Used Remaining Bread Chopper for sale (1,718)

Condition: good (used), New Holland T7 210 Year of manufacture: 2018 Approx. 3,800 operating hours Front hydraulics Front PTO GPS preparation Tires approx. 80% remaining Air pressure system 4 double-acting control valves at the rear 2 double-acting control valves at the front Gbsdpfe Ahuarex Ah Eew Load sensing K80 ball hitch Automatic trailer coupling Valid inspection certificate until 08.2027 Turbo and service performed new 250 hours ago! In top maintained condition!

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,474 mm, total height: 2,547 mm, loading space length: 3,533 mm, loading space width: 1,784 mm, loading space height: 1,886 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 4659.TZ25.RA02292 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Airbag (passenger side) * Interior rearview mirror incl. heated rear window * Load compartment protection package 1: "Easy Clean" load compartment floor - wheel arch lining - high side wall lining * LED lights in the load compartment * Socket: 12-volt connection in the load compartment (D-pillar) * Partition (metal) with window * Central locking with remote control - additionally with a second, foldable key with remote control FURTHER EQUIPMENT * 1 battery * Axle load increase - front to 1850 kg * Airbag, driver side * Anti-lock braking system with electronic brake-force distribution incl. ESP with traction control - hill start assist - crosswind assist - safety brake assist - rollover protection - emergency brake assist incl. emergency brake light * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Battery: battery runtime, programming of battery runtime to 10 min * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO-Mode * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light Godpfx Aezyd Dwoh Esbw * Power windows - with quick-down/up function for driver's side * Ford Easy Fuel - comfort fuel filler flap and misfueling protection * Generator, high-performance version * Glove compartment with lockable lid * Interior lighting with delay function with reading lamps in the front * Air conditioning in the front incl. dust and pollen filter * Fuel tank 70 l * Load compartment lighting * Steering wheel: artificial leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Emergency call assistant * Package: Technology package 9 - windshield, heated - windshield wipers with rain sensor - front and rear parking pilot system - active emergency brake assist (camera-based) - lane-keeping assist with driver fatigue warning and automatic high beam assistant, additionally with lane departure warning - headlight assist with day/night sensor - cruise control - fog lights - Ford audio system * Particulate filter: diesel particulate filter * Radio: Ford audio system with radio and DAB+ - MyFord Dock - FordPass Connect - speakers, antenna - audio remote control on the steering wheel - Bluetooth interface - USB connection - hands-free system * Wheels: wheel covers * Wheels: tire repair kit * Wheels: steel wheels 6.5 J x 16 with 235/65 R 16 tires * Headlights - dipped beam: halogen headlights with daytime running lights * Sliding door entry light automatically when the door is opened * Sliding door, right * Mud flaps, rear * Side protection strips * Power steering * Safety belts - seat belt pretensioners and force limiters in the front * Seats: seat package 13 - driver's seat, 4-way adjustable - double passenger seat with storage compartment under individually folding seat cushions - headrests, height-adjustable - tray integrated in the double passenger seat (fold-out) - interior armrest for the driver - lumbar support, manual (driver's seat) - seat cover: fabric * Start-stop system * Rear bumper with integrated step * Partition (plastic) at the height of the B-pillar * Recirculation mode * Lashing eyes * Immobilizer * Heat-insulating glazing, lightly tinted * Central locking with remote control * Second key with remote control * Overhead

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 10,419 h, load capacity: 3,500 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, power: 44 kW (59.82 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 40 - 60% Rear tire type: Solid rubber Gbsdpfs Aa Hbvex Ah Ejw Rear tire condition: 60 - 80% Description: LINDE H35D diesel forklift, 5 tons lifting capacity - - Year of manufacture: 2013 - - 10,419 operating hours - - - Side shifter - - - Fork positioner - - - Triplex free-lift mast - - Overall height: 2.20m - - Lifting height: 4.80m - - 4-cylinder VW diesel engine, TURBO, 60 hp - - Solid rubber tires, approximately 50% remaining - - - FULL CABIN - - - Heater, lighting system - - AIR CONDITIONING - - Double pedal configuration - - AIR-SUSPENDED SEAT - - 5025 kg dead weight - - - 4-cylinder VW turbo diesel engine, 60 hp - - - Forklift in GOOD condition! Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning.

