Used Replacement Parts for sale (16,686)

Condition: used, Year of construction: 2022, machine/vehicle number: 102003026, overall weight: 341 kg, load capacity: 600 kg, protection type (IP code): IP52, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 600 kg Max. speed: 2 m/s Protection rating: IP52 MACHINE DETAILS Dimensions & Weight Transport dimensions (L × W × H): approx. 1,380 × 1,000 × 1,180 mm Weight: approx. 341 kg Bsdpjzwn S Tefx Acnoll The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, Year of construction: 2022, total length: 400 mm, total height: 450 mm, total width: 400 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 400 x 450 mm Weight: approx. 20 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided is based on the original offer. Bledpfx Acszwn Tksnjl No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, Scharmann Drilling Machine Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Bjdpfx Ajzilmrecnell Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Lateral (Z): 1,150 mm Spindle speed: 20 – 6,000 min⁻¹ Table size: 1,200 × 1,400 mm Table load: max. 6 t Without tools and accessories. Disassembly begins after payment is received. Collection in September. Being replaced with a new machine. Very important: • The height and weight of the asset must be taken into account when selecting the transport vehicle. • There is no loading dock on site. However, a forklift or an overhead crane is available for loading. • If collection is not carried out on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. • The sale is made excluding any guarantee or warranty. • The information provided consists of the technical data from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm Bsdpfozt Ni Esx Acnjll * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: used, Year of construction: 2018, machine/vehicle number: 1800603, total length: 2,485 mm, total height: 1,715 mm, total width: 1,245 mm, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, input current: 13 A, working height: 870 mm, width of welding knife: 600 mm, length of welding knife: 400 mm, passage height: 240 mm, overall weight: 763 kg, passage width: 400 mm, power: 3 kW (4.08 HP), film width: 700 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), year of last overhaul: 2025, Equipment: documentation/manual, IMPORTANT NOTE – KNOWN WEAR: A conveyor belt (infeed/outfeed belt, part no. 400201) is worn. A quote from the authorized service partner for €879.59 net for material and labor is available. Alternatively, replacement can be carried out independently. We will provide interested parties with the repair quote upon request. Minipack-Torre Pratika 56 MPE X1 – fully automatic L-bar sealer, year of manufacture 2018, serial no. 1800603. Sold directly by the end user. Fully automatic machine for shrink wrapping and film packaging. Schneider-Electric Magelis touchscreen with 256 storable recipes for format, temperature, and speed. Bsdpjy Stuxefx Acnell SPECIFICATIONS - Output up to 3,600 pieces per hour - Sealing bar 600 × 400 mm - Product height up to 240 mm - Films: Polyolefin/PVC/OPP, 7–80 µ - Film roll up to Ø 300 × 700 mm - 230 V single-phase, 3 kW; no three-phase power or compressed air required - L × W × H: 2,485 × 1,245 × 1,715 mm - Weight: 763 kg - Schneider brushless servo drive, PLC logic, emergency stop and safety functions CONDITION AND MAINTENANCE Optically in very good condition. Operating hour counter: 36,415 packages, indicating moderate use. In May 2025, the sealing wire, upper and lower rubber strips, and Teflon tape were replaced. Maintenance and repair documents are available. Due to the aforementioned conveyor belt, the machine will be handed over in the described "as is" condition; inspection and functional testing are expressly desired. SCOPE OF DELIVERY - Machine with glass hood, Magelis touchscreen, safety functions and connection cable - At least one matching film roll with a width of 600 mm - Possibly another remaining roll; the exact stock will be checked before handover - Machine on four swivel casters - Original documents, including data sheet, order confirmation and available maintenance and service correspondence LOCATION, TRANSPORT AND HANDOVER Location: 18239 Satow, Mecklenburg-Vorpommern. Inspection and functional testing are possible by appointment. The buyer organizes and pays for collection or transport. If desired, we will assist in organizing suitable freight or courier transport. Due to the weight of 763 kg, a suitable special pallet and packaging are required; transport costs will be added to the purchase price. PRICE AND SALE - Fixed price: €7,479 net (= €8,900 gross including 19% VAT) - Commercial sale by Marko Strehk Einzelunternehmen - Known wear and tear is fully listed above - The machine can be inspected and tested before handover - In the event of an intra-community delivery, the tax requirements and proof will be checked in advance If you are interested, we will gladly send you the repair quote and the available documents.