Used Ricky Grinding Machine for sale (64,893)

Condition: used, Year of construction: 2010, functionality: fully functional, grinding length: 650 mm, grinding width: 250 mm, total height: 1,900 mm, total length: 2,000 mm, total width: 1,600 mm, feed length X-axis: 650 mm, feed length Y-axis: 350 mm, feed length Z-axis: 300 mm, grinding wheel diameter: 200 mm, distance table to spindle center: 300 mm, table length: 500 mm, table load: 200 kg, type of input current: three-phase, table width: 250 mm, spindle speed (min.): 2,800 rpm, overall weight: 2,200 kg, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, VB.Tech surface grinding machine for flat surfaces, model SGA 2550 AHD, year 2010. The machine is equipped with a magnetic table and automatic feeds, ideal for mechanical workshops, toolrooms, and finishing operations. Complete with coolant system and digital readouts (DRO). 🛠️ MAIN FEATURES Magnetic table: 500 × 250 mm Longitudinal travel (X): 650 mm Cross travel (Y): 350 mm Max workpiece height: 300 mm Max grinding wheel diameter: 200 mm ⚙️ EQUIPMENT Magnetic table with demagnetizer Coolant system with tank and pump Automatic feeds Digital readouts on axes Complete guards and covers Fully functional, complete, and ready to use. General conditions are good, with normal signs of use consistent with its age. Hfsdpfoy Af Ulex Agfef Available for testing upon request.

Condition: excellent (used), Year of construction: 2005, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 4,120 mm, travel distance Y-axis: 2,310 mm, For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced. Hfodpfxsymgfls Agfsf The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet. Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled. Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry. Technical specifications: 1. Working area: 4.12 × 2.31 meters 2. Software: ICam 3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs) 4. 3 reference starting points 5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used. The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility. Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed. A VAT invoice will be issued. The listed price is NET. Possible disassembly date: From 10/02/2026 onward. Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased. Preferred contact method: email.

Condition: good (used), – Magnetic plate 250 x 150 mm – 380V Hedjy Abzzopfx Agfeff

Condition: new, width of the strips 100 mm band length 915 mm dimensions of grinding wheel 200 mm work table: 170x125 / 265x150 mm Hjdjupxqwopfx Agfsff total power requirement 0,5 kW weight of the machine ca. 26 Kg dimensions of the machine ca. 0,6 x 0,5 x 0,3 m

Condition: new, width of the strips 150 mm Hfodsfhk T Hspfx Agfof band length 1220 mm dimensions of grinding wheel 225 mm work table: 150 x 400 mm Table tiltable up to 90 Grad table surface area 150 x 130 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 35 Kg dimensions of the machine ca. 650 x 360 x 400 mm

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. Grinding area 600 x 300 mm Dimensions of grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulic infinitely variable 5 - 25 m/min. cross feed 0,1 - 20 mm Cross feed 900 mm/min. Handwheel, transverse 1 revolution 5 mm 1 graduation mark 0.02 mm Automatic vertical infeed 0.001 - 0.999 mm/time Handwheel, vertical 1 revolution 2 mm 1 graduation mark 0.01 mm Euei3ccb with the AD 5 (automatic infeed) 0.005 mm Grinding motor speeds 1450 / 2900 rpm. grinding motor 1,5 / 3,7 kW hydraulic pump motor 0,75 kW drive motor , transverse 1,1 kW Drive motor , vertical 1,1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: - 2-axis digital display - Automatic vertical infeed with spark-out and subsequent upward movement - Electro-magnetic clamping plate L x W 600 x 300 mm Hfjdpsizka Iofx Agfjf - Manual grinding wheel dresser - Grinding wheel speed, 2 steps - 1 pc. grinding wheel with flange - Control panel - illumination - Coolant system with belt filter and magnetic separator - Machine feet - CE conform Siegfried Volz Machine Tools Rüschebrinkstr. 11-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length: 670 mm Max. grinding width: 280 mm Max. grinding height: 400 mm Table speed, longitudinal: 2 – 35 m/min Table speed, cross: 0.3 – 40 mm/stroke Rapid traverse: yes Grinding wheel dimensions: 300 / 76 x 40 mm Drive power: 4 kW Machine dimensions L x W x H: 2000 x 1850 x 2000 mm Machine weight: 2300 kg Hydraulic & electrical system dimensions L x W x H: 1200 x 800 x 2000 mm Hydraulic & electrical system weight: 650 kg Accessories / Special features: • Permanent magnetic chuck 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine levelling elements Note: o Hydraulic cylinder for table stroke newly sealed o New filters in hydraulic unit o Handwheel adjustment for crossfeed newly mounted Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Hfjdpfxef Um Rao Agfof