Condition: used, mileage: 22,000 km, power: 162 kW (220.26 HP), first registration: 10/2002, overall weight: 14,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 02/2027, gearing type: mechanical, emission class: euro3, loading space width: 2,460 mm, loading space length: 4,000 mm, loading space height: 2,500 mm, Year of construction: 2002, total length: 8,400 mm, total width: 2,500 mm, total height: 3,450 mm, Equipment: ABS, all wheel drive, First owner. 22,000 total kilometers with original inspection certificate. First owner: Voluntary German fire department. Always registered until November 2026. Euro 3 diesel engine, MAN inline six-cylinder, 6871 ccm. 6-speed manual transmission. Gedpfxo Aix Tce Ah Ejbw 96 km/h. All-wheel drive with 2 differential locks (front and rear). ABS. Fire engine LF 16/12 with modern body. Year of manufacture 2002. Integrated ambient lighting. Wide crew cab METZ-AS (combined steel and aluminum construction, Metz-FGL, now Rosenbauer). 9 seats. Hydraulically tilting spacious cab with 4 doors. 1900 liter water tank. With electric tank heater. Rear pump Rosenbauer FP 16/8 (only 118 operating hours). TS extension with 220 kg load capacity on the front right, further storage and pull-out units according to standard, quick-attack system with dimensionally stable hose. Traffic warning system Boese TriBlitz 3 (can be switched on directly by the driver). Light mast GEROH with 2 spotlights, mounted between cab and crew cab. Small ball-type trailer hitch with 2000 kg trailer load (braked) or 1500 kg (unbraked). Connections for 12 V and 24 V. Robust chassis with full leaf spring suspension and approximately 3.85 m wheelbase. A parking heater was previously installed, but it has been removed. The WEBASTO sticker is still on the vehicle. Retractable hose reels from ZIEGLER, both included in the offer, with hose material. Total vehicle length with the 2 reels = 8400 mm. Vehicle overall external dimensions (dimensions without reels!): Length 7.70 m / Width 2.50 m / Height 3.45 m. Unladen weight: 8395 kg. Permissible total weight: 14000 kg. The pure box/fire engine body has the external dimensions approximately 4.00 m long / 2.46 m wide / 2.50 m high. Complete special signaling system with roof beacon and front flashers, operational, can remain for emergency services. The registration type is currently "Other motor vehicle, fire engine LF 16/12". This fire engine has valid inspections. TÜV (technical inspection) until 02/2027 and SP (gas inspection) until 02/2028. Both inspections were carried out "without any defects found" and recently (the gas inspection was performed at 21,813 km). Original EC declarations of conformity are available for the body (Metz-FGL) and the light mast (GEROH). 2 original MAN keys are included, suitable for all doors. A radio, original MAN, is also installed. The diesel tank holds 125 liters. This fire engine was driven to us without any problems on the highway for a good 400 km in November 2026. The MAN is immediately available. This offer is only valid for commercial businesses and freelancers, as well as for authorities/emergency services of all kinds. Sale to private end consumers is unfortunately not possible. Subject to prior sale and errors. The purchase price is the final price, gross = net, without separate VAT (sale according to §25a UStG / so-called differential taxation).

Condition: used, mileage: 656,928 km, power: 331 kW (450.03 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 41 m³, loading space length: 7,100 mm, loading space width: 2,460 mm, loading space height: 2,350 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Scania R 450 LB 6x2?4MSA VIN: 9224161 Chassis / Components: * Wheelbase: 4,600 mm / 1,350 mm * Leaf / Air Suspension * Lift axle // Steerable axle * Tires: 1. 385/55 R.22.5 2.+3. 315/70 R 22.5 * Remaining tread depth: Front ~20/30% Middle ~40/70% Rear ~80/30% * 1 x Aluminum tank 500 L * 1 x AD-Blue tank * 1 x Hydraulic tank * 1 x Bawer stainless steel storage box Cab: * CR 19 H Highline * 2 x Beds * Automatic climate control * Auxiliary heater * Refrigerator * Radio CD // CB radio * USB, AUX, BT * Navigation * Distance control Body: * HGE Grain Tipper * Standing platform * Roll tarp * Side boards 800 mm * Folding center beam * Tarp on the inside * Body dimensions: 7,100 mm x 2,460 mm x 2,350 mm * Load volume: approx. 40 m³ * Grain slide Engine / Transmission: * 12,742 ccm // 450 hp / 331 kW // EURO 6c * Opticruise / Automatic * Scania Retarder * Differential lock Weights: * Gross vehicle weight: 26,000 kg * Tare weight: 11,680 kg * Payload: 14,320 kg Other: * German vehicle * 1 previous owner ----2-Axle HGE Three-Sided Tipper Grain Trailer TYPE: AK 18-3 VIN: 1HA0179 First registration: 17.02.2010 Chassis / Components: * 2 x SAF axles with disc brakes * Air suspension * Lifting and lowering, front + rear * Tires: 385/55 R22.5 * Remaining tread depth: Front ~20% Rear ~40/50% * Aluminum rims * 2 x PVC storage boxes Body: * HGE Grain Three-Sided Tipper * Standing platform with ladder on the right * Roll tarp * Load volume: 7,100 mm x 2,460 mm x 2,350 mm * approx. 40 m³ * Side boards 800 mm * Folding center beam * Tarp on the inside for bulk cargo * Grain slide Weights: * Gross vehicle weight: 18,000 kg * Payload: 13,770 kg * Tare weight: 4,230 kg Other: * 1 previous owner * German vehicle * New brake discs, new brake pads + 1 brake caliper front axle 08 / 2025 ---- New main inspections / safety tests or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the areas of refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. You will find a variety of vehicles on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Godpjzv Akhofx Ah Esbw Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / Export license plates We will gladly help you obtain export license plates/short-term license plates. Handling of customs formalities We will gladly help you with the handling of customs matters.

