Used Rack Milling Machine for sale (67,693)

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition Hodpfeyxy S Rox Ab Isk

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm Hedpfxoyxy Swo Ab Isk - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base - Free-standing control cabinet - Original chip tray for placing on machine base - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Hedpfjgmi Unex Ab Ijk Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Hedpfxogqg Sgj Ab Iek Highspeed (2) 60m/min. Spindle ...

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical specifications: Blockhouse milling machine BL100A – Four-spindle unit Designed for the production of chalet corner joints by milling all four sides of the log beam in a single clamping operation using 2x vertical and 2x horizontal milling spindles. Processing dimensions: 140 x 200 mm Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 4 x 220 x 100 mm Motor power: 4 x 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Operation: Triggered by two-hand control / via control unit Milling depth adjustment via spindle, digital counter Workpiece clamping device: 2x vertical pneumatic clamps Extraction: Underfloor extraction funnel, diameter 160 mm Complete with electrical equipment, PLC control, and pneumatics. Machine base prepared for integration of an end groove and drilling unit as well as the cross-cut saw. Enclosed machine housing with hinged safety hood (supported by gas strut) and viewing window. Electric control cabinet mounted on base with 3.0 m cable duct. Ready for operation, but without tools! 2 horizontal clamps on the BL100 machine table Operation: Pneumatic, accessible from the front Automatic clamping cycle via PLC control. End groove unit Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 180 x 40 mm Motor power: 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, without cutter! Horizontal drilling unit with drill guide and chip guard Drill diameter max.: 30 mm Motor power: 1.1 kW Speed: 1,500 rpm Feed: Pneumatic, infinitely adjustable with rapid traverse for idle stroke Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, with drill bit D=20mm! Under-table crosscut circular saw in BL100A – For automatic operation only! Max. cutting size (WxH): 200 x 140 mm Saw blade diameter: 500 mm Motor power: 4.0 kW Cutting speed: 86 m/s Feed: Pneumatic Operation: Only via automated program (not included in delivery) Workpiece clamping device: Pneumatic Hsdpfx Aboyxyanj Iok Extraction funnel: diameter 120 mm Integrated in the BL100A, complete with electrical equipment and pneumatics – Ready for operation, including saw blade! Prepared for automatic operation Includes sliding table (mechanics, pneumatics, and electrics) for the end groove milling unit and the electrical interface for controlling the functions of the BL100A using an external Tigerstop control system. Infeed table length: 9 m Outfeed table length: 4 m Further technical description to follow Availability: End of March / Beginning of April 2026 Location: Netherlands

Condition: used, Year of construction: 2008, x-travel 620 mm y-travel 420 mm z-travel 400 mm digital readout 3 Achsen HEIDENHAIN spindle taper ISO 40 DIN 69871A spindle turning speed range 50 - 4000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- max. 2000 mm/min rapid traverse 5 / 4 m/min power capacity - milling spindle (S1) 10,5 kW Hedpfx Ajyxxymsb Iek quill stroke 80 mm voltage 400 V total power requirement 17,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,00 x 2,76 x 2,05 m - Serial-No.: 90395 - Digital display HEIDENHAIN ND780 - electr. handwheel - mechanical handwheels - stepless speed control - stepless feed drives - horizontal milling spindle - coolant device

Condition: good (used), MAchine come with toolholders. Hsdevk Ng Aspfx Ab Ijk

Condition: good (used), X 800 mm Y 400 mm Hjdpfxjwa Naae Ab Ijk Z 500 mm

Condition: not inspected (used), Please see technical details on photo. Hodpfx Aehvzxzob Isk

Condition: like new (used), x-travel:300 mm y-travel:220 mm z-travel:400 mm Hedpfx Aoh Ty Hkeb Ijk surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Condition: good (used), Year of construction: 1991, Machine is in good working condition. Parts shown by hand not come. X 3700 mm , Y 1250 mm, Z 550 mm, Hedpfxjyw I Abo Ab Iek 3000 rpm

