Used R70 for sale (140)

Year of construction: 1998, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature Chamber Lajdpfx Absuuin Rj Ueh Temp. Range: -70°C to +180°C Line Voltage: 400V Rated Current: 24A Rated Power: 9.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Year of Manufacture: 1998 TK 09 Find more items - new and used - in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2000, Load capacity: 8000kg, load centre: 600mm, travel speed: 24km/h, turning radius: approx. 3600mm, lifting height: 4400mm, weight: approx. 10850kg, operating hours: approx. 400h. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2025. Laedpfx Aew E Iyvob Uoh

Condition: new, Year of construction: 2021, Semi-automatic angle welder Technical features - Power supply: 200/208/230/380V - Phase: 3ph - Installed MAX power: 2.3kW -Production per hour: up to 900 pieces per hour - Sealing bar useful dimensions: 840x600mm Laedpfxeuakk Aj Ab Ujh - MAX coil dimensions (diameter): 300mm - MAX film reel dimensions (width): 800mm - Work table height: 930mm - Machine weight (net/gross): 243/290kg - Machine dimensions with open sealing frame: 2070x960x h.1510mm - Machine dimensions with closed sealing frame: 2070x960x h.1220mm

Condition: excellent (used), Here we offer you a climatic test chamber. Water cooled Test chamber volume 350 liters Test chamber dimensions: Height 750 mm Width 650 mm Depth 720 mm Outer dimensions: Height 1800 mm Width 850 mm Depth 1640 mm Temperature working range: Temperature range -70°C/+180°C cooling speed: 3,0 K/min heating speed: 5,0 K/min Ledoi Tw Uvopfx Ab Ueah Climate working range: Temperature range +10°C to +90°C Humidity range: +10% to 98% r.H. Dew point range: +5°C to 89.5°C Temperature deviation ±0.1 - ±0.3 K temporal Humidity deviation ±1 - ±2 % r.h. temporal up to 90% r.h. max. ±1 - 3 % r.h. time above 90% r.h. Electrical connection: 400V +6-10 %, 3/N, 50Hz connected load: 13 kW rated current: 25,5 A Refrigerant: R404A / R23 Weight: 650 Kg Type: CS-70/350 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, pressure: 70stroke: 500table area: 700x500daylight: 600rapid traverse: 25working speed: 5motor: 4messurements (LxWxH): 1400 x 900 x 2250weight approx.: 1900Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Lajdpowwx Axsfx Ab Uoh Integrated pressure gauge – for precise pressure monitoring during operation

Condition: used, Year of construction: 2022, operating hours: 70 h, JCB 220X LC crawler excavator, year of manufacture: 2022, operating hours: only 70h!, LC undercarriage with 2,390mm track width, 3,000mm dipper arm, X-Line Pro package, hammer/shear and swing bucket hydraulics (PSS & p. & ATS), control circuit for a hydraulic quick coupler, very good equipment, weight: 24,724kg, as new condition, ready for immediate use, Attachments available at extra charge, On request we can make you a leasing or financing offer from JCB-Finance, Mr. Kamerzell (Tel.) will be pleased to assist you, further information can be found on our homepage, errors and prior sale excepted! Lsdpfx Abery Nfyj Ueah

Year of construction: 1997, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature Chamber Temp. Range: -70°C to +180°C Line Voltage: 400V Rated Current: 24A Rated Power: 9.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Laodpjuuiv Ijfx Ab Ujh Year of Manufacture: 1997 TK 08 Find more items - new and used - in our shop! International shipping costs upon request!

