Used Riveting for sale (106)

Condition: used, Year of construction: 2012, pressure 6 bar voltage 24 V weight of the machine ca. 1,75 t length in total 1500 mm length in width 900 mm Total height 2100 mm Riveting machine, riveting machine from Arnold Shinjo Changes and errors in Bedpfxovduble Ab Tolr the technical data and information as well as prior sale reserved!

Condition: used, Nietmaschine / Riveting machine Hang 162-01 Baujahr / Year 1993  - SN. 39709 Arbeitstiefe (Ausladung) / Working depth (projection) 620mm Taktzeit / Cycle time 0,7sec Niethub / Rivet stroke 55mm Arbeitshöhe / Working height 1100mm Nietschaftsdurchmesser / Rivet Diameter 2-4mm Antriebsleistung / Drive capacity 0,37 kW Geeignet für Verarbeitung von Halbhohlniete, Vollniete, Hohlniete, Rohrniete, Zweispitzniete, Blsdpfx Abov D H Hto Tor Doppelhohlniete (Zuführung des Nietkäppchens), Nietmaschine für mittlere bis große Serien Suitable for processing semi-tubular rivets, solid rivets, hollow rivets, tubular rivets, two-point rivets, double-tubular rivets (feed of the rivet cap), riveting machine for medium to large series Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2007, operating hours: 10 h, machine/vehicle number: 103414, High-performance automatic production line for ring binders. Sheet feeder (vacuum feeder), creasing station, gripping hole punching unit (finger hole eyeletting machine), double riveting station, operator control panel (Fanuc QuickPanel View), mechanical feeding unit, single riveting station, folding station. Cover height: 120 – 400 mm; cover width: 300 – 820 mm; material thickness: min. 1 mm – max. 3.5 mm; rivet spacing: 90 – 300 mm. Bsdpfxsx Apb Hs Ab Tolr

Condition: used, Technical details: shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm working dimensions: 30 mm dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) Bodpfxeu Nfrcs Ab Tjlr - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. *

Condition: new, Year of construction: 2025, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron Bljdpfx Ascnxa Seb Tjr milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: good (used), Hello, -The subject of sale is. -Hang 87D 3P double-head riveter. -Manufacturer: Hang Germany. -Good condition. -The machine is used to rivet eyelets. -Two riveting heads, with adjustable spacing. Blodsv I E Scjpfx Ab Tjr -Cardboard thickness 0.2-4mm -Weight 570kg -380V power supply -Possible transport by freight forwarder (individual valuation)

Condition: ready for operation (used), functionality: fully functional, Buffer storage tank / stratified storage tank made of steel, insulated, standing on feet. Technical data / dimensions Available quantity: 1 Volume: approx. 60,000 liters Tank type: Pressure tank Condition: used Suitable for food: no Design: upright Diameter inside: approx. 2,800 mm Bledpjtwfxlofx Ab Tjr External diameter: approx. 3,000 mm Cylindrical height: approx. 8,880 mm Total height: approx. 10,380 mm Specific weight of the medium: 1.0 to/m³ Operating pressure: Overpressure Operating pressure: 6 bar Test pressure: 7.8 bar Wall thickness underfloor: approx. 12 mm Wall thickness top: approx. 11 mm Wall thickness jacket / cylinder: approx. 8 mm Ground clearance: approx. 300 mm Operating temperature: 60 degrees Celsius Material / composition Material inner casing: steel Feet material: Steel Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Galvanized steel Insulating jacket: screwed/riveted Notes: The insulation and the associated insulation cladding are damaged and may need to be be renewed/replaced. If you are interested, we will be happy to offer for the renewal of the insulation. The underside of the tank is not insulated. Equipment Stand form: Feet Number: 4 Width: approx. 400 mm Length: approx. 400 mm Top shelf type: Dished base Bottom shelf type: dished floor Top shelf: 2 x crane eyes 1 x flange socket DN 25 Jacket: 1 x steel pipe (26.9 x 2.6 mm), pulled down from the top floor 2 x flange DN 125 with internal distributor pipe 6 x immersion sleeves with temperature sensor incl. cable protection tube 2 x crane eyes Underfloor: 1 x outlet flange NW 50, pulled to the front 1 x oval manhole (320 x 420 mm) with insulating cover Documentation: Drawing