Condition: used, Year of construction: 1999, x-travel 3.700 mm y-travel 1.500 mm z-travel 1.000 mm Control Heidenhain table dimensions 4.000 x 1.000 mm table load capacity 10.000 kg Hedpfsyxr Nnjx Ab Isk spindle tunring speed 3.000 U/min tool taper ISO 50 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2011, x-travel 2.000 mm y-travel 1.300 mm z-travel 1.300 mm Control Heidenhain iTNC 530 spindle tunring speed 6.000 U/min Hedpfx Abeyxr Nho Iok tool taper SK 50 number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dual drive for the Z-axis - Chip conveyor - Internal coolant system Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2025, Heavy, solid cast iron design Hedog U Uv Uepfx Ab Isk High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW table load 350 kg dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head Hodpjyxr Hmsfx Ab Ijk

Condition: excellent (used), Brand: CORREA Model: CF-22 PLUS Cnc: HEINDENHAIN 530 Table dimensions : 2.500 x 700 mm Number of slot: 5 Slot dimensions: 22 mm Axis travels (X,Y,Z) : 2.000 x 800 x 800 mm Head type : Universal manual Tool camping : Hydraulic Taper : ISO 50 (DIN 69871) Hodpfx Abeyxr Azo Ijk Speed range : 4.000 rpm Spinale power : 22 kw Rapid feeds : 12.000 mm/min Maximum weight on table : 4.000 kg Machine dimensions : 6.605 x 3.315 x 2.730 mm Machine weight : 10 tn Machine equipped with : Fairing Chip conveyor Electronica handwheel

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle Hodpfxsyxqm Se Ab Iek number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm Hjdpfxeyxqims Ab Isk

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Hsdpfeyxnzaox Ab Isk

Condition: excellent (used), functionality: fully functional, Comec FXT Double-Sided Milling Machine Hsdpeyxm R Hefx Ab Iok Number of milling units: 4 Unit arrangement: Right/Left/Top/Top Milling unit power: 4×0.85 kW Spindle speed: 12,000 rpm Feed speed: adjustable via variator

Condition: used, total height: 1,700 mm, total width: 1,600 mm, total length: 1,800 mm, Empty weight: 1.650 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.0 Hjdpfx Absymfn Ej Iok - Number of axes [pcs]: 3 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 550 - Z-axis travel [mm]: 430 - Table length [mm]: 1100 - Table width [mm]: 255 - Tool holder: ISO40 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - └ Type of digital readout: Sony - Transport dimensions: 1800mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, Heidenhain TNC 7 Water-cooled inline motor 43 kW / 900 Nm Travel distances: X = 8,000 Y = 3,200 Z = 1,600 Milling heads: 0.001° x 0.001°, 6,000 rpm Additional equipment: Tool changer for 60 tools 1 chip conveyor Selectable NC tables Plate fields Carousel rotary tables Optional: Fully automatic milling head change system Pendulum machining Hsdpfx Absqy Hinj Ijk Splash guard enclosure Operator support technology packages

Condition: new, Year of construction: 2025, Technical data: X 3500 mm Y 1300 mm Hedpfx Aoyxm Hujb Iek Z 1600 mm TNC 7 control Milling head indexing 0.001° x 0.001° 6000 rpm 60-position tool changer 2 chip conveyors High-pressure coolant (IKZ) 40 bar internal / 5 bar external Full enclosure + extraction system Carousel rotary table, diameter 1,600 mm

Condition: new, Year of construction: 2025, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, Technical data: X 3500 mm Y 1200 mm Z 1500 mm Control: TNC 7 Milling head indexing: 0.001° x 0.001° Speed: 6,000 rpm Tool changer: 60 positions Chip conveyor: 2 units Hodpfoyxmxqjx Ab Ijk Coolant supply (IKZ): 20 bar internal / 5 bar external

Condition: new, Year of construction: 2026, travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,300 mm, spindle speed (min.): 6,000 rpm, Longitudinal X 10000 mm Vertical Y 2200 mm Cross Z 1300 mm Tool holder ISO 50 Control Heidenhain TNC 7 Milling head 2.5° 6000 rpm Internal coolant supply 40 bar / external 5 bar Hsdpfsglpz Rsx Ab Isk 60-position tool changer Plate table 11000 x 2500 x 300 mm