Used Roberine 1503 for sale (78)

Condition: ready for operation (used), Indramat KDA 3.3-150-3-A00-W1 AC main spindle drive MNR: R911257443 SN:256355-02941, used, normal signs of wear, 100% functional, scope of delivery as per photos. Ltjdpox Dw Haofx Affja

Condition: used, Year of construction: 2002, SEW Movitrac Frequenzumrichter 31C011-503-4-00 RA1284 Lodpfsk Abqqex Affjta Hersteller: SEW Eurodrive Typ: Movitrac 31C011-503-4-00 Zustand: gebraucht/ geprüft/ voll funktionsfähig Version: 011-503-4-00 Preis: zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed Ledpfxoful Uis Affjta - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt

Condition: new, functionality: fully functional, machine/vehicle number: BT6159PA1124, Year of construction: 2025, load capacity: 1,500 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Pallet truck Chassis number: BT6159PA1124 Load center: 600 Condition: New machine Technical condition: New Front tires type: Polyurethane Front tires condition: New Rear tires type: Polyurethane Lodpfx Aox Ent Ajffsta Rear tires condition: New Battery voltage: 24V Battery capacity: 20Ah Battery type: Lithium-ion Battery condition: New Description: NEW MACHINE

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 150 311, total height: 6,195 mm, ram adjustment: 150 mm, installation height: 600 mm, table height: 1,000 mm, total width: 2,660 mm, total length: 4,340 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 315 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 1,010 mm, distance between side stands: 810 mm, distance between stands: 3,020 mm, overall weight: 76,000 kg, year of last overhaul: 2025, ATTENTION: Machine will be completely mechanically and electrically overhauled before delivery in 2025. Pressing force: 3150 kN Lsdpfx Aswqpgheffota Adjustable stroke: 40 - 200 mm Ram adjustment: 150 mm Strokes per minute: 20 - 100 Tool installation height: 600 mm Table dimensions: 3000 x 1250 mm Ram dimensions: 3000 x 1100 mm New control system SIEMENS S7 1500

Year of construction: 1993, condition: good (used), functionality: fully functional, used REIFENHÄUSER single-screw extruder Ledpopy Eygofx Affota with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Fully functional

Condition: ready for operation (used), Indramat RAC 2.3-150-380-A-00-W1 Spindle Drive , serial no. according to photo ,used, fan missing, small traces of use, 100% functional, scope of delivery according to photos ATTENTION: Please ask for costs of packing and shipping separately! ATT Ltedpfxsi Ebllo Affja

Condition: new, SIMOTICS SD MOTOR TYPE: 1CV3282C Low voltage IEC squirrel cage motor, intrinsically cooled, IP55 Thermal class 155(F) to 130(B) Cast iron housing Basic line Premium Efficiency IE3, 60Hz, P60: IE2 6-pole * Frame size. 280M * 55kW (50Hz) 66kW (60Hz) 3 AC 50Hz 400VD/690VY * 3 AC 60Hz 460VD IM B3 3 PTC thermistors for disconnection (2 terminals) Terminal box top Ltsdpjgpgymofx Affoa

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used 3-meter CNC press brake from Bystronic Model: PR 150 3100 Capacity: 3100 x 150 tons CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2 Cybelec ModEva 12 CNC control Hydraulic upper clamping RFA Hydraulic lower clamping WILA 13 mm Year of manufacture: 2006 Ltedpfx Aoxp Rftjffoa

Year of construction: 2004, condition: excellent (used), Slewing bearings, slewing ring, single-row ball bearing, four-point contact bearing, gear ring, steering ring, -Slewing bearings -Type: Drawing No. 281.30.1200.013.11.1503 -Dimensions: see photos -Dimensions total: Ø 1395 x 90 mm -Transport weight: 240 kg Ltjdpfeiqpx Nex Affea

Condition: good (used), functionality: fully functional, fuel type: diesel, color: yellow, Year of construction: 1997, operating hours: 7,028 h, Product Description Used Komatsu Wheel Loader Manufactured by KOMATSU Model WA150-3 Lsdpsumq Hxsfx Affjta Hours 7003 hr Operates on Diesel Engine Machine as its condition Please contact VIJAY JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Type: RH-241-1-50-30 WE Lodpow Np Tkjfx Affota Grooved feeding zone With manual screen changer Fully functional

Condition: ready for operation (used), Indramat KDA 3.3-150-3-A00-W1 AC main spindle drive SN:256355-01253, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per the photos. Ltjdpfx Aox Dw Hgjffea

Year of construction: 1991, condition: excellent (used), functionality: fully functional, 250kg/h Capacity Gas Heated Kohnle Heat Treatment Line Fully functinal Ltodsxqy Itjpfx Affea Still in operation Line Consisted With : Loading - Gas Heated Hardening Furnace (1991)- Oil Tank - Rare Washing Machine - Loading Unit For Tempering - Electrically Heated Tempering Furnace (Industrial Ofenbau 2007) - Blackning Tank Protection Gas : Nitrogen / Methanol

