Used Rivet Press for sale (12,587)

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Strokes per minute: 100/min Fpsdpfx Ajzypd Nsk Uel Throat depth: 750 mm Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Ram weight: 750 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Fpsdpfxjzzkvcj Ak Uol Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: used, Drawer Press ZVB/ ZUB Fjdpfx Akex Dkygo Ujpl Dimensions (W x H x D): approx. 250x200x100 cm, with 3 press rams, of which 2 are electrically movable, control cabinet, operating terminal, 1 KUPER glue application unit, 1 drilling unit,

Condition: used, Year of construction: 2005, Pneumatic Press Tox Inventory No. 3941 Power Pack Press Tox Pressotechnik Type Stiskalnika 12050052 Year of Manufacture 2005 Type BS 15.30.100.06 No. 800322.35 * Two-hand control STE 003-03- 1/2" * Pressure force kN * Working stroke mm * Power stroke mm * Reach approx. 220 mm * Table size 450 x 400 mm * Installation height approx. 265 mm * 2 manual controls * Air inlet bar * Electrical connection 230 V * Space requirement: approx. W 700 x H 2050 x D 1050 mm Fpedpfozzrugjx Ak Uol * Weight approx. 500 kg

Condition: good (used), Year of construction: 1985, power: 1.5 kW (2.04 HP), overall weight: 1,700 kg, Eccentric press EBU H25 Year of manufacture: 1985 Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us. Fsdpfx Akezv Sito Uepl

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 73.331.611.504, functionality: fully functional, power: 18.5 kW (25.15 HP), pressing force: 175 t, stroke length: 265 mm, throat depth: 450 mm, working width: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Max. working width: 3,050 mm Frame distance: 2,600 mm Overhang: 450 mm Max. stroke: 265 mm Crowning system: CNC-controlled Number of axes: 3 Axes: Y1, Y2, X Back gauge depth: 1,000 mm Ram holder: Standard Tool holder type: European Style Fedpfx Akjzxcf Ro Uspl MACHINE DETAILS Drive system: CNC Control system: Durma Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 4,250 x 1,950 x 2,700 mm Weight: 10,520 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 400 mm, table width: 1,200 mm, table length: 2,550 mm, clearance between the columns: 650 mm, total length: 1,400 mm, total width: 3,000 mm, total height: 1,930 mm, overall weight: 3,400 kg, This OTT veneer press from the Junior series, model 2512, with 6 pressure cylinders, is a classic hydraulic heated platen press for carpentry and woodworking. It has been completely overhauled by the Ott factory. 6 hydraulic pressure cylinders ensure extremely even pressure distribution over the entire surface, which is particularly important for demanding veneer work to prevent bonding errors. Fpedpjzv U Hzjfx Ak Usl The use of 6 cylinders (instead of the often standard 4 cylinders for this length) minimizes the deflection of the press plates. This also allows for the pressing of smaller workpieces with high specific pressure without the plates warping. It is equipped with electric aluminum heating plates (gold anodized). The machine is connected and can be tested. Sale B2B without warranty/guarantee.

Condition: used, Year of construction: 2009, functionality: fully functional, pressing force: 60 t, filling opening width: 1,000 mm, filling opening length: 1,450 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, total width: 2,500 mm, total height: 3,500 mm, total length: 9,255 mm, overall weight: 14,000 kg, warranty duration: 12 months, transport height: 2,587 mm, transport width: 2,500 mm, transport length: 6,645 mm, Equipment: documentation/manual, For sale is a bale press, model EP 6000 V5, manufactured in 2009. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the demands of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses Fpsdpfx Akszgf Hgj Ujl • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the bale tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We would be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: used, Year of construction: 2019, functionality: fully functional, pressing force: 5 t, stroke length: 60 mm, throat depth: 240 mm, ram plate width: 260 mm, ram plate length: 220 mm, overall weight: 233 kg, Equipment: CE marking, We are offering this used TOX PFHL 056.002.A.060 pneumatic knee-lever press, manufactured in 2019. Type: PFHL 056.002 Serial number: 439487.144 Description: Pneumatic press Maximum pressing force: 57.5 kN Total stroke: 60.0 mm Minimum air pressure: 3 bar Maximum air pressure: 6 bar Weight: 233.0 kg Year of manufacture: 2019 With stroke counter Including tool holders Mobile base frame optionally available (see last image) Fpedezy Uz Hspfx Ak Ujl Condition: see images, mechanically in perfect condition If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: B0104A0167, functionality: fully functional, operating hours: 29,966 h, pressing force: 130 t, stroke length: 215 mm, overall weight: 11,250 kg, 6 controlled axes Includes new tools worth €12,000!!! Everything is fully functional. Fsdpfx Aezy Ryxsk Ujpl

