Used Quick Release Skewers for sale (6,706)

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Iedpewc Afhsfx Affetr Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, The Henry Quick cordless vacuum cleaner from Numatic is a display item in mint condition. The battery life is approx. 60 minutes and carpets can be cleaned effectively with the electric turbo nozzle. The stand / column can be purchased for an additional charge. Technical data: Iedpfsuiyg Eox Affetr Running time: approx. 60 minutes Motor: 300 watts Filter bag capacity: 1 liter Weight: 3.2 kg

Condition: excellent (used), power: 122 kW (165.87 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 8,582 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 25.000 kg Itjdpfx Aew U Df Ejffor Dimensions (LxBxH): 889 x 298 x 308 cm Engine type: Caterpillar C4.4 Mast: articulated arm Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: Japan Condition CE type: CE OQ70/55 Oilquick quick coupler, 600 mm track shoes, bucket with teeth, transport width 300 cm

Condition: good (used), Quick-change tool holder size D with base Iedow Ec Eyopfx Affjtr Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2004, MAZAK QUICK TURN NEXUS 200-M Itsdpewx Nl Hsfx Affor CNC LATHE Mazak Quick Turn Nexus 200 M CNC lathe with Mazatrol Nexus 640T control, a new 8” power chuck with big bore to take 80mm, tool setter, parts catcher, swarf conveyor, suit of tool holders, collet chuck and barfeed interface * Note: Photographed on arrival…awaits cleaning & prep. Specification: Maximum Swing 675 mm / 26.57 in Maximum Machining Diameter 380 mm / 14.960 in Maximum Bar Work Capacity 65 mm / 2.6 in Maximum Machining Length 541 mm / 21.300 in Main Spindle Chuck Size 8 in -with big bore Maximum Speed 5000 rpm Motor Output (30-minute rating) 19 kw / 25.0 hp Turret (Upper) Number of Tools 12 Maximum Speed 4500 rpm Motor Output (5-minute rating) 6 kw / 7.5 hp Feed Axes Travel (X Axis) 230 mm / 9.06 in Travel (Z Axis) 575 mm / 22.64 in

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post -Mounting dimensions: 112 mm Iodpfxod Ebplj Affetr -Number: 5x steel holders available -Price: per piece -Dimensions: 160/55/H170 mm -Weight: 3.7 kg/piece

Condition: ready for operation (used), Year of construction: 2007, operating hours: 7,921 h, functionality: fully functional, machine/vehicle number: 637, travel distance X-axis: 754 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, TECHNICAL DETAILS Number of axes: 3 X travel: 754 mm Y travel: 500 mm Z travel: 500 mm Max. spindle speed: 10,000 rpm Table size length: 1,000 mm Itodowyv Tmspfx Affsr Table size width: 500 mm Control type: Heidenhain iTNC 530 Control: CNC Interface: ISO40 MACHINE DETAILS Dimensions & Weight Weight: 4,000 kg Dimensions: 2,600 mm x 2,350 mm x 2,560 mm Transport packages: 3 units EQUIPMENT Documentation available CE marking available

Condition: good (used), Table size: 710x450mm Itsdpfxjv S Ugds Affsr Good condition!

Condition: used, Year of construction: 2011, 2011 Mazak Quick Turn Nexus 250-II M in superb condition with Mazak Matrix Nexus Control, 12-position turret, live tooling , chip conveyor, high-pressure coolant system, automatic tool presetter, and part catcher. ----- Machine Specification: CONTROL Mazak Matrix Nexus Control 15” Color LCD Touchscreen Mazatrol conversational programming (also supports G-code) Networking capabilities: Ethernet, USB, FTP, DNC CAPACITY Chuck size (main spindle): 10” Maximum swing: 610 mm Maximum machining diameter: 350 mm Maximum turning length (1000 mm bed): 1,025 mm Maximum turning length (500 mm bed): 515 mm Max bar work capacity (main spindle, dependent on chuck system): 76 mm MAIN SPINDLE Rotating speed maximum: 4,000 min⁻¹ Motor output (30-minute rating): 26.0 kW TURRET Number of tools: 12 Ijdpevt Ehzjfx Affstr Mill spindle motor output (10-minute rating): 5.5 kW FEED AXES Travel (X axis): 190 mm (500 mm bed) / 225 mm (1000 mm bed) Travel (Z axis): 515 mm (500 mm bed) / 1,025 mm (1000 mm bed) / 1,535 mm (1500 mm bed) Rapid traverse (X axis): 30 m/min Rapid traverse (Z axis): 30 m/min ACCESSORIES Chip conveyor (optional) High-pressure coolant system (optional) Automatic tool presetter (optional) Part catcher (optional) MACHINE SIZE Machine dimensions (L x W x H): 2,475 mm x 1,780 mm (500 mm bed) / 4,382 mm x 2,095 mm (1500 mm bed) Machine weight: Approx. 7,500 kg Total power consumption: Approx. 20 kVA Control: Mazak Matrix Nexus Control Spec: Spindle Bore 76 mm | Max Swing 610 mm | Travel mm X 190 Z 616 Accessories: Tailstock, Tool setter, Parts catcher, Swarf conveyor & Tooling Package

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar holder, quick-change turning tool post, double tool post, double turning tool post, double tool post, double quick-change tool post, 4-way turning tool post, quadruple tool post, 4-way quick-change tool post -Quick-change tool holder: 4-way quick-change boring bar holder Itjdpjwvpvgjfx Affer -Recording dimensions: see photos -Clamping height: 59/34 mm -Clamping length: 200 mm -Dimensions: 330/200/H285 mm -Weight: 30.3 kg.

