloisir is a van conversion company based in Charente-Maritime, operating for over 11 years. Due to retirement, we have decided to sell our CNC machine, along with all software (TopSolid) and accessories. We are offering the complete package for €14,000. For an additional fee, training for the machine's operation can also be arranged.

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Lhedpfxoxiv Ugo Ab Uon Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: G01747, Turning diameter over bed : 500 mm Turning diameter over slide : 280 mm Workpiece length : 2000 mm X-axis travel range : 280 mm Z axis travel range : 1935 mm Rotation speed : 3000 rpm/min Spindle tip : A2-8 Spindle flight : 82mm X / Z accelerated feed : 4/6 m/min Ljdpfevfdiujx Ab Uohn Tailstock sleeve diameter : 75 mm Tailstock taper : MT5 Main spindle motor : 11/15 kW Tool shank size : 25x25 mm Tailstock step : 150 mm Positioning accuracy of the X/Z axis (C, Y) : 0,018/0,021 mm Repeatability accuracy of the X/Z axis (C, Y) : 0,014 mm Weight : 2800 kg

Condition: new, AB-1510DEX Lhodpfxeu Tgwfj Ab Uon Range 1500mm Lifting capacity: 6KG Supply voltage: 220v ±10%,1 phase, 50 Hz Source: AOTAI MAG-350RL (350A , Supply voltage: 380v ±10%, 3 phase, 50 Hz) After-sales and warranty service begins with the delivery of machine to the Buyer (consumable parts are not included in the warranty). Warranty period: (a) robot with controller - 12 months, b) welding source - 12 months, c) remote control (without screen) - 3 months.