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a high-quality CNC carousel turning, boring, and milling center from the German manufacturer Konrad Seidler from Neuss – Holzheim, model: MINIMAX 1800, built in 2013. The machine comes from a single owner and was used in a single-shift operation in our own production facility. After the commissioning of a new manufacturing solution, the machine was decommissioned, the spindle was renewed/overhauled, and the machine underwent a comprehensive service. Since then, it has been in operational condition but is no longer used in production. The machine is in fully functional and ready-to-use condition. An inspection and a test run under power can be arranged at any time. Of particular note is the extensive overhaul of the boring/milling spindle in 2025, which brought a significant wear component of the machine back to like-new condition technically. Investment costs: 36.5 TEUR. Documents available. Highlights: • Turning, boring, and milling center in one machine • Year of manufacture: 2013 • Siemens 840D SL CNC control system • SINAMICS 120 drive technology • Tool changer with 16 stations • HSK100 tool holder • Rotary table load: 6,000 kg • Rotary table speed: 5–500 rpm • Milling spindle up to 6,000 rpm • High-pressure coolant system: 30 bar • Chip conveyor • Walk-in work area • Single owner • Extensive documentation available • Available for short-term delivery In 2025, the installed Capellini high-performance spindle (HSK100, 6,000 rpm) was completely overhauled by a specialized company (Deuschle). Excerpt of work performed: • Measurement of all components on a measuring machine • Replacement of precision bearings (FAG / SKF / GMN / NSK) • Replacement of the HSK100 clamping system • Replacement of Balluff sensors • Refurbishment of the spindle shaft using laser welding and grinding • Replacement of all wear parts • Fine balancing according to ISO 1940 • System balancing of the complete spindle assembly • Adjustment of bearing spacers • Final inspection including test report Technical data: Control system: Siemens 840D SL Drives: SINAMICS 120 Turning diameter: 500–1,270 mm Rotary table load: 6,000 kg Rotary table speed: 5–500 rpm Boring/milling spindle: 30 kW Torque: 190 Nm Boring/milling spindle speed: 2–2,500 rpm (max. 6,000 rpm) Tool holder: HSK100 Tool changer: 16 tools Coolant system: 6 bar / 30 bar high pressure Chip conveyor: Cross conveyor, discharging to the left Discharge height: 1,200 mm Bljdpfjzhlbmex Acnol Machine weight: approx. 22,000 kg Enclosure: Double sliding door, walk-in work area Documentation available: • Operating manuals • Installation manuals • Electrical diagrams (partly) • Documentation of machine components • Documents for the control system • Documents for the chip conveyor • Other original documents from the commissioning Sale ex works, excluding loading. The buyer organizes the crane and transport. If you have any questions or need more information, please send us a message or call us.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for CMP and SCC 61/101 electric combi-steamers manufactured from 2011 to the present (index H+I). The hood has been inspected in our in-house workshop and is fully functional. The hood has dents and scratches on one side panel due to improper transportation. This does not affect the hood's functions; however, for this reason, we offer it at a special price. The list price for this Ultra Vent hood is €3,696 net. Service: We will gladly assist you in finding a certified Rational customer service provider. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new equipment. We will be happy to advise you on all appliance types. Our used equipment service for you: * 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * Professional overhaul/inspection & expert cleaning * Inspected & fully functional - or your money back * Flexible shipping or self-collection options * Competent advice - before and after purchase * Provision of operating manuals, connection diagrams & spare parts * Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and removes vapors. Complex measures for exhaust system installation are a thing of the past. An external connection is completely eliminated. Installation is simple and can even be done retroactively. Technical data: * W x D x H: approx. 854 x 1226 x 470 mm * Power connection: V: 230 / Hz: 50-60 * Weight: approx. 55 kg * Serial number: DT1UE18105029734 Bledpfx Ajzu Sffjcnel * Year of manufacture: 2018 Condition: used, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. Sales are subject exclusively to our general terms and conditions.

