Used Ras 2000 for sale (69)

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm Bcodpfsdzd Hujx Ahvsw -Weight: 1378 kg

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine Bedody Rhdjpfx Ahvecw -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos Bcodpfx Ahogxgm Hjvsw -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, overall weight: 14,000 kg, working height: 1,000 mm, sheet thickness aluminum (max.): 3 mm, working length: 2,160 mm, TECHNICAL DETAILS Maximum bending length: 2,160 mm Maximum sheet thickness (steel, 400 N/mm²): 2.0 mm Maximum sheet thickness (stainless steel): 1.5 mm Maximum sheet thickness (aluminum): 3.0 mm Minimum bent part length (without corner pieces): 260 mm Minimum bent part length (with 30 mm corner pieces): 450 mm Minimum bent part length (with 50 mm corner pieces): 500 mm Maximum external bent part width: 1,500 mm Minimum internal bent part width: 150 mm Maximum bent part height (four-sided): 203 mm Lateral clearance at the corner pieces: 30/50 mm Clearance in front of upper beam tool: up to 60 mm Bending beam swivel range: 180 degrees Working height: 1,000 mm Bedpfx Ajx Ngpkehvecw MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 7,300 x 2,450 mm Approx. weight: 14,000 kg Maximum drive power: 25 kW Note: The vacuum stacking unit, neck and thread cutting device, and welding fixture visible in the images are not included in the scope of delivery or sale.

Condition: good (used), Year of construction: 1991, Sheet width 2500 mm Sheet thickness 4 mm Cutting angle 1.49 ° Strokes per minute 40-80 Stand projection 200 mm Number of hold-down devices 13 pieces Bcjdpjtq S T Nefx Ahvow Backgauge - adjustable 5-1000 mm Table height 750 mm Oil capacity 85 l Air pressure - required 5 bar Machine weight approx. 3600 kg

Condition: good (used), Here we offer a folding machine with rotary foot punch. Suitable for 4 mm sheet thickness over a length of 3000 mm. Bsdpex Rp T Iofx Ahvecw

Condition: used, Year of construction: 2011, functionality: fully functional, RAS Multibend-Center - Fully automatic bending center Bsdjx Iugnjpfx Ahvscw - Very good refurbished condition - Complete tool set included; the upper beam tools are new - Bending cell with main manipulator, automatic tool changers for the upper beam and bending beam, automatic corner piece actuation, actuation for automatic up/down tools, mechanism for lowering the work surface upon arrival of the next sheet, set of fastening elements, main manipulator, feeder with stop, operator panel including touch PC, RAS Cell-Control software, emergency stop pillar, automatic tool changer with two independently operating gripper arms that fully automatically assemble the required upper beam tool length, grid pieces, adapter pieces, fixed corner piece, rotary base corner pieces - Images are sample images -

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 52/10, working width: 3,200 mm, sheet thickness (max.): 3 mm, empty load weight: 4,400 kg, TECHNICAL DETAILS Sheet width: 3,200 mm Sheet thickness: 3 mm Opening width of the upper beam: 300 mm MACHINE DETAILS Motor power: 4.5 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,300 x 1,750 mm Machine weight: approx. 4,400 kg EQUIPMENT Segmented pointed rail Bjdpfexyv Iuox Ahvocw Segmented gooseneck tool

Condition: used, Year of construction: 2014, functionality: fully functional, MiniBendCenter RAS 79.05 Fully automatic panel bending center for small parts - General Information: Direct from manufacturer Manufacturer’s warranty Maintenance included Latest possible software version - General technical data (in mm): Blank length: 50–600 Blank width: 40–600 Sheet thickness max. (400 N/mm²), tool-dependent: 3.0 Upper beam stroke max.: 500 mm Minimum flange height (reference value, tool-dependent): 5 × s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrics: approx. 2,027 kg Weight of machine elements: approx. 945 kg - Machine-specific data: Motor operated; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine Configuration: Bending cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis + separate drive for rotary axis - Double sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic swivel drive for rotary axis - Tool gripper - Two-level tool magazine - Automatic tool clamping in tool magazine Enclosure: - Bending cell, front and rear Mobile operating panel: - 18" Touch & More control Intelligent loading robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction row (7x20 mm) Bedpsx Hyhuofx Ahvocw Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining parts) Curved transport conveyor with 6 connection stations Finished part output enclosure Complete tool set RAS CAM-Office software incl. SolidWorks license and 2-year maintenance contract - Sample images Sample video available on request -

Condition: used, functionality: fully functional, Year of construction: 2003, FLEXIbend RAS 73.30 - General technical data in mm: Bending length: 3200 mm Maximum sheet thickness (400 N/mm²): 3.0 mm Maximum upper beam stroke: 300 mm Backgauge system (U gauge): 10-1550 mm Optional extension: (-3050) Machine dimensions (largest possible option): 4360 x 5220 mm Basic machine weight: 4400 kg - Bcsdpfjx Hx Slsx Ahvsw Machine-specific data: Motorized operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2003 Condition: Refurbished – very good used condition Complete tool set, with specific max. sheet thickness 2-person operation from the front Second foot switch for operation from the rear (incl. light barrier for working from behind) 15" CNC color graphic touchscreen control panel Touch&More CNC rear gauge and support system (10-1550) Backgauge system (standard): 10-1550 mm - Sample images -