Condition: used, mileage: 958,671 km, power: 405 kW (550.65 HP), first registration: 02/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, Volvo FH 550 Globetrotter 4x2 | VEB+ | Auxiliary Heater | ACC | Lane Keeping Assist VIN: 854978 CHASSIS / COMPONENTS * 4x2 semi-trailer tractor * Leaf/air suspension * Wheelbase: 3,800 mm * 15-pin electrical connector * 2-wire connector * NATO socket 24 V * RIVO ICE 3 intercooler compressor ENGINE / TRANSMISSION * 405 kW (550 hp) * 12,777 cm³ displacement * Euro VI C * Automatic transmission * VEB+ engine brake CABIN / DRIVER’S CAB * Globetrotter cab * 1 bunk * Automatic climate control * Auxiliary heater * Parking heater * Refrigerator * Cruise control * Adaptive cruise control (ACC) * Lane keeping assist * Radio * Bluetooth hands-free system * Leather multifunction steering wheel * Navigation preparation Gedpfjzhdciex Ah Eebw WEIGHTS * Permissible total weight: 18,000 kg * Unladen weight: 7,991 kg * Payload: 10,009 kg TIRES * Axle: 385/65 R22.5, remaining tread approx. 80% / 50% * Axle: 315/80 R22.5, remaining tread approx. 80% / 50% OTHER * German vehicle * MOT: 11/2026 * Inspection: 05/2027 New main inspections / safety checks or weight adjustments are possible upon request. We will gladly assist you in obtaining export/transfer license plates; we can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a large selection of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide you with a competent contact person who will assist you in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading vehicles We will gladly help you with loading your purchased vehicles. Organizing special transport We will gladly help you with organizing special transport. Short-term registration / export license plates We will gladly help you with obtaining export license plates / short-term registration. Handling customs formalities We will gladly help you with handling customs matters.

Condition: good (used), operating hours: 4,085 h, machine/vehicle number: 764973, mast type: telescopic, fuel type: diesel, color: other, General information Year of manufacture: 2016 Drivetrain Drive: Track Make of engine: Yanmar Weights Empty weight: 8.200 kg Functional Lifting capacity: 250 kg Working height: 1.600 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Gbjdpfo Ahvyzjx Ah Esw Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Max. horizontal reach: 1400 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Latest inspection: 2026-12-12 Production country: JP Additional information Please contact Martyn Joosse for more information