Condition: new, Year of construction: 2015, Complete Knapp Fastline System RA2519 _____ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. _____ The system at a glance Feature Description Manufacturer KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Bjdpfxezwylrs Acnjll Roller Width 450 mm Accumulation space 720 mm Conveyor speed 0,75 m/s RollerDrive curves 11 units Interroll DriveControls 277 units available _____ High-quality industrial design The KNAPP Fastline series is one of the proven modular conveyor systems for automated material flows. The system was developed for the continuous transport of cartons and containers and is suitable for use in: • Distribution centers • Shipping logistics • Production logistics • E-commerce • Replacement or expansion of existing conveyor systems Thanks to its modular design, individual conveyor sections can be used just as easily as complete system components. _____ Scope of Delivery The scope of delivery includes, among other things: Conveyor Technology • Approx. 300 meters of roller conveyor systems • Accumulation roller conveyors • Drive roller conveyors • Conveyor modules of various lengths • Conveyor curves Curves • 11 RollerDrive curves Drive Technology • 277 Interroll DriveControls EC310 Steel Structures • Extensive support columns • Column bases • Connecting elements Pneumatics • Pneumatically controlled accumulation stations • Pneumatic assemblies • Sensors Documentation • Original KNAPP parts lists • Transport and package lists • Documentation of the main assemblies _____ Technical Concept The system is based on the modular KNAPP Fastline system. The material being conveyed is transported on roller conveyors. The storage bins are pneumatically controlled. Thanks to the modular design, conveyor routes can be easily extended or adapted to new warehouse layouts. A key advantage is the use of commercially available industrial components, ensuring that replacement parts will remain available in the future. _____ Premium Manufacturer KNAPP is one of the world\'s leading manufacturers of automated material flow systems. The system is not a custom-built or specially designed solution, but rather based on an industrial mass-production platform. _____

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Special Features: - Easy operation - Excellent price-performance ratio - Optional winding station / automated cushion roll production - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: - Free technical hotline Bledszr Hxuspfx Acnsl - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Condition: refurbished (used), functionality: fully functional, Equipment: CE marking, Used, fully overhauled bridge milling machine, restored to like-new condition with all parts replaced. The Axia from Gmm has always been synonymous with reliability, robustness, precision, and ease of use. It can accommodate a disc up to 1200mm. The complete control unit (cabinet with display + PLC + module – see photo) has been sent to the manufacturer for inspection, revision, and data/program updates. The table is motorized and can rotate. Bljdozxg Hrepfx Acnol

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak hours, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers can be easily transported. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. It has only been operated with a water softening system, so there are no limescale deposits in the system. The matching drip tray for dispensing coffee is not shown in the picture, but is also included. The base cabinets shown in the pictures are not included in the offer, but can be purchased as an optional extra. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 standard. Technical data: W x D x H: approx. 1173 x 600 x 947 mm Model with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Bjdpfx Acezxn Auensll Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further information: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water dispensing: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, thoroughly inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: refurbished (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, quill stroke: 85 mm, total length: 1,800 mm, total width: 1,300 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,100 kg, Dear Sir or Madam, Bsdpfx Aceztf A Uensll We are offering for sale a Weiler Condor B lead and draw spindle lathe in fully refurbished condition! This model is particularly distinguished by its extremely user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B is in the size range between the Weiler Praktikant and the Weiler Commodor and is therefore a true all-rounder in any workshop. The machine will undergo extensive refurbishment in our workshop, so that it will be in like-new condition both technically and visually! The following work will be carried out during the refurbishment of the machine: - Basic cleaning - Repainting - Overhaul of the guideways - Replacement of all lubricants - Replacement of all standard parts such as handles, buttons, screws, etc. - Replacement of all wear parts such as belts, chains, wipers, etc. - Replacement of all electronic components such as contactors, transformers, switches, etc. - Documentation with test report, parts list, and geometry report Availability: upon request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mounting: short taper DIN55027 size 5 with bayonet lock Quill stroke: 85mm Spindle speeds: 22-2800 rpm Possible thread types: metric, inch, module, diametral pitch Metric thread pitches: 0.18 - 28mm Spindle brake: can be switched on Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional equipment and accessories: chuck guard (NEW), coolant system, 2x emergency stop, lead and draw spindle cover (optional), K+C digital display NEW (optional), operating manual, technical documents, and much more on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are workshop-tested at least. - All lubricants and any worn parts will be replaced beforehand - If desired, we will completely or partially overhaul the machine of your choice - If desired, we will repaint the machine of your choice in your desired color - If desired, you can order additional accessories such as tools, etc. directly with your order - If desired, we can install additional accessories such as safety devices, etc. - We will be happy to take care of the shipping and/or delivery