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, working width: 4,060 mm, sheet thickness (max.): 2 mm, empty load weight: 5,500 kg, stroke length: 300 mm, TECHNICAL DETAILS Sheet width: 4,060 mm Sheet thickness: 2.5 mm Stroke: 300 mm Bcsdpfx Aexxrmqjhvsw Backgauge length: 10 - 1,550 mm MACHINE DETAILS Total power requirement: 3 kW Machine weight: approx. 5,500 kg

Condition: good (used), Year of construction: 2010, Very good used condition Specifications: Number of roller stations: 9 units Profiling speed approx. (based on 72mm drive roller diameter): 16 m/min Max. sheet thickness for folding: 1.5 mm Max. profile height: 20 mm Working shaft diameter: 28 mm Center distance of working shafts: - Vertical: 72 mm - Horizontal: 100 mm Minimum roller gap (both sides): 60 mm Connected load: 3.0 kW Rated current: - At 230V: 12A - At 400V: 7A Fuse protection: 16A Bcedpfxex Ekb Ae Ahvsw Net weight approx.: 430 kg Sound level: 70 db(A)

Condition: ready for operation (used), Max. working width: 3060 mm For sheets (at 40 kg strength) up to: 4 mm Bcjdpfjxwnltjx Ahvew Min. bending radius: sheet thickness x 1.25 Min. inside flange height: sheet thickness x 6 Upper beam opening width: 220 mm Lower/bending beam adjustability: 90 mm Max. bending angle: 180° Stroke speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Required space: 4150 x 1800 x 2500 mm

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Bodpfxex Av Uao Ahvecw

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Manual and automatic bending mode possible Bcjdpfx Aoxrt Rkohvew Bending angle adjustment via potentiometer Polished bending rail Weight: 1,700 kg

Condition: used, Max. sheet thickness: 1.5 mm steel 2 throughput stations (internal standing seam and corner seam) Weight: about 500 kg Bjdpfx Ajvb Etgjhvocw

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2002 Working length: 3200 mm Max. bending thickness: 3.0 mm Bcodpfswmk Ewsx Ahvew Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: used, Year of construction: 2001, Electric guillotine R.A.S with mechanical rear support, fully operational, available for testing. Specification: Model: R.A.S 52.30 Year: 2001 Manufactured in: Germany Working length: 3 100 mm Shearing thickness max: 2.0 mm Rear support: mechanical 770 mm Weight: 1950 kg Other: forward sheet metal drop. If you have any further questions, we will be happy to answer them. Bcsdpfjttv Ecjx Ahvew

Condition: used, sheet width 3200 mm plate thickness 2,5 mm weight of the machine ca. 3,5 t Tools recentely grounded. Bodpfjr Ngtfsx Ahvscw Bending angle preselection via potentiometer

Condition: good (used), functionality: fully functional, Year of construction: 1991, This high-performance swing beam guillotine shear RAS 83.30 with ELGO NC backgauge and pneumatic sheet support unit comes from first ownership. Cutting capacity: 3190 x 2.5 mm Drive power: 5.5 kW Bcsdpfx Aoxmi Dpshvjw Machine weight: 2800 kg Includes pneumatic sheet support unit, ELGO NC backgauge, 1 left-side squaring arm, and 3 additional support arms. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motor-controlled backgauge with folding cams up to 2500 mm with stop extension (disassembled) Bcodpfjxl Dt Njx Ahvjw Motorized bending beam adjustment Multibend 9001 control Segmented upper beam tool with automatic tool clamping (height 100 mm) operation manual Weight: 5800 kg

Year of construction: 2007, condition: excellent (used), RAS Turbo bend plus 62.25 New gearboxes fitted from Ras Bending length 2540mm / 2.5 metre Material thickness max 2.5mm Four extremely dynamic and fast ramp-driven movements under CNC System 6000 CNC touch screen – New control fitted in 2016 Extended back supports Light guards Portable tooling rack New / Year of manufacture 2007 Complete with: J shape back gauge Complete with segmented and straight tools and tooling rack Tooling (supplied with the machine): Standard ‘sharp’ upper tooling – 3x lengths 845mm Bcsdpsgd Dgqsfx Ahvjw Bottom tooling single length – 1x 2.54m length 10mm wide Bottom tooling single length – 1x 2.54m length 20mm wide Goats foot segmented upper tooling – 110 height section 200mm wide – 10 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length 120/90mm LH Box end – 1 length 120/90mm RH Box end – 1 length Segmented bottom tooling 200mm wide – 10 lengths 120mm – 2 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length Tool cart supplied

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Bjdpfx Ajrxt Axjhvjcw Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Used RAS Multibend Centre CNC Folder Max working 2560mm Bcodpfx Ahjrxt Hqjvow Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bsdpfx Ajw T Sc Aehvscw Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length