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Gedpfx Asy Au I Ujh Eobw Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 235 h, load capacity: 230 kg, mast type: telescopic, lifting height: 15,700 mm, lifting power: 230 kg/m, platform length: 760 mm, platform width: 1,550 mm, overall weight: 7,112 kg, empty load weight: 6,882 kg, transport length: 6,500 mm, transport width: 1,700 mm, transport height: 1,980 mm, construction height: 1,980 mm, fuel type: hybrid, fuel tank capacity: 50 l, tire size: 240X55 D17,5, tire condition: 100 %, drive condition: 100 %, wheelbase: 2,050 mm, ground clearance: 160 mm, color: orange, 🚀 JLG M450AJ HYBRID | 2017 | 235 Hours | Articulating Boom Lift 🔹 JLG M450AJ Hybrid articulating boom lift for sale, in excellent technical and cosmetic condition. This 2017 machine has exceptionally low operating hours, only 235 hours from new. Following a comprehensive technical inspection, it is fully operational and ready for immediate use without any additional investment. 📋 Technical Specifications 🏭 Manufacturer: JLG 🔧 Model: M450AJ Hybrid 📅 Year of Manufacture: 2017 ⏱️ Operating Hours: 235 hours ⚡ Drive Type: Hybrid (Electric + Diesel) 📏 Working Height: 15.72 m 📐 Platform Height: 13.72 m ↔️ Horizontal Reach: Up to 7.89 m 🏋️ Platform Capacity: 230 kg 🚜 Type: Self-Propelled Articulating Boom Lift ✅ Features and Benefits Gbodpfx Ahs Ahwmqe Esw ✔️ Hybrid drive system – ideal for both indoor and outdoor applications ✔️ Quiet and emission-free operation in electric mode ✔️ Excellent horizontal reach thanks to the articulating boom design ✔️ Proportional controls for precise and smooth operation ✔️ Non-marking tires ✔️ Compact transport dimensions ✔️ Ideal for installation, maintenance, servicing, and construction work 🏭 This machine is perfectly suited for warehouses, logistics centers, industrial facilities, production plants, commercial buildings, and construction sites. ⭐ With only 235 operating hours from new, the machine shows minimal wear and remains in outstanding condition. It is one of the lowest-hour JLG M450AJ Hybrid units currently available on the used equipment market. 🤝 Why Choose FT Logistics? FT Logistics specializes in the sale of forklifts, sideloaders, multidirectional forklifts, warehouse equipment, and material handling machinery. We provide carefully selected equipment, professional technical support, and expert advice to help customers choose the right machine for their specific requirements. 📦 Our inventory includes a wide range of equipment from leading manufacturers, available for immediate delivery. 🌍 Our Services 🚛 Transport arrangements throughout Europe 📄 Assistance with export procedures and documentation 🔧 Technical support 💻 Online machine presentations 📸 Additional photos and videos available upon request 📞 Please contact us for further information, pricing details, or a tailored offer. We offer a wide selection of forklifts, sideloaders, multidirectional forklifts, and warehouse equipment to suit a variety of industries and applications. 🏢 FT LOGISTICS Quality You Can Rely On. Service You Can Trust.

Condition: used, Year of construction: 2017, machine/vehicle number: 930048019, power: 32.8 kW (44.60 HP), input voltage: 380 V, total length: 2,878 mm, total width: 1,441 mm, total height: 2,682 mm, overall weight: 1,797 kg, number of chambers: 4, number of shelf rows: 4, control type: manual, fuel type: electric, BONGARD ORION Series Electric power 4 openings on 4 baking levels 1 baking path per level Deck dimensions 800x1800mm Integrated loading elevator Total baking area 5.8 m² Year 2017 Electrical power 32.8 kW Power supply 400 V Serial No. 930048019 Electrical protection 80 A Independent ERGOCOM control per level Refractory soles, 20 mm thick Stainless steel electric heating elements Heating element protection in the arch Independent steam generator per level Individual water dosing per level Steam injection from the rear Anti-splatter steam diffuser Internal chamber lighting Removable glass doors Brushed stainless steel facade External dimensions 1441x2878x2682 mm Weight 1797 kg Used electric deck oven, 4 openings, BONGARD ORION EvO E801/4-180 – 5.8 m² baking area General description The used electric deck oven with 4 openings, BONGARD ORION EvO E801/4-180, is intended for bakeries and baking-pastry workshops seeking baking on fixed decks. This model, also referenced as 801/4.180 in the manufacturer's documentation, has 4 baking levels, with a baking path of 800 mm in width and a deck depth of 1,800 mm. Its total baking area of 5.8 m² allows for organizing batches on multiple levels. Designed for bread and viennoiserie production, this electric oven combines refractory decks, heating elements, and independent steam generation per level. Gbedpe Ahym Uefx Ah Eew

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, overall weight: 10,000 kg, loading space length: 1,300 mm, loading space width: 1,000 mm, total height: 3,400 mm, total length: 3,500 mm, total width: 2,000 mm, power: 90 kW (122.37 HP), input voltage: 380 V, rotary shear 2 shafts - 2 motors 45kw - inversion in case of jam - shredding chamber 1300 x 1000 - thickness of new knives 55 - 4 tons - large loading hopper - possibility of loading very versatile and very powerful, can pre-grind organic matter for methanizers, copper cables, lumps, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, hollow bodies, etc. use to grind up sick calves at the renderer. Gjdj Ahrp Rspfx Ah Eebw