Condition: used, mileage: 133,344 km, power: 100 kW (135.96 HP), first registration: 01/2004, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency / Federal Police. Configured as a bus (group vehicle) MR / high roof with full climate control and auxiliary heater, ABS and differential lock on the rear axle, as well as a retarder, which is an electric, wear-free eddy current brake for speed adjustment. The windshield will be replaced with real glass before sale. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear part of the vehicle can remain. Furthermore, before the sale, the bases and deflectors of the former roof-mounted rotating lights will be removed. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Also, for the sale, we will remove the rear wooden cabinets. This also creates space for a camper van conversion. Technically, this Vario is in good condition and does not require any immediate repairs – it has been regularly serviced according to the service schedule. All components, such as the engine, transmission, and rear axle, are dry. The air conditioning and auxiliary heater are functioning and very effective: 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulation heater with convector vents in the passenger compartment for draft-free heating. Maximum speed Vmax according to the vehicle registration document: 120 km/h. A total of 11 seats, the seats in the passenger compartment are designed as reclining seats – with adjustable backrests and armrests, and the left inner seats can be moved approximately 10 cm forward on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (L x W x H). For an additional charge of €750, we can perform a technical modification to convert it into a camper van, which would involve removing some seats. Blsdpfszthrljx Acnel Due to space constraints, up to 8 seats are possible in this configuration. In this context, the Vario will also receive a 220V external power connection. However, the Vario would also be roadworthy without these body modifications; it drives well, and the transmission shifts precisely. +++ Errors, changes and prior sale reserved.

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, manufactured in 2021 by the premium manufacturer Rational (successor to the VCC 211). A major inspection was carried out in our in-house workshop, and the iVario L is in excellent condition. The offer does not include any accessories, but they can be purchased separately for an additional charge. The list price for this unit is €19,976 net = €23,771.44 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21038052776 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional Further details: Integrated 230 V socket Integrated hand shower with automatic retraction and spray dosing High-quality pot base, seamless with rounded corners Core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable Integrated hose shower on the unit Integrated water drain in the pot Temperature unit adjustable in °C or °F Cooking pot can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Including base unit with plastic feet Functions: Manual mode (30°C-250°C): adjust liquid temperature, adjust pot base temperature, adjust oil temperature Automatic, liter-accurate water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and frying) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Blsdozvndtepfx Acnjl Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (AGB).

Condition: new, functionality: fully functional, empty load weight: 683 kg, maximum load weight: 2,017 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,535 mm, loading space width: 2,150 mm, tire size: 195 / 50 R 13C, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Unideck Plus 450/2 S 2.7T NEW VEHICLE Internal dimensions: 453cm x 215cm Total weight: 2700kg Payload: 2017kg Braked 2-axle trailer Overrun brake and parking brake from KNOTT or AL-KO 2x 1350kg axles and brake with automatic reverse function Suitable for transporting longer vehicles Low chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail channel Numerous tie-down points along the entire length Reinforced 13" C tires with steel valve M+S tires 13-pole plug Side marker lights Rear lights with reversing light and triangular reflectors Winch with brake and bracket 2x wheel chocks Bledpozvb N Nsfx Acnol OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with bracket -Complete LED lighting -Anti-theft device -Replacement of steel rail with aluminum rail -Wheel stops -Folding crank-operated rear supports -Anti-sway coupling Further accessories available upon request! Plus shipping to Gera and vehicle registration document €250 net Images are examples and may show accessories that are subject to an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come by directly!