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. Blodpfjpfcx Iox Ab Tor with punch rivet pliers 9524-640-826-7 operating voltage: 400V 50 Hz rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 195 kg type: 9524-640-826-7 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, manufacture Tucker Bledpfexwp Nyex Ab Ter Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, BRACKER RN 280 RADIAL RIVERTING MACHINE MAKE BRACKER, MADE IN SWITZERLAND MODEL RN 280 CAPACITY RIVET SHANK DIAMETER OF TENSILE STRENGTH 370N/MM2 1.0 mm – 12.0 mm AIR PRESSURE 14 - 88 PSI MAX. RIVERTING PRESSURE 340 KGS RIVERTING TIME 0.1 – 5.9 SECONDS WORKING STROKE 5.0 mm – 40.0 mm DIVE MOTOR 0.74 HP Bledpfxowh N H Nj Ab Tor POWER REQUIRED 220V 3PH MACHINE WEIGHT 340 KGS MACHINE DIMS L x W x H 1220 x 915 x 1930 mm PLUS BRACKER FOOT TREADLE ACTIVATOR MANUAL HEIGHT ADJUSTMENT OF RADIAL RIVETING HEAD ON DUAL RECTANGULAR WAYS PRESSURE ADJUSTMENT WITH GAUGE

Condition: excellent (used), Year of construction: 2020, color: other, Internal dimensions: 7,300 x 2,472 x 2,550 The aluminum swap body T.SWAU BK, which is on average 750 kg lighter than usual products on the market and therefore enables a larger loading capacity, Talson's innovative self-supporting box construction is manufactured in a special aluminum sandwich design. In addition, modular aluminum side walls are made of 6 separate plates riveted with aluminum omega profiles, which enables cost-effective and quick repairs if necessary. Aluminum has good UV resistance (non-yellowing) and aging resistance and is easy to clean due to its low dirt adhesion. Talson T.SWAU BK is equipped with a robust aluminum Talfix load securing system with multiple holes to enable different wagon loading models in one box. As part of the patented Talfix load securing system, the double deck bar with 1 daN capacity each allows the creation of a second level in the vehicle for maximum load capacity. Talfix® is suitable for double deck applications that allow multi-level loading with 700 kg capacity per 1 m. = More information = Year of manufacture: Jan 2020 GVW: 16.000 kg Dimensions (LxBxH): 7450 x 2530 x 2750 cm Technical condition: very good Visual appearance: very good Registration number: 1078 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices Blsdpfxsuxvbao Ab Tjr - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), Air circulation oil / gas chamber furnace model SOS 80 O Exhibition machine Technical data: Usable space dimensions: Width approx. 1200 mm Height approx.: 1800 mm Depth approx.: 3000 mm trolley on request material Housing inside: Sheet steel 0,8 mm FAL welded or riveted tightly Outside housing: sheet steel 0.8 mm Base plate sheet steel 1.5 mm Painting: RAL 1013, as standard, powder coated Insulation material: Mineral wool Insulation thickness: walls - 160 mm ceiling: up to 240 mm, 100 kg/m3 dense Performance data: Bsdpfec Nbitjx Ab Tolr Heating mode: oil Heating capacity: approx. 80 KW 1 oil burner a' 80 kW Total connected load: approx. 5,4 KW Temperature range: up to 250°C, infinitely variable Changes and errors in the technical data, and prices as well as subject to prior sale.

Year of construction: 2024, condition: ready for operation (used), A nearly unused complete factory for the production of battery housing frames is available. It features the following processes: handling, welding, riveting, Rivtac, screwing, gluing, sealing, measuring and testing. 1) Handling & logistic: component handling, feeding, transfer, positioning, discharge. 2) Riveting & Rivtac: stand riveting, Rivtac joining, fastener inspection. 3) Screw processes: pick & place double screwdriver, simultaneous triple screwdriver, final assembly screwing. 4) Arc welding: large block welding process, welding stations, fourfold clamping concept, rotation devices and trunnion fixations, automatic discharge for NOK. 5) Adhesive & sealer application: brushing & dry cleaning, adhesive application, sealer application, camera inspection and discharge for NOK. 6) Adhesive cleaning & surface preparation: dry tape cleaning and manual tape change. 7) Stud welding, positions: 7. 8) Measuring and testing procedures: geometry measurement before milling with NOK scrap, final measurement, seam inspection, leak test, final inspection, cap installation, leak station, laser marking with NOK scrap procedure. 9) Rework area: robot-supported leak test with sniffing method and 2x manual rework stations. The factory was hardly used and only approximately 1000 components were produced with it. Documentation available. An on-site inspection is possible. Bodsxwn Izepfx Ab Telr