Condition: used, Year of construction: 1987, functionality: fully functional, power: 1.1 kW (1.50 HP), overall weight: 1,500 kg, Eccentric press EBU H16 Year of manufacture: 1987, 1500 kg, 1.1 kW Fpodpfxezv Sl Ij Ak Ujl Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us.

Condition: used, Year of construction: 2008, functionality: fully functional, For sale: a window and door pressing machine, model Junior, manufactured by the Italian company Casolin. Bale pressing machine. Working area: 3000 mm (width) x 2500 mm (height). The machine is in good working order. Fpedpfx Akozzn Dwe Usl We have the instruction manual in English. Export price – domestic price + VAT. Transportation is the responsibility of the buyer; loading is the responsibility of the seller.

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. Fedpju Axfcofx Ak Uepl All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: used, Year of construction: 1991, functionality: fully functional, input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, total length: 1,450 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 3,500 kg, We are offering this used Walter hydraulic press, manufactured in 1991, for sale. Year of manufacture: 1991 Fpsdpszxp Ufsfx Ak Ujl Condition: used If you have any questions or require further information, please do not hesitate to contact us by sending a message or calling us. Documentation is available.

Condition: ready for operation (used), functionality: fully functional, stroke length: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, TECHNICAL DETAILS Press drive: Hydraulic Max. workpiece length: 3,000 mm Max. workpiece width: 1,300 mm Max. workpiece height: 450 mm Total stroke: 450 mm Number of cylinders: 6 Cylinder diameter: 70 mm Heating type: Oil-heated Max. temperature: 120 °C Separate heating for top/bottom: Yes MACHINE DETAILS Number of work areas: 1 Number of levels: 1 Fedpjzxcmuofx Ak Ujpl Plate material: Steel Main motor power: 2.2 kW Connected power: 10.0 kW Voltage: 400 V Fuse rating: 32 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,650 x 2,400 mm Weight: 3,500 kg Transport packages: 1 EQUIPMENT Heating boiler Note: The plates require repair. The plate on the lower bed is missing.

Condition: used, Year of construction: 1977, pressing force: 75 t, Eccentric press EBU SK75 U Year of manufacture: 1977 Location: Bad Tölz Inspection is welcome. Fpsdpfx Akjzv Skds Usl We have other used machines available. Please feel free to contact us.

Condition: ready for operation (used), Manual spindle press / 25 tons -Clearance between columns: 400mm -Spindle diameter: 80mm -Vertical clearance: 420mm -Various clamping jaws Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight: 700kg Fedpfx Aozcxdlek Uepl Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX Colour Press C550 with CREO CX560 Print Server (Activation dongle for monitor, keyboard and mouse is included, the accessories themselves are not included!), i1 Spectrophotometer, A3+/SRA3 High Capacity Feeder with 1 Tray & Professional Booklet Maker Finisher for sale. OPTIONAL: As an alternative to the CREO Print Server we can also attach an integrated FIERY EX-i 560 controller to this machine at the same price. Please ask for the FIERY in this case. The machine will be delivered with either CREO Print Server or FIery Controller. Counter: ONLY 1.730.992 prints total This machine was fully and professionally checked in the seller's workshop and is in excellent condition with perfect print image quality. Please contact us with questions! We will be happy to help you! Fpodpfx Akozrulpe Uol