Year of construction: 2020, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro 2-XS from premium manufacturer Rational (successor to the VCC 112T). The iVario Pro 2-XS is offered including basic accessories and a base unit. The Vario Cooking Center is in excellent condition. These are example images; actual images will follow shortly. The unit is available from approximately week 35. The list price for this unit is: €11,980 net / €14,256.20 gross The list price for the base unit is: €1,227 net / €1,460.13 gross Our price: €7,500 net / €8,925 gross You will receive an invoice with VAT shown. Service: We will gladly connect you with a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational device type? Ask us; we have access to a wide range of used and new equipment. We will gladly advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. • High-quality brand-name equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: 1100 x 756 x 485 mm Bljdpfxszvwqie Acnel • Power connection: V: 400 / kW: 13.7 / Hz: 50-60 • Serial number: E07VK20068047700 • Year of manufacture: 2020 • Capacity: 2 x 17 liters Additional features included: • iZone Control • Low-temperature cooking • Socket (Type F) • WiFi • Ethernet and USB interface Condition: Used, major inspection performed and fully functional Additional information: • Integrated hand sprayer with automatic retraction and spray dosage • High-quality pan base - seamless with rounded corners • Core temperature sensor with 6 measuring points • 1,200 programs, each with up to 12 programmable and nameable steps • Integrated hose sprayer on the unit, integrated water drain in the pan • Temperature unit adjustable in °C or °F • Cooking pan can be tilted • Lid with integrated water inlet • Automatic display of service messages • IPX5 splash water protection • USB interface for HACCP data output and updates Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 8 kg, warranty duration: 24 months, type of input current: DC, feed length X-axis: 3,400 mm, space requirement length: 3,700 mm, table height: 160 mm, space requirement width: 140 mm, welding current (max.): 3 A, power: 0.072 kW (0.10 HP), Equipment: CE marking, documentation/manual, Pedante is an automatic digital length stop for miter and compound miter saws. It is designed for workshops where many parts are cut to the same length, where cutting lengths change frequently, or where manual measuring takes too much time during repeated work. The required length is entered on the touchscreen, after which the motorized stop automatically moves to the set position. This reduces manual measuring, shortens setup time, and helps improve cutting accuracy in day-to-day production. The system is suitable for joinery shops, furniture production, window and door manufacturers, and workshops processing aluminum, PVC, wood, plastic, LED profiles, and other linear materials. Pedante can be mounted on either the left or right side of the saw and can be installed as a retrofit solution on many existing saw setups without replacing the machine. It supports millimeters and decimal inches, monitors its position automatically during operation, and is built for professional workshop use. Bledpfezumkpex Acnol Several models are available depending on the required working length, from 1,040 mm to 5,760 mm. The system is useful for repeated cuts, batch production, custom-length parts, and work where accurate material positioning is important. Prices range from €1,440 to €2,040 excl. VAT, depending on the selected model and working length.

Year of construction: 2025, condition: ready for operation (used), functionality: fully functional, Designed to perform high-precision slotting and die-cutting processes on cardboard sheets. Its semi-automatic system allows for a high degree of operator control. With a working length of 2800 mm, it is suitable for handling large parts, optimizing the manufacturing process of boxes and packaging. Configuration: - Conveyor chain for indirect paper feeding Bledpfx Aozugtqscnsl - 40 mm lateral movement via gear transmission; replaceable and wear-resistant polyurethane rubber - Rollers with surface grinding, chrome plating, and precise alignment. Shaft cores made of 20# steel.