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar post, quick-change turning tool post, double tool post, double turning tool post, double tool post, double quick-change holder -Quick-change tool holder: quick-change boring bar holder Iodpfx Aswuygasffotr -Bore: Ø 16 mm -Recording dimensions: see photos -Clamping height: 32/25 mm -Clamping length: 140 mm -Dimensions: 180/140/H160 mm -Weight: 15.7 kg/piece

Condition: used, Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm -Type: FW2 TGL 30 21212 -Quantity: 2x quick-change chucks available -Price per piece -Total dimensions: Ø 50 x 143 mm Itodpsrvlfnefx Affsr -Weight: 0.6 kg

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert, interchangeable inserts, milling holder, collet chuck, reducing sleeves, attachment holder, thread quick-change insert Itedpfx Aeway Egjffer -Manufacturer: Bilz, thread quick-change insert 2 pieces -Type: WES 3 B 14x11 / WES 3 B 22x18 -Design/Size: see photos -Price/Delivery: complete -Transport dimensions total: 150/72/H103 mm -Weight: 3 kg

Condition: used, Quick-change chuck, quick-change mount, quick-change head, quick-action drill mount, quick-change insert -Quick change sleeves: with drilling tool, 10 pieces -Intake: Inside Ø 9x 12 mm / 1x 17 mm -Version/size: Ø 30 mm, see photos -Price/delivery: complete Iedpfx Afskxhpfefotr -Transport dimension: 260/170/H50 mm -Weight: 4.2 kg

Condition: good (used), wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: LEUCO quick clamping system with wood cutter -Hole: Ø 35 x 75 mm -Saw blade: Leuco 250x4.0/2.8x100Z48 202062 -Number: 2x recordings available -Price: per piece -Total dimensions: Ø 250 x 90 mm -Weight: 12.5 kg/piece Iedpovx Rt Hsfx Affotr

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert, interchangeable inserts, milling holder, collet chuck, reducing sleeves, attachment holder, thread quick-change insert Iodpfx Ajwa Iwdsffstr -Manufacturer: Bilz, thread quick-change insert 5 pieces -Type: WE 3 12x9 / WE 3 16x12 / WE 3 20x16 / WE 3 25x20 / WE 3 28x22 -Design/Size: see photos -Price/Delivery: complete -Transport dimensions: 220/140/H75 mm -Weight: 3.8 kg

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar post, quick-change turning tool post, tool post -Quick-change tool holder: quick-change turning tool holder -Recording dimensions: see photos -Cutting tool holder: Ø 31 mm MK4 -Dimensions: 135/55/H125 mm Iedpfx Afswa Rt Iofotr -Weight: 2.7 kg

Condition: used, Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: Mounting: MK3 / 32 mm Iedervldxspfx Affetr -Dimensions: see photos -Quantity: 14 pieces available -Price per piece -Dimensions: Ø 62 x 175 mm -Weight: 1.2 kg/piece

Condition: used, Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, keyless drill chuck, CNC short drill chuck Itedpsrk S Diofx Affer -Manufacturer: WTE, keyless drill chuck CNC short drill chuck with coolant supply -Type: 47.296.30.13 -Receptacle: Ø 30 mm -Clamping Ø: 0.5-13 mm -Dimension: 137/68/H62 mm -Weight: 1.7 kg

Condition: used, Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Quick-change turning tool holder: 16 B 1 Ijdpfx Aspk Iqhoffstr -Shooting dimensions: see photos -Clamping height: 40 mm -Support length: 200 mm -Quantity: 2x holders available -Price per piece -Dimensions: 200/65/H150 mm -Weight: 3.6 kg/piece

Condition: used, Quick-change chuck, quick-change mount, quick-change head, quick-action drill mount, quick-change insert -Quick change sleeves: 10 pieces -Intake: Inside Ø 4 to 8.5 mm, see photos Iedpfx Afskxhpxjfjtr -Version/Size: Ø 30 x 105 mm -Price/delivery: complete -Transport dimension.: 260/170/H50 mm -Weight: 5 kg

Condition: used, Quick-change tool holder, tool holder head, quick-change tool holder, quick-change drilling tool holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change boring bar holder: clamping diameter 44 mm -Recording dimensions: see photos -Dimensions: 144/72/H155mm -Weight: 2.9 kg Itjdpfxsqbycms Affsr

Condition: used, Quick button, outside quick button, digital outside quick button, measuring gauge, outside quick button -Manufacturer: Kroeplin, digital external quick button type IP67 -Measuring range: 0-50mm -Measurement depth: 167 mm -Measurement accuracy: 0.02mm Itjdpok Egkdjfx Affjr -Dimensions cardboard: 380/220/H80 mm -Weight: 1.1 kg

Condition: used, Quick-change tool holder, tool holder head, quick-change tool holder -Mounting dimensions: dovetail width 39 mm see photos -Price per piece Itodor U Sf Iopfx Affsr -Quantity: 3 pieces -Dimensions: 86/38/H60 mm -Weight: 0.8 kg/piece

Condition: used, quick-change tool holder, tool holder head, quick-change tool holder, quick-change drilling tool holder, quick-change boring bar holder, quick-change turning tool holder Iodpouypzisfx Affetr -Quick-change tool holder: Quick-change boring bar holder -Recording dimensions: see photos -Number: 2x steel holders available -Price: per piece -Dimensions: 115/55/H130 mm -Weight: 1.5 kg/piece