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,591 mm, total width: 2,438 mm, total length: 2,991 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 30 kWh, DESALINATION PLANT HF-RO: ULTRAFILTRATION AND REVERSE OSMOSIS ON A SKID The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity. PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C) - Inlet flow: 5.0 m³/h - Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation - Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water) - Inlet temperature: +2 to +33 °C - Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l - Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6% PROCESS 1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation 2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce 3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control CLEANING - integrated CIP for ultrafiltration and reverse osmosis - cleaning tank 2 x 100 l with 7.5 kW heater - 3 pneumatic dosing pumps for cleaning agents and chlorine - programmed disinfection, long-term preservation, and re-commissioning Gbeds Ahqpgjpfx Ah Eew EQUIPMENT - materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel - valves in only two nominal sizes, interchangeable pumps, low variety of spare parts - PLC with 15.6" touch panel, Ethernet interface for remote monitoring - control of a frequency-controlled inlet pump - control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65 DIMENSIONS - main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H) - RO module stand approx. 600 x 550 x 1,990 mm APPLICATIONS Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects. SCOPE OF DELIVERY Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description). Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training. NOTE We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,031 h, functionality: fully functional, machine/vehicle number: 9088000015A, feed length X-axis: 1,100 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, controller model: Sinumerik One, workpiece weight (max.): 1,700 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,700 kg, overall weight: 6,950 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,031 h, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, We offer the transfer of a lease (cession) for a used DMG MORI M2 milling machine, including its accessories, for 1 EUR. Machine type: M2 Serial number: 9088000015A Year of manufacture: 2023 (first start-up: end of December 2024) Spindle speed max: 10,000 rpm Weight: 6950 kg X/Y/Z: 1100×550×510 mm Table: 1400×600 mm Spindle: up to 10,000 rpm SK40 Sinumerik One High rigidity thanks to a monoblock bed and a fixed table (maximum load 1700 kg) Included with the machine: 19 toolholders with shanks (mainly Tungaloy), 2 AUTOWELL ATW-689 vices from April 2026, and a tester (all accessories for 1 EUR). First owner Price: LEASE TRANSFER Transfer fee: 0.00 EUR Lease payment: 1340 EUR/month Total amount of payments (24-72) remaining: 64,320 EUR Final buyout amount: 4200 EUR. Loading costs will be covered by us. The price stated in the advertisement represents the total value of the lease agreement. Godpfjz Hl Ihsx Ah Eobw THIS OFFER IS VALID ONLY UNTIL 15.11.2026.

Condition: like new (used), mileage: 10,854 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,682 mm, overall weight: 3,500 kg, empty load weight: 2,669 kg, maximum load weight: 831 kg, operation weight: 2,669 kg, first registration: 10/2020, next inspection (TÜV): 11/2028, loading space length: 3,733 mm, loading space width: 1,780 mm, loading space height: 1,800 mm, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 8.1 l/100km, fuel consumption (combined): 8.6 l/100km, CO₂ emissions: 224 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2020, total length: 6,290 mm, total width: 2,070 mm, total height: 2,580 mm, fuel: diesel, machine/vehicle number: Master L3 4 x 4, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, all wheel drive, all-season tires, car registration, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, immobilizer system, onboard computer, parking heater, power assisted steering, power mirror, sliding door, soot filter, start-stop system, traction control, trailer coupling, truck registration, Master panel van with original 10,000 km, in top condition No rental company – no delivery service – no construction site use All-wheel drive, switchable Gearbox reduction, switchable Euro 6 emission standard – green particulate matter sticker Engine: 2.3 dCI – 96 kW / 131 hp Wheelbase L3: 3682 mm AD BLUE technology ECO function for fuel-efficient driving Air conditioning Auxiliary heater with timer Cruise control Gsdpfx As Ah Sxxeh Eebw Rear view camera ABS – Anti-lock braking system ESP – Electronic stability program ASR – Anti-slip control Brake assist Hill start assist 3 x seats in fabric – double passenger seat with folding table Driver’s seat with height adjustment, armrest, and lumbar support Airbag for driver + passenger Central locking with remote control Electric windows Electrically adjustable and heated exterior mirrors Side marker lights Steering column, height adjustable On-board computer Outside temperature display Gear shift indicator Radio with USB / MP3 / AUX Bluetooth hands-free system LED daytime running lights Heat-insulating glazing Storage compartment above the windshield Storage compartment on the dashboard Power steering 6-speed manual transmission Rear step bumper Cargo area partition with window LED cargo area lighting Full-height cargo area cladding Wooden cargo floor with lashing eyes for securing the load Vehicle overall length: 6290 mm Vehicle height: 2580 mm Cargo area dimensions: 3733 mm long, 1780 mm wide, 1800 mm high Permissible total weight: 3500 kg Payload: 831 kg Trailer hitch can be retrofitted for a towing capacity of up to 3500 kg Vehicle is fitted with very good all-season tires, approximately 90% tread remaining Complete service history, maintenance recently performed MOT and emissions test new Very clean German vehicle in like-new condition, from first owner Truck net price: €29,900 Errors and omissions, subject to prior sale We also offer affordable financing options and warranties up to 24 months, even for commercial users. Commercial vehicles at nutzfahrzeuge-heppenheim.de Email: info-at-nutzfahrzeuge-heppenheim.de