Condition: used, Year of construction: 2025, This is an external, dual-chamber water softening system manufactured by Hobart, model Hydroline Protect SD-H, year of manufacture 2025. The system has undergone a fresh inspection in our in-house workshop and is fully functional. The list price is €2,395 net / €2,850.05 gross. Our price: used, year of manufacture 2025: €1,290 net / €1,535 gross. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Testing according to DGUV V3. Technical data: Dimensions: W x D x H: 360 x 360 x 585 mm Weight with/without packaging: 21/19 kg Maximum water hardness: 40°dH Salt tank capacity: 20 kg Salt consumption per regeneration: 0.5 kg Continuous flow rate: 2-20 L/min Temperature: min. 2 / max. 65°C Condition: used, inspected, fully functional. Customer benefits: Bjdozt Idnspfx Acnell Optimally protects all downstream machines from limescale - extends maintenance intervals and service life. Cost-effective, external water softening system. Compact dimensions, removable castors. No power connection required. The system is regenerated in parallel with the rinsing process. The water softening system provides softened water 24 hours a day. Basic model: A high-quality ion exchanger removes the limescale-forming minerals from the water and adds water-soluble sodium salt in an exchange process. The total hardness of the raw water is thereby reduced to 0°dH. The water softening system consists of a pressure-resistant and corrosion-resistant tank. Tank material: plastic. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 3,050 mm, total height: 4,000 mm, overall weight: 32,450 kg, warranty duration: 12 months, hopper volume: 4,000 l, rotor diameter: 750 mm, rotational speed (max.): 12 rpm, rotational speed (min.): 5 rpm, blade width: 75 mm, power: 150 kW (203.94 HP), rotor width: 1,800 mm, Genox X1800 Twin Shaft Shredder, suitable for shredding various types of materials including tyres, metals, plastics, wood, packaging materials, household & construction waste etc. Bodpfoztv T Rex Acnell Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 75kW (150kW Total Power) drive motors and oversized, heavy duty reduction gearboxes as standard. Providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Segmented blades with replaceable tips are available as an option.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total width: 1,225 mm, total height: 1,850 mm, overall weight: 1,470 kg, warranty duration: 12 months, hopper volume: 550 l, rotor diameter: 276 mm, rotational speed (max.): 13 rpm, blade width: 20 mm, power: 7.5 kW (10.20 HP), rotor width: 400 mm, Genox M400 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with a 7.5kW drive motor and oversized, heavy duty reduction gearbox providing high torque, low speed operation. Bledoztwhcepfx Acnel Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² Bjdpfx Aezt Dmrecnsll UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 4.000mm nett belt width 600 mm adjustable speed sediment removal system filter Bjdpfx Acezxq Dujnsll mechanical hoists overall dimensions (l x w x h) : ± 6.000 x 2.200 x 2.200 mm with oil circulation pump Full mechanical overhauling: New screen filter for internal oil filtration New bearings, chains, seals, slide bushings, gears, … Motors/gearboxes completely overhauled or new replaced Oil bath fully re-insulated New grill belts, standard dimensions for snack products (to be discussed depending on product and customer specifications) All wear-sensitive parts replaced or fully refurbished General cleaning, overhaul, and structural inspection Full electrical overhauling + update of electrical cabinet and control: All electrical components and cables replaced OEM TST PLC control system or conventional push-button control system with Jumo PID temperature controller New electrical diagrams (E-Plan) New sensors Component and cable coding

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented Bedpfx Acezu Tu Ionjll CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E61SI17032579879, This is an SCC 61 WE combination steam oven in an electric version, manufactured by the premium brand Rational, built in 2017. The unit will be completely overhauled in our in-house workshop, and the combination steam oven is fully functional. The base shown in the picture is not included in the offer but can be purchased as an option. AVAILABLE FROM WEEK 35!! The recommended retail price is €9,400 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational equipment type? Ask us; we have access to a large range of used and new equipment. We will gladly advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combination steam oven offers space for 5x 400x600mm trays. In automatic mode, the unit automatically detects the ideal cooking path, the size of the food, the quantity loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845x850mm Power connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6x 1/1GN Weight: approx. 110 kg Serial number: E61SI17032579879 Year of manufacture: 2017 Condition: used, completely overhauled, fully functional Further details: In combination steam oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control – self-cleaning system Core temperature sensor Handheld spray nozzle with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Bodpjzw H Slofx Acnsll Automatic start time selection 7 cleaning levels for unattended cleaning – even overnight Moistening adjustable in 3 levels – from 30°C to 260°C 5 programmable proofing levels USB interface Joint-free, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).