Condition: excellent (used), Here we offer you a ToX full punched rivet system. ToX full punched rivet system type TZ-VSN The full punch rivet severed all joining and pushes the slug from the joint. TOX PRESSOTECHNIK, supplemented with innovative technology for full self-piercing rivets the specialist for sheet metal connections, his delivery and performance program is a pioneering procedure. The full punch riveting offers an additional mechanical connection of sheet metal, This is for lightweight construction and the combination of hybrid parts and assemblies of great importance. The rivet advancements, forceps, and toolholders are also so universally designed, that full punching rivets with a diameter of 4.0 mm and lengths between 3.3 and 8.1 mm as well as full punching rivets with a diameter of 5.0 mm and lengths between 3.9 and 9.0 mm with TOX - hand pliers as well as with TOX robot pliers flexible can be processed. Type TZ-VSN Pressing force 55KN Bledpfsdz Afwex Ab Ter Total stroke 140 mm Rivet type: Diameter 5 x 4, 6 Connection values Performance: 3,4KW Power supply: 400/15/50-60 V / A / Hz Speed: 200mm / s Web form: 3 p + N + PE Control voltage: 24 V DC Back-up fuse: 25 A Type: TZ-VSN Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm - 1 pc. Y-piece with gasket, 45°, length 800mm - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm Bodpfexv Akzjx Ab Telr - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Condition: not inspected (used), Year of construction: 1999, Built by ECKOLD as a special-purpose machine with a mounting for clinch riveting brackets. The unit is intended to be used as a component donor for a custom solution. Motor manufacturer: Behncke, 5.5 kW. Rated power: 8.5 kW. Hydraulic unit manufacturer: FluTec, year 1999. Bedpfx Aexg Rkqsb Telr

Condition: used, tank capacity: 250,000 l, GENERAL Design: upright Outside diameter: 4,550 mm Overall height: 22,950 mm Insulation: available Stand type: support ring Location: outdoor storage Technical documentation: various documents Nameplate: Volume: 250,000 litres Wall thickness cylinder: 5 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: brewery INSULATION Insulation jacket: riveted Insulation material: PU foam Insulation jacket material: aluminium Blodpjxqdgtofx Ab Tjr Insulation thickness / mm: 150 mm EQUIPMENT Outlet: available TECHNICAL DATA / MASSES Bottom wall thickness: 15 mm

Condition: excellent (used), Here we offer you a ToX full punched rivet system. Bledpfedz Af Aox Ab Tor ToX full punched rivet system type TZ-VSN The full punch rivet severed all joining and pushes the slug from the joint. TOX PRESSOTECHNIK, supplemented with innovative technology for full self-piercing rivets the specialist for sheet metal connections, his delivery and performance program is a pioneering procedure. The full punch riveting offers an additional mechanical connection of sheet metal, This is for lightweight construction and the combination of hybrid parts and assemblies of great importance. The rivet advancements, forceps, and toolholders are also so universally designed, that full punching rivets with a diameter of 4.0 mm and lengths between 3.3 and 8.1 mm as well as full punching rivets with a diameter of 5.0 mm and lengths between 3.9 and 9.0 mm with TOX - hand pliers as well as with TOX robot pliers flexible can be processed. Type TZ-VSN Pressing force 55KN Total stroke 140 mm Rivet type: Diameter 5 x 4, 6 Connection values Performance: 3,4KW Power supply: 400/15/50-60 V / A / Hz Speed: 200mm / s Web form: 3 p + N + PE Control voltage: 24 V DC Back-up fuse: 25 A Type: TZ-VSN Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: used, tank capacity: 5,100 l, GENERAL Design: vertical Remarks: Agitator drive missing; minor dents on the insulation jacket (see photos) External diameter: 1,550 mm Internal diameter: 1,400 mm Total height: 4,500 mm Insulation: present Agitator: propeller Mount type: feet Location: outdoor storage Volume: 5,100 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,340 mm TANK Number of feet: 3 pieces INSULATION Insulation jacket: riveted Insulation material: mineral wool Insulation thickness / mm: 50 mm EQUIPMENT Manhole / dome: on top head (DN 500) Blsdpfx Ajxqdbdsb Tsr Outlet: DN50 DIN 11851 AGITATOR Agitator arrangement: eccentric on top head