Condition: used, 10-position digital magnetic stirrer without heating, designed for synchronous stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. Speed remains constant, even when load changes Specification: Stirring speed: up to 1200rpm Stirring capacity: 400ml per position Dimensions – 19 x 57 x 6cm (w x d x h) approx Weight – 5kg Good working condition. Please check out our other listings as well. Gedoylwcxepfx Ah Ejbw

Condition: used, operating hours: 2,454 h, power: 210 kW (285.52 HP), color: other, total width: 6,600 mm, working width: 66,000 mm, Year of construction: 2017 Number of cylinders: 6 Serial number: 1ZOT560AH-HR110363 Engine hours: 2454H Threshing hours: 1280H Front tire size: 800/70R32, Michelin Rear tire size: 530/80R26, Michelin Transmission: Pro Drive Straw chopper Cone distributor 4-wheel drive Engine: John Deere Engine power: 285 kW Number of cylinders: 6 Documents: available First put into service: Number of tedders: 5 Equipped with: - Corn harvesting equipment: 8-row corn header Type: 608C Year of manufacture: 2011 Corn upper and lower screens - Grain equipment Cutting bar Type 622R Year of manufacture: 2009 Working width: 6600 mm Transport trailer for cutting unit Grain sieve Camera system Overall dimensions of combine harvester without attachments: approximately 9000 x 3650 x 4000 mm Remarks: signs of wear Online auction of agricultural, earthmoving, and landscaping equipment, including the FENDT 720 Vario, 828 Vario and Favorit 816 Turboshift tractors, NEW HOLLAND T7.260 and T8.420 tractors, MASSEY FERGUSON 9S.425 EX/DYNA-VT tractor, JOHN DEERE 6210R and 7280R tractors, PÖTTINGER Novacat V10000 ED CL rotary mower, JOHN DEERE T560i combine harvester, CLAAS Quadrant 2200RC baler and Rollant 455 RC UNIWRAP baler-wrapper combination, HITACHI Zaxis 160 LC-3 / 180 LC / 300 LC / 350 LC excavators, HITACHI ZW180-6 wheel loader, SCHAEFF / TEREX TW95 tracked excavator, GEHL AL750 wheel loader and RT105EU skid-steer loader, FAUN AFT 50-3 mobile telescopic crane, XCMG XGA16E articulating boom lift, JLG aerial work platforms, RECORD P33T dump truck, KUHN HR6004 rotary harrow, LEMKEN Polaris fertilizer spreader, AMAZONE and KVERNELAND precision seeders, GREENTEC HS252 hedge trimmer, UNI CARRIERS reach trucks, MITSUBISHI electric pallet trucks, AGRINOVA scarifiers, FERRARI garden tractors, STIHL and AMBROGIO robotic mowers, and various other agricultural, construction, gardening, and warehouse machines, etc. The online auction opens Tuesday 20 October and closes Tuesday 17 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 24 November Godpfxe Adz R He Ah Esbw - Thursday 26 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030716, type of input current: three-phase, total length: 18,000 mm, total height: 4,000 mm, total width: 5,000 mm, input voltage: 400 V, overall weight: 8,000 kg, compressed air connection: 1 bar, control cabinet length: 600 mm, control cabinet width: 1,600 mm, control cabinet height: 1,800 mm, year of last overhaul: 2025, Machine Description Sano Sp. z o.o. offers for sale a used technological line consisting of two automatic bagging machines from the Arodo brand (Belgium) and an automatic palletizer. The equipment is designed for the automatic packaging of bulk materials, powders, and granulated products into bags, followed by their automatic palletizing. The machines were used in daily production and remained in working order until they were replaced with new equipment. The machines are in good technical condition and are ready for further use. Technical specifications: 1. Automatic bagging machines – 2 units - year of manufacture: 2003 - manufacturer: Arodo (Belgium) - weight range: 10–50 kg per bag, - capacity: 600–800 bags per hour, - digital weighing system, - Siemens control system. 2. Automatic palletizer – 1 unit - capacity: up to 1500 bags per hour, - automatic system for arranging bags on pallets, - supports EURO pallets. Key advantages: - robust, industrial design, - automation of the bagging and palletizing process, - capability to package bulk materials and granules, - automated weighing systems, - available technical documentation, - can be used in the food, chemical, construction, and agricultural industries. Gbsdpfxs Aid Sne Ah Esw Dimensions: length 18 meters, width 5 meters, height 4 meters Weight: 8,000 kg Price: 80,000 EUR gross. It is possible to view the machines at the Sano Sp. z o.o. facility after prior arrangement of a date.