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: CR300589, overall weight: 600 kg, This is a turntable with one axis from Weiss The servo motor on this rotary table has been replaced with one from KUKA so that you can easily install this rotary table as the seventh axis on the control cabinet of your KUKA robot. Laedpfx Aettwglsb Ush Dimensions: Diameter of the plate: 910mm Table height: 500mm

Condition: good (used), Year of construction: 2005, 3 pieces Carton strapping machine, Mosca, RO-TR 700-4, fully automatic - second-hand - : Price per piece ex location: only 3.950.-€ (net)!!! Manufacturer: Mosca Type: RO-TR 700-4 Year of construction: 2005 The machines currently work with 9mm belts Channel width: approx. 72cm Channel height: approx. 54cm No.: 80527 etc. 3L-N-PE 400V, / 3 AC 1.5 kW / 50 Hz 2,5 A Control voltage: 24V, DC Condition: good Available: immediately Lodpfoq Tr Slsx Ab Uoah Location: Hanau area

Condition: used, functionality: fully functional, Year of construction: 1988, load capacity: 1,600 kg, mast type: standard, -KOM 3150- Offered here is a used R 70-16 Still forklift truck. The forklift is fully operational and equipped with a VW diesel engine and an alternator. The drive is electric! The forklift is exceptionally maneuverable for a four-wheel model. Technical data: Length (without forks): approx. 2000 mm Width: approx. 1000 mm Height: approx. 2300 mm Ledpfx Abjwz D Hqs Ujah Type: R70-16 Serial No.: 70311018 Fuel: Diesel Unladen weight: 2,789 kg Load capacity: 1,600 kg Total weight: 4,860 kg Permissible front axle load: 4,260 kg Permissible rear axle load: 1,650 kg Year of manufacture: 1988 The forklift can be inspected and tested at 33161 Hövelhof by appointment. For all further information, please refer to the pictures!

Condition: used, Year of construction: 2015, operating hours: 25 h, The Fimap MR 70S is a powerful and efficient scrubber dryer designed for intensive cleaning tasks. With an impressive theoretical cleaning capacity of 4140 m² per hour and a working width of 69 cm, the MR 70S makes short work of large areas. The cylindrical brush, with a brush pressure of 20 kg, ensures thorough cleaning on various floor types. Thanks to the generous 110-liter clean water tank and 125-liter dirty water tank, you can work for long periods without interruptions. With a working time of 2.15 hours and a top speed of 6 km/h, you clean quickly and efficiently. The MR 70S is not only powerful, but also user-friendly. Its design ensures easy operation and maneuverability, allowing even tight spaces to be cleaned effortlessly. In addition, this machine can be completely refurbished and refurbished upon request, so it will look like new upon purchase. The Fimap MR 70S is the ideal partner for anyone looking for reliable and thorough cleaning performance in commercial and industrial environments. Other specifications: - Theoretical capacity: 4,140 m²/h, - Scrubbing width: 69 cm, - Mopping width: 97 cm, - Number of brushes: 1, - Power source: Battery 24V, - Brush diameter: 21 x 69 cm Ø, - Brush type: Cylindrical, - Brush pressure: 20 kg, - Clean water tank capacity: 110 liters, - Holding tank capacity: 125 liters, Ljdpfju Iv Tujx Ab Usah - Dirty water tank capacity: 10 liters, - Traction on: Rear wheels, - Weight (excluding batteries): 223 kg, - Weight (ready to use, without water): 347 kg, - Dimensions (LxWxH): 151 x 80.5 x 132 cm, Would you like to know more about the Fimap MR 70S? Then contact us, our advisors will gladly tell you all about it!

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, load capacity: 70 kg, arm reach: 2,100 mm, pivoting range: 360 °, controller manufacturer: Kuka, controller model: KRC4 SC8, Equipment: documentation/manual, Kuka robot including Schmalz suction surface. Extensive accessories (see item list pictures) The robot was operated for exhibition purposes, has 50 operating hours and can be used for any other purpose besides palletizing. Laodpfx Aoub Uy Djb Ush Robot will be provided disassembled on pallet for delivery.