Condition: ready for operation (used), feed length X-axis: 920 mm, feed length Y-axis: 400 mm, Surface Grinder HIDROPRECIS - Table: 800 x 450 mm - Y-axis travel: 920 mm Hjdpfoyz Infsx Agfsff - X-axis travel: 400 mm - Maximum grinding height: 500 mm - Wheel motor power: 7.5 hp - Grinding wheel: 350 x 127 x 100(50) - Coolant filter - Dimensions: 3,500 x 2,500 x 2,300 mm - Weight: 3,500 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 40/3000 CNC Control system: Siemens One Digital axis drives Includes comprehensive user software Includes electronic handwheel for X/Z axes Centre height: 400 mm Centre distance: 3000 mm Workpiece weight between centres: 500 kg Longitudinal Z-axis travel: 3250 mm Positioning accuracy X-axis: 0.001 mm Workpiece spindle head taper: MK 5 Tailstock taper: MK 5 Drive power: - Grinding spindle: 11 kW - Workpiece spindle: 2.5 kW - Total installed: 22 kW Machine in full enclosure Prepared for extraction system, including fittings Separate monitor, touch probe control, automatic balancing, as well as gap/crash control included. 1 grinding wheel: 508 x 80 x 203.2 mm Available immediately. Optional filtration units available in various designs. Hfodpfev N D Hbjx Agfjf

Condition: used, Year of construction: 1989, functionality: fully functional, drilling capacity: 50 mm, Equipment: documentation/manual, Used grinding machine for sale. Ideal for workshops and DIY enthusiasts. The machine is fully functional but shows signs of wear consistent with its age. Perfect for sharpening tools and various grinding tasks. Robust construction ensures long-lasting durability. A must-have for every craftsman! Invest in quality. Grinding of two- and three-edged tools, drills up to 50 mm diameter Comprehensive documentation and instructions available Very versatile grinding machine, ready for use Hfjdpfsyz Iipex Agfsf

Condition: excellent (used), Year of construction: 2004, Table size 450 x 150 mm Max. Grinding area 450 x 150 mm Grinding wheel dimensions 180 x 13 x 31,75 mm Min. / max. distance table / spindle center 450 mm Table speed manual Cross feed manual Handwheel, transverse 1 revolution 5 mm 1 graduation mark 0.02 mm Vertical infeed manual Handwheel, vertical 1 revolution 2 mm 1 graduation mark 0.01 mm Grinding motor speed 2900 rpm. grinding motor 1,5 kW Machine dimensions L x W x H approx. 1820 x 1280 x 1950 mm Weight 870 kg Accessories / Special features: - 2-axis digital display - Permanent magnetic clamping plate L x W 450 x 150 mm - Manual grinding wheel dresser - Manual fine adjustment vertical + cross - 1 pc. grinding wheel with flange Hodpfxsh Ukrqo Agfsff - Lighting system - exhaust system - Coolant system - Machine feet - CE conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Hydraulic cylindrical grinding machine Center height 100 mm Center width 500 mm Grinding wheel diameter min./max. 200 - 300 mm 3 grinding wheel revolutions 2,250 - 2,420 - 2,680 rpm Workpiece spindle head: 8 workpiece speeds, adjustable 30 - 750 rpm. Spindle taper or inner taper of the workpiece spindle MK 4 Tailstock: Inner taper of quill MK 3 Quill travel 30 mm Table: Maximum table inclination +/- 6° Table speed, adjustable 0.1 - 6.0 m / min. Motor power 3 kW Dimensions L x W x H 1650 x 1350 x 1400 mm Weight 1900 kg Accessories / Special features: - Manual or automatic operation - Automatic infeed - Grinding wheel flange with grinding wheel - Wet grinding device Hodpjr E Aziofx Agfeff Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, Year of construction: 2008, Deburring machine with belt sander Manufacturer: Weber Type: MK 900 Year of manufacture: 2008 Control system: Weber “i-Touch” Controller with Multi Panel Sanding belt length: 2,620 mm Working width: 900 mm Working height: 900 mm (constant) Workpiece thickness: 3–120 mm (depending on model up to 1–100 mm) Feed speed: 1–10 m/min. (infinitely adjustable) Sanding belt drive: up to 37 kW (depending on station) Especially suitable for the processing of oxyfuel and plasma-cut parts (heavy plate) Hsdpfx Aoyy Dcvegfeff

Condition: good (used), Year of construction: 1985, functionality: fully functional, The ELB SW 4/2 is a classic conventional surface grinding machine. Specific data may vary depending on the version (e.g., VA I, VAI-Z), but the key technical specifications typically fall within the following range: Machine type: Surface grinding machine (horizontal) Working area Grinding length: approx. 450 mm Grinding width: approx. 250 mm Max. workpiece height: approx. 280 mm Hfodeyy Aczopfx Agfsf Grinding spindle Grinding wheel: Ø 250 mm × 25 mm width Bore: 51 mm Speed: approx. 1,430 / 2,900 rpm Spindle motor: approx. 2.5 kW (total power ~4.5 kW) Axis travels Vertical travel (Z): approx. 400 mm General data Total power: approx. 4.5 kW Machine weight: approx. 1,800 kg Dimensions (L×W×H): approx. 1,800 × 1,400 × 2,000 mm