Condition: used, Year of construction: 2012, HOMAG BOF 211/52/AP with TBA 330, manufactured in 2012. CNC machining center with automatic loading and extensive clamping devices. Scope of supply: - Flex5 Plus (Flex5+) - Mortise unit Gbedpo Ahzqdefx Ah Eow - Four-spindle unit - All vacuum cups present on the machine, including the separately stored cups - TBA 330 loading system Multi-spanners are not included in this offer and are sold separately. Known service points: partially defective safety step mats; one drilling spindle on the MPU drilling head remains extended; the filter in the vacuum device is missing or has fallen inside. Sold in the condition as described. Available for dismantling from February 17, 2027. Inspection by appointment. Price on request.

Condition: used, functionality: fully functional, mileage: 206,134 km, first registration: 05/2026, fuel type: diesel, empty load weight: 16,114 kg, maximum load weight: 23,886 kg, overall weight: 40,000 kg, tire condition: 70 %, axle configuration: 8x4, wheelbase: 4,400 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, total length: 9,913 mm, total width: 2,550 mm, loading space volume: 11 m³, Equipment: ABS, air conditioning, central locking, differential lock, electric window regulation, Iveco Trakker 410T50 CIFA MK28L concrete pump with 11 cubic meter concrete mixer + 28-meter pump with 4 booms + 4 outriggers + remote control 8x4 leaf-sprung suspension 13-ton front axles differential lock manual transmission auxiliary drive Euro 6 GVW 40,000 kg - payload 23,886 kg Gbodpfx Ahj Aig Nbe Ejw total truck length 9.91 m wheelbase 4.40 m tires 70% remaining 300L fuel tank ABS sun visor electric windows and exterior mirrors air conditioning radio air-suspended driver's seat central locking round lights all information subject to change without notice / errors and omissions excepted

Condition: new, Year of construction: 2026, warranty duration: 2 months, total width: 725 mm, total length: 1,300 mm, total height: 1,300 mm, overall weight: 530 kg, Equipment: CE marking, emergency stop, Altınoluk SM 50 Fixed Bowl Automatic Spiral Mixer – 100 kg Dough Capacity – New, Direct from Manufacturer Description Altınoluk is a manufacturer of bakery and pastry equipment. Our SM 50 fixed bowl automatic spiral mixer speeds up the kneading process in bakeries and patisseries. The spiral arm and the bowl work at the same time, so the dough becomes smooth and even in a short time. This gives bread more volume and a better taste. The mixer suits any business that produces dough-based products. The machine can run in manual or automatic mode, and the mixing times can be set to suit the user’s needs. Key features: Quiet operation: The belt and pulley drive keeps noise low and makes the workplace more comfortable. Two-speed motor: Two speed settings for different types of dough. Timer: A separate time setting for each speed allows automatic operation. Safety: Emergency stop button and safety system on the bowl guard. Stainless steel: The bowl, spiral arm and breaker bar are made of high-quality stainless steel, which is durable and hygienic. Control system: Choice of manual or digital control panel. Technical data: Model SM 50 Manufacturer Altınoluk Dough capacity 100 kg Flour capacity 62.5 kg Bowl dimensions (Ø × D) 700 × 370 mm (170 L) Width 725 mm Depth 1300 mm Height 1300 mm Spiral motor power 3.5 / 5.5 kW (4.7 / 8 hp) – 700 / 1400 rpm Spiral speed 105 – 210 rpm Bowl motor power 1.5 kW (2 hp) – 900 rpm Bowl speed 15 rpm Electrical connection 3P + N + PE Total electrical power 9 kW Control system Manual or digital Machine weight 530 kg Manufacturer advantages: [2]-year warranty Spare parts and technical service support Delivery time: [… days] Domestic and international shipping Gbeds Ai Apyepfx Ah Eew The SM 25, SM 40, SM 75, SM 100 and SM 150 models of the same series are also available. Please contact us for prices, videos and more information.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), cutting height (max.): 335 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30,135 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 1,900 mm, total length: 2,350 mm, total width: 1,450 mm, overall weight: 1,320 kg, table height: 750 mm, Equipment: documentation/manual, MEBA 335 DG double miter bandsaw (semi-automatic) incl. powered chip brush, micro-dosing system, and clamping force adjustment Description: Offered is a MEBAeco 335 DG, a semi-automatic double miter bandsaw manufactured in Germany (MEBA, Westerheim). It is the proven solution for precise miter cuts in workshops and production environments. The machine is robust, easy to operate, and offers excellent value for money. Cutting range: 90°: round Ø 335 mm / flat 500 x 335 mm 45° right: round Ø 330 mm / flat 320 x 335 mm 45° left: round Ø 305 mm / flat 305 x 335 mm Technical data: Saw band: 4400 x 34 x 1.1 mm Working height: 750 mm Digital miter display with 0.1° resolution Patented MEBA miter system: the pivot point remains the same for every angle, thus ensuring exact length measurement Electric saw feed with ball screw spindle Gedpfxs Ai D Dpe Ah Eobw Hydraulic material clamping over the entire stroke Semi-automatic sawing cycle with the steps: clamping, sawing, and return to the pre-set height Additional equipment included in the offered price: Powered stationary chip brush: reliable band cleaning for longer saw band life Micro-dosing system (minimum quantity lubrication): clean cut without coolant emulsion, dry chips, less cleaning effort Clamping force adjustment: material-friendly clamping, even with thin-walled profiles and tubes Mounting elements: for stable and low-vibration installation Price: MSRP 37,915 € / special price 31,500 € net plus VAT, ex works For further information, a demonstration, or a customized offer, I am at your disposal.