Condition: excellent (used), Tucker Nimak MF180: Robot welding guns for single-sided resistance spot welding The robotic welding guns for single-sided resistance spot welding from NIMAK work with state-of-the-art medium-frequency transformers, a control unit with adaptive welding current control and finely adjustable welding cylinders for gentle power. The right amount is needed to reliably join materials without deforming them or leaving marks on the visible side. or leaving marks on the visible side. Our systems master this task perfectly. Tucker Stanley C-clamp self-pierce riveting tool With Tucker® SPR equipment, you can join materials that cannot be easily welded, including aluminum-aluminum, aluminum-steel and high-strength steel, by combining two technologies in one modular system: Bsdpjrqfk Ajfx Ab Tjlr Self-pierce riveting with semi-tubular rivets and solid self-pierce riveting. AEG SVS Schweisstechnik Electrode milling unit EF310-01E-S-D-Fix Milling of spot welding electrodes Automatic rivet feed With controller: The brain of every SPR system. It manages, thinks, remembers and communicates in an Industry 4.0 environment The lung - Small, quiet and fast rivet feeder for your SPR tool. Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, tank capacity: 5,500 l, GENERAL Equipment: Disc valve Design: upright Remarks: Agitator drive missing; insulating jacket loose in several places (see photos) Inner diameter: 1,450 mm Total height: 4,400 mm Insulation: present Support type: feet Location: external storage Volume: 5,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,350 mm TANK Number of feet: 3 pcs INSULATION Insulation jacket: riveted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: pipe end, approx. 40 mm diameter MATERIAL SPECIFICATION Blodexqdatspfx Ab Tjr Feet material: stainless steel AGITATOR Agitator arrangement: eccentric in the top head

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Autoriv manual workstation A220-PD assembly system is a stationary manual workstation for processing press-fit elements. Intended use: The machine is used to press in fasteners. The worker inserts the corresponding screws, plastic nuts and the component to be and the component to be processed into the machine by hand. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fasteners: Press-in nut, rivet nut, self-piercing nut, press-in stud, punching stud / rivet stud Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connector plug HAN 10, not wired Temperature ranges: Transport: - 20°C to + 60°C Operation: + 10°C to + 40°C Storage: - 20°C to + 50°C Compressed air connection: Operating pressure: 6 bar Quality: Conditioned, water-free and and unlubricated air Connection: 1⁄2" connection thread Machine dimensions: Bljdpfxstgik Ro Ab Ter Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control system: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fasteners are pressed in automatically. Movements are only triggered when the operator presses the foot pedal and triggers the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: Used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, tank capacity: 1,600 l, GENERAL Design: horizontal Remarks: 4 stainless steel feet, bolted to 4 stainless steel pads; manhole DN 400; slight metallic discoloration inside; further technical documents available External diameter: 1,060 mm Internal diameter: 900 mm Total height: 2,100 mm Overall length: 2,700 mm Insulation: available Max. overpressure: 2.0 bar Support type: feet Location: Bremen Technical documentation: drawing Nameplate: Vacuum: 1.0 bar Volume: 1,600 liters Blsdpfx Absxqc Ezj Tsr Shell wall thickness: 4 mm Product-contacting material: V4A 1.4435 (AISI316) Condition: used Previous application: pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 95 °C Number of feet: 4 pcs INSULATION Insulation jacket: riveted Insulation jacket material: aluminum EQUIPMENT Manhole / dome: on the vessel Outlet: flange DN65 Note: dents on insulation jacket, manhole cover missing MATERIAL SPECIFICATION Material feet: stainless steel TECHNICAL DATA / DIMENSIONS Wall thickness ends: 4 mm

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch riveter operating voltage: 400V 50 Hz rated current: 12A Main fuse: 35 A control voltage: 24 V signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 279 kg year of manufacture: 2012 Type: 9524-640-824-5 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Bodpjpfcx Ssfx Ab Telr Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch rivet pliers 9524-640-826-7 operating voltage: 400V 50 Hz rated current: 13A Bedpfxepgulae Ab Tjlr Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V year of manufacture: 2011 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 195 kg type: 9524-640-826-7 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.