Condition: new, machine/vehicle number: 068983c41e44eb5660fa9100c, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins X-tra Long, with 15030 mm internal length Outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm Extension ladder at the rear Door retainer at the side 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle Impact protection at the rear Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system AAC Basic, automatic relief axle acting on last axle, as maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights Side lights 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4-fold pockets and with long pocket at the bottom. 3 pairs of stanchion positions Insertion slats 5 rows of wooden slats Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof rail when loading and unloading EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: Front interior height approx. 2900 mm / 2950 mm / 3000 mm, adjusted to approx. 3000 mm Ltsdpfxsi Riwus Affsa Optimum rain strip at the rear, at the top of the end bows,

Condition: like new (used), Technical data: Drive motors/ motor Quantity: 6 pieces available Manufacturer: SEW Movimot Type: MM150-503-00 18215033 condition: used, unused Output: KW 1,5 Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods we are your competent partner! We would be pleased to make you an individual offer or advise you on the conception or installation questions. Just let us know your requirements and the local conditions. Ledpfx Ajf N Hf Seffeta Take advantage of our many years of experience and our excellent network of experts. For companies in a wide range of industries, such as: logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will develop ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available -Dimension: 490/110/H390 mm Ltedpfxoq T T Nps Affea -Weight: 15 kg

Condition: excellent (used), Year of construction: 2014, volume flow: 18.4 m³/h, operating pressure: 8 bar, BOGE S 150 screw compressor 110 KW engine Capacity 18.40 m3/min Pressure 8 bar Year of production 2014 Mileage 18,000 hours Ledpet Au Tbjfx Affjta THE COMPRESSOR IS FULLY FUNCTIONAL.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3 kW (4.08 HP), Coil Cutter SF1503CH 3KW / Laser cutting system with automatic sheet metal feed Further details on request Ledpfjt Huugsx Affsta

Condition: like new (used), Year of construction: 1999, overall weight: 6,000 kg, volume flow: 300 m³/h, input frequency: 50 Hz, rotational speed (max.): 2,950 rpm, 11: Industrial pumps of the KSB brand 1 unused, 3 used KSB centrifugal pump + motor unit LUV h 150-340/2 Product information: Manufacturer: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture: 1968 Origin: Plant Frankenthal (Pfalz), Germany Condition: Used, but in good condition ⚙️ Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Ltsdpowq Shbjfx Affja Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚡ Technical data – Motor: Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 Motor number: 2-151-134 874/1 📦 Description: This industrial high-performance pump from KSB is ideal for transporting large amounts of liquid. The pump is sold together with the matching motor unit. Manufactured to the solid German engineering standards of its time, known for durability and high performance. 2. Pump info: KSB centrifugal pump + motor unit Brand: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture of the pump: 1968 Origin: Plant Frankenthal (Pfalz), Germany 🔧 Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚙️ Technical data – Motor: Type: LUv 5/2 F9 30-605 Motor No: 2-151-134 874/2 Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 📌 Condition: Used, but in good condition. Stored after disassembly from an industrial plant. Technical data has been verified based on the nameplate.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Ltsdpfxorq Hmze Affsa Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: excellent (used), Vötsch VC 7150-3/S Temperature and climate test chamber 1540 liters Ltedpfxephprfs Affsa Vötsch VC 7150-3/S Temperature and climate test chamber Temperature -70°C to +180°C with humidity 10 to 98 Test chamber capacity: 1540 liters Temperature calibration values: +23 to 80 °C Temperature climate test: +10°C to +95°C Dew point temperature range: +4°C to +95°C Test chamber dimensions: Height: 950 mm Depth: 1475 mm Width: 1100 mm Weight: 1130 kg Electrical connection: 400 Volt Rated power: 13.8 kW You can find more items - new and used - in our store! International shipping costs on request!

Condition: refurbished (used), controler for resistance weldingmachines MPS 1033 Lsdpspbby Hsfx Affsta MPS 1036 MPS 15033 MPS 15036 MPS 15043 T 1036 T 5036

Condition: used, Year of construction: 1998, operating hours: 15,030 h, CE mark: yes Serial number: EC200V0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22096 Specifications: 1998 model Hours: 15,030 Weight: 19,300 kg Power: 107 kW Central lubrication system Undercarriage (see photos) Track width: 60 cm Overall width: 290 cm S70 mount above tilt, KM1 below Rototilt from 2004 Narrow bucket Owned for 16 years Climate control / AC Video available Lsdpfx Aex Nl N Aeffjta Ready for delivery   Notes: Broken wire to the rototilt Starts to roll at high speed Hours: 15030 Own weight: 19300 Width: 290 Kw: 107 CE: Yes Model: 1998 Volvo EC200 Beltegraver m/ Rototilt og Smalskuffe

Condition: new, Festo DSL-32-25-270-P-S2-CC swivel linear unit 163100, with 2 shock absorbers YSR-8-8-C / 34571, with 2 proximity switches 150387, unused, 100% functional Ltedpfx Afji D U I Uofea