Condition: used, power: 96.3 kW (130.93 HP), input voltage: 400 V, total length: 2,490 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 2,320 kg, number of chambers: 4, number of shelf rows: 4, control type: manual, actuation type: electric, fuel type: electric, Omega 2 Range Electric power Number of decks: 4 Number of lanes: 2 per deck Number of openings: 8 Baking width: 800 mm per lane Baking area: 11.8 m² Usable height, upper deck: 225 mm Usable height, lower decks: 180 mm Sole thickness: 20 mm Heating: electric resistance Independent sole and vault temperature control Two temperature probes per chamber Independent HEXA steam generator per deck Pulsed steam injection Electronic touch control Glass doors with removable panes Gsdpfe Ai Dlqjx Ah Eobw Interior chamber lighting Hood with steam extraction Integrated loading elevator Dimensions: 2200x2490x2300 mm Power: 96.3 kW Voltage: 400 V Weight: 2320 kg Used BONGARD OMÉGA 2 802/4 electric deck oven – 8 openings for controlled baking The used BONGARD OMÉGA 2 802/4 electric deck oven is designed for bakeries and production facilities looking for traditional deck baking with the flexibility of electric control. Its configuration includes 4 decks and 2 lanes of 800 mm per deck, totaling 8 openings, allowing for the organization of multiple batches according to the bakery's needs. Designed for the production of bread, pastries, and baked goods, the OMÉGA 2 combines refractory decks, electric heating elements distributed in the chambers, and an independent steam generation system per deck. Its design allows for working with different baking temperatures without constantly using all the chambers.

Condition: used, functionality: fully functional, empty load weight: 6,600 kg, maximum load weight: 31,400 kg, overall weight: 38,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2021, total length: 13,720 mm, total width: 2,550 mm, suspension: air, tire condition: 50 %, color: blue, Equipment: ABS, Viberti M300 Semi-trailer Gbedps Ai E Rasfx Ah Eow 13.60m flatbed with tarpaulin air suspension 3 axles SAF axles GVWR 38,000 kg – payload 31,400 kg Total length of the semi-trailer: 13.72m Tires: 50% tread remaining (385/65R22.5) ABS All information is subject to change without notice and may contain errors.

Condition: used, Year of construction: 1984, The DERITEND ROTADIE 15 is a versatile and robust machine designed for high-quality flexographic printing. Manufactured in 1984, this machine remains in production and is located in Germany. It is equipped with a vacuum feeder and a vacuum dust cleaner to ensure efficient and clean operation. The ROTADIE 15 features four flexo-printing units, allowing for precise and detailed printing capabilities. It supports bottom printing and is enhanced with ceramic rolls and a chamber doctor blade for superior print quality. The machine also includes side track printing units, an electric running register for precise alignment, and an automatic stacker for efficient handling of printed materials. With a maximum sheet size of 1.700 x 1.150 mm and a minimum sheet size of 520 x 600 mm, the ROTADIE 15 can handle a wide range of printing jobs. Its impressive maximum speed of 9,000 sheets per hour makes it a reliable choice for high-volume printing tasks. Format: Max: 1.700 x 1.150 mm min: 520 x 600 mm Equipment: Vacuum Feeder Vacuum Dust Cleaner No 4 Flexo-Printing Units Bottom Printing Gjdpfx Ahjxizdme Eobw With Ceramic Rolls & Chamber Doctor Blade Side track printing Units Electric Running Register Automatic Stacker Max. Sheet Size 1.700 x 1.150 mm Min. Sheet Size 520 x 600 mm Max. Speed 9.000 Sheets per Hour

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Gedpjzdtflefx Ah Ejbw Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.