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Hfodpfx Aewhm Rfjgfof Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2014, functionality: fully functional, grinding length: 600 mm, grinding width: 300 mm, Main machine data: - Table size (W x L): 600 x 300 mm - Electro-magnetic chuck: 300 x 600 x 70 mm - Grinding wheel size: 355 x 25 x 127 mm Drive performance: - Spindle motor: 2.2 kW Machine dimensions: Dimensions: - Length: 2,300 mm - Depth / Width: 1,550 mm - Height: 1,950 mm - Machine weight: 1,650 kg Standard equipment: - CNC-controlled vertical feed AD1 - Electro-magnetic chuck - Automatic demagnetizing device - Electronic cross-feed adjustment via operator panel - Coolant system with extraction, paper filter, and magnetic separator - Parallel dressing device (head-mounted) - Dressing device for table mounting - Motorized rapid traverse adjustment (vertical) - Grinding wheel flange - Grinding wheel - Halogen lighting - Balancing arbor Hfsdpsyyymwefx Agfjf - Balancing scale - 1 set of splash guards Incl. 3 grinding wheel flanges Incl. fine-pole electro-magnetic chuck 300 x 600 mm Pole pitch: 3 mm, pole width: 1 mm Instead of standard electro-magnetic chuck

Condition: ready for operation (used), Year of construction: 1997, operating hours: 20,045 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, table load: 300 kg, overall weight: 4,500 kg, travel distance W-axis: 450 mm, Equipment: documentation/manual, For sale: used Hauser S35-400 coordinate grinding machine, year of manufacture 1997, in well-maintained condition with various accessories as shown in the photos. Travel paths: X-axis: 500 mm Y-axis: 300 mm W-axis: 450 mm Z-axis feed rate, stepless: 0.5–14,000 mm/min Hsdpfx Aeyywb Ssgfoff Table size: 600 x 380 mm Maximum table load: 300 kg Control: GE Fanuc Series 16-M Dimensions (L/W/H): 4.25 m x 4 m x 3.25 m Total weight: 4,500 kg Machine is immediately available! Price includes loading onto truck!

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed * Hfedpfx Agou Ngrqsfef

Condition: ready for operation (used), Year of construction: 1991, grinding length: 1,000 mm, grinding width: 500 mm, capacity 1000x500MM electromagnetic 1000x500MM grinding wheel 400x50x127MM visual readout Z axis Hedpfx Agoypv Rpefjff weight 5000KGS

Condition: used, Year of construction: 1970, surface area 600 x 200 mm Magnet size 500 x 200 mm dimensions of grinding wheel 225 x 25 x 51 mm Distance spindle/table max. 400 mm Table longitudinal feed 1 - 20 m/min creep feed 0 - 500 mm/min grinding wheel speeds 800 -4.200 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hfodpfx Agoyyqqmefef The machine was overhauled in 2002. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), grinding diameter 450 mm grinding length 600 mm centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s Hfsdpfx Aoxcblqjgfef dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1, center height: 150 mm, center width: 480 mm, grinding diameter: 299 mm, New arrival 1 Hydraulic Universal External and Internal Cylindrical Grinding Machine TSCHUDIN HTG 410 U – Year 1988, partial overhaul in 2026 – 150 mm center height x 480 mm center distance – workpiece spindle head MK 5 with stepless speed adjustment. Grinding wheel left and right – swiveling internal grinding attachment with 18,000 RPM Machine equipped with four-axis digital readout – X-axis – Y-axis and rotary encoder with one-micron resolution when swiveling the universal grinding spindle head and workpiece spindle head! Pneumatic air cushion lifting for effortless swiveling of workpiece spindle head and grinding spindle head. Machine includes four-jaw chuck, halogen lamp, paper band filter, folding dresser, and balancing arbor. Guideways in X-axis newly scraped – machine thoroughly inspected by specialist. Automatic cycle with "rapid traverse to automatic infeed – dwell time – retraction – infeed dimension remains set". Very little used machine from prototype manufacturing! Price on request (Domestic sales plus 19% VAT.) Technical data not binding – subject to prior sale and errors. Best regards, Hfodpfovdumbjx Agfof INDUBA GmbH Mathias Becker D-78628 Rottweil

Year of construction: 2014, condition: new, Double grinding machine REMA DS 40/400 Motor : 3kw , Hsdpfx Agogkrxcefjff plus four boxes of grinding wheels

Condition: used, Manufacturer: AMADA, Tape speed. 0-31 m / min Hfjdpfx Asyyhvgegfef

Condition: used, Year of construction: 1983, grinding length: 3,100 mm, grinding width: 1,100 mm, Surface grinding machine Hfedpfx Aoyw Iaaegfef Manufacturer: Officine Meccaniche F.lli Minini (Italy) Model: T.H. 10.30 Working area (grinding): approx. 3100 × 1100 mm Year of manufacture: 1983