Condition: good (used), Year of construction: 2011, operating hours: 23,105 h, functionality: fully functional, Soon available Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: as of 09/26: 23,105 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-strand horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Fpodpfx Ajzyl Htjk Usl Accessories: Hopper Note: The press is expected to be dismantled in mid/late September and can be inspected in operation until then, if desired. The conveyor belt shown in the photos is not included in the scope of delivery and can be purchased as an option. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server EX-P6 Includes paper decks A-CF03 + A-CF04 Includes stacker Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Fpjdpfszap Sbex Ak Ujl Total: Approx. 14,303,610 pages Colour: Approx. 14,006,634 pages Black: Approx. 296,976 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4079, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 500 mm, table width: 1,200 mm, table length: 1,000 mm, table height: 850 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 800 mm, oil tank capacity: 400 l, total length: 2,200 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 4,000 kg, year of last overhaul: 2023, Equipment: CE marking, safety light barrier, For sale is a hydraulic double-column press. Manufacturer: Hans Schoen, Type: NH/D 30S. The machine is in perfect working order and can be inspected while powered on. Fpjdpozzd Rgofx Ak Uel

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 91.898, functionality: fully functional, pressing force: 100 t, stroke length: 120 mm, throat depth: 250 mm, controller model: HACO ATL 565, working width: 3,600 mm, TECHNICAL DETAILS Press force: 100 t Max. working width: 3,600 mm Fjdszxdxxopfx Ak Ujpl Frame spacing: 3,300 mm Overhang: 250 mm Max. stroke: 120 mm Back gauge depth: 600 mm Crowning system: Mechanical MACHINE DETAILS Drive system: CNC Control system: HACO ATL 565 Number of axes: 3 (Y1 + Y2 + X) Dimensions & Weight Dimensions (L x W x H): 4,800 x 1,800 x 2,250 mm Weight: 8,200 kg Transport packages: 2 EQUIPMENT Mechanical crowning system Quick-release die holder Tool holder in European style Tools CE marking

Condition: used, Year of construction: 1989, functionality: fully functional, MONTHLY OFFER: This machine needs to be sold!!! Heidelberg GTO 52-1 Colors: 1 Year: 1989 Dampening system: Kompac Maximum format: 520x360 mm (20x14 inches) Current status: In stock Impressions: 39 million Availability: Immediate Location: Italy Fpsdpfx Aezzd Swok Uel SPECIAL PRICE (for quick confirmation): €3,000 (Loaded)

Condition: good (used), Year of construction: 2000, RAS 73.30 Flexibend CNC bending machine / swiveling bending machine. The machine is equipped with segmented tooling and a quick-clamping system. Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2000 Working bending length: 3200 mm Max. sheet thickness: 3.0 mm Opening height of the top beam: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: approx. 4.4 tons Control: FlexiBend 5000 CNC-controlled rear stop: 10–1550 mm Automatic adjustment of the lower blade on the bending beam Two control pedals Segmented upper blades, height 155 mm Do you have any questions? Please feel free to contact us. Fjdpfszz A Nujx Ak Uspl

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 10710, functionality: fully functional, HYDRAULIC PRESS BRAKE LVD PPN 300/30 Year of manufacture: 1982 Serial number: 16270 TECHNICAL SPECIFICATIONS Maximum capacity: 3000 kN Working length: 3000 mm Distance between uprights: 2550 mm Ram stroke: 250 mm Maximum distance between ram and table: 500 mm Gap: 300 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 8.8 mm/s Return speed: 96 mm/s Main engine: 22 kW Weight: 16000 kg NC controller: ELGO X-Y  Solid back gauge with range on X axis: 600 mm  2 fingers on back gauge  2 front supports of 1000 mm Fsdpfszzxgcsx Ak Uepl TOOLING: a. Multi-V M130, Length: 3050 mm b. Toolholder LVD Classic 15 to LVD Classic 15, Length: 3050 mm c. Straight top tool R15 H130 86°, Length: 3050 mm d. Gooseneck top tool D15 H130 86°, Length: 3050 mm e. Straight top tool R15 H130 26°, Length: 3050 mm