Condition: used, Year of construction: 2002, machine/vehicle number: 9692, Electric Punching Machine RENZ SUPER 700 Year of manufacture 2002 - Fully functional - Lightly used - Excellent condition - Working width 700 mm Lsdpfxewzh Dyj Ab Usah - Punch tool for wire comb binding 3:1, rectangular punch, integrated adjustable stop, working width (approx.) 330 mm - Punch tool for wire comb binding 2:1, rectangular punch, integrated adjustable stop, working width (approx.) 330 mm

Condition: good (used), Fully automatic MOSCA strapping machine RO-TR 700-2 Manufacturer: Gerd Mosca GmbH Type: R0-TR700-2 PLC control Control panel for setting the operating modes, strapping distances, strap tension Automatic PP straps width 5, 6, 7, 8, 9 or 12 mm Operating voltage: 400 V 3AC Power consumption: 3 A Power: 2.1 kW Frequency: 50 Hz Castors: four swivel castors, two of which are lockable Overall dimensions: approx. 1350 x 1200 x 1650 mm (WxDxH) Further items in other sizes - new and used - can be found in our store! International shipping costs on request! Lodpfxotzbhco Ab Usah

Condition: used, overall weight: 42,000 kg, maximum load weight: 35,000 kg, axle configuration: 3 axles, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, first registration: 04/2024, next inspection (TÜV): 04/2026, Year of construction: 2024, total width: 2,550 mm, total height: 3,856 mm, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 Lasdpfxev Dz Ixe Ab Ueh ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip fan -Motor power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressing: - da Pa -Inlet connection: O 700 mm -Outlet connection: O 700 mm Laodpfjb Iqf Njx Ab Uoh -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Condition: used, Year of construction: 1967, operating hours: 7,040 h, power: 31 kW (42.15 HP), next inspection (TÜV): 03/2027, Renault SUPER 6 R7050. First registration: 12/1967. 4x new Tzmeier canopy. Toolbox, vertical exhaust, rear PTO trailer hitch, rear hydraulic lift with drawbar, 6-speed gearbox, suspension seat. Original registration document available. Vehicle registration certificate, owner’s manual, TÜV reports, invoices available. =We purchase commercial vehicles daily and accept trade-ins=. With trailer: +600 EUR. Lodpfx Ajwfknpjb Uoah

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Functionally tested Equipment and technical data: Milling unit 6 kW, water-cooled Tool holder HSK 63 F Speed 1,000 - 18,000 rpm. Tool changer: 6-way side Drill head: 9 vertical drilling spindles in 32 mm grid Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X direction Control: Twin CAm 32 Vacuum pump 100 cbm/h Incl. vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Lodewka H Eepfx Ab Ueah Installation dimensions 5200 x 2843 x 1855 mm Weight: Approx. 3,500 kg Availability: by arrangement Warehouse location: Röllbach

Condition: used, Bezel moving with, bezel, steady rest, lynette Laodpfxeb A Rqqo Ab Ueh -Max. Passage: Ø 70 mm -Plating: brass -Hole spacing: 295 mm -Tip height: 135 mm -Weight: 4 kg

Condition: used, Bezel moving with, bezel, steady rest, lynette -Max. Passage: Ø 70 mm -Edition: gray cast iron Lajdpfx Ajb A Ihtjb Ueh -Hole spacing: 395 mm -Tip height: 250 mm -Weight: 15 kg

Condition: used, Bezel, stick, lynette Lsdpfeb A Iuiox Ab Usah -Max. Passage: Ø 70 mm -Tip height: 250 mm -Weight: 10 kg

Condition: used, Gear motor, electric motor -Speed: 10/20 rpm -Power: 0.37/0.88 kW -Construction: B3 -Brake Lasdpeb A Hcusfx Ab Ujh -Diameter shaft: Ø 40 mm -Protection class: IP 44 -Weight: 60 kg

Condition: used, Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 70 mm shaft -for gland tape Ljdpfx Abedfgllj Ujah -Number: 2x glands available -Price: per piece -Dimensions: 155/155/H71 mm -Weight: 3.9 kg

Condition: used, Bezel, stick, lynette -Max. Passage: Ø 70 mm -Tip height: 200 mm Lsdpfx Abeb A Rfpe Uoah -Drawing with the photos -Weight: 8 kg

Condition: used, Gear motor, electric motor Lodpfxsci N Hfe Ab Uoah -Speed: 53 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 44 -Dimensions: -Weight: 47 kg