Used Pvc for sale (907)

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Bcsdpsyhckaefx Ahvsw Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: Bodpfsyhcabex Ahvecw HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2026, condition: new, functionality: fully functional, YESOL 3500 CMS Industrial Cutting Plotter – AutoFeed CNC The YESOL 3500 CMS is an industrial cutting plotter developed by YS Solutions, based on extensive production experience in working with plastics and technical materials. The plotter is fully automated and equipped with a roll-feed mechanism compatible with standard industrial rolls, enabling uninterrupted production with no downtime. Applications • PVC, TPU • Technical and industrial fabrics • Membranes and coated materials • Eco-leather • Technical films and plastics Key Specifications • Working area: 3500 × 6000 mm • Cutting speed: up to 3 m/s • Cutting system: rotary knife (tungsten steel) • Table: conveyor with vacuum system • Feed: automatic, suitable for standard rolls • Positioning: laser-based • Control: CNC with nesting functionality • Power: 11 kW Bedpfx Aheyg R Evsvscw

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Semi automatic double head cutting machine used for alu/PVC profiles. Bedpfx Ahoygwt Hsvocw Very good condition, in production.

Condition: good (used), WEBER tube extrusion line including: Bsdpfx Aevryhyjhvocw WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm The pipe head was in operation for about 1 year, due to business closure. Bjdpowqgitjfx Ahvocw Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments Bodpoya Eldofx Ahvocw HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: used, Inductive sensor, electronic sensor, sensor cable, connection cable, connection cable Bcodpfxjir Ntto Ahvsw -Manufacturer: Leuze electronic, connection cable sensor cable Ovp -Type: KD M12A-4P-5m-PVC -Part No.: 50104544 -Number: 2x cables available -Price per piece -Dimensions packaging: Ø 200 x 30 mm -Weight: 0.2 kg/pc.

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope, clothesline, PVC wire rope Bcedpfopy Ryqjx Ahvjw -Wire rope: Steel rope PVC coated -Type: 6x7 FC PVC transp. -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 2 pieces available -Price: per piece -Weight: 6.6 kg/piece

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -PVC coated -Length: approx. 50 m -other crane ropes are also available -Weight: 6 kg Bcsdpfx Aoghnanjhvsw

Condition: excellent (used), Year of construction: 2012, Double head saw for aluminim or PVC profiles PERTICI UNIVER 400IP, year 2012 Bjdpfxshqb T Ho Ahvocw Condition: excellent - Two Ø400 mm tungsten carbide saw blades - Spray mist blade lubrication system - Maximum cut between the two heads: 3500 mm - Minimum cutting capacity between two heads at 90°: 580 mm - Minimum cutting capacity between two heads at 45°: 580 mm - Hydro-pneumatic feeding of saw blades - Two horizontal pneumatic vices - Two vertical pneumatic vices - Two intermidiate profile support

Year of construction: 2011, condition: excellent (used), functionality: fully functional, SICA-TRS 90-500 , PLANETARY TUBE SAW PLANETARY SAW Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 100 mm Max diameter 500mm Year of construction 05-1994 Bedpfxsxwd Spo Ahvscw Central clamp Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Condition: like new (used), Year of construction: 2019, Arburg 375V 500-100 Drehtisch (2019) Clamping force: 50 t Screw diameter: 20 mm Type: Vertical Bcsdpfswzmdxjx Ahvow Drive: Hydraulic PVC material

Condition: good (used), Year of construction: 2021, Automatic machine for the production of PVC tarpaulin covers for tent halls – sold for spare parts. Italian-made welder for tarpaulins by SolarEdge Automation Machines, manufactured in 2021. The machine has seen limited use for manufacturing PVC covers for tent structures. Machine specifications: - Material: PVC with a weight of 450 g/m2 - Material specifications: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. external diameter – 600 mm - PVC or PE keder rope with a diameter of 4/5/7 mm - Minimum product length: 1500 mm - Minimum finished product width: 800 mm - Power supply: 400V The machine welds together the surfaces of two material rolls, cuts them to the required width, and thermal-bonds the keder cord to the edges of the material. The machine consists of: - 2 material feeders with automatic material position adjustment - Knives for cutting material to required width - Welding module for joining two pieces of material - Modules for fusing the keder tape to the material edges - Module for feeding and welding the keder cord with automatic tension control Bcsdpfx Asx Dk H Tehvow - Encoder for product length control - Knife for cutting the product to the set length Welding is performed with high-performance Leister hot air heaters. Components used in the machine: 1. Heaters and blowers by Leister 2. Control systems, electrical and safety components by Omron and Siemens 3. Drives and gearboxes by Seipee and Nidec 4. Pneumatic systems by Festo and SMC 5. Vision system by HIKVISION 6. Linear guides and carriages by HIWIN Machine is only sold as a complete unit!

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars • Cutting frame profiles to size The machine is additionally equipped with a transverse feed/magazine for components. Bodpsxl Dnaofx Ahvscw

Year of construction: 2009, condition: excellent (used), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Bcodpfjvbvznex Ahvsw Application: Cutting and chamfering PVC, PE, PP PIPES With chip extraction fan Min. diameter 40 mm Max. diameter 400 mm Year of manufacture 2009 Accessories: Various clamp jaws Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstraße 6 The machine is my property.

Condition: ready for operation (used), Technical characteristics Bcedpfx Ahsundfwsvsw 2 straight welding heads, one mobile head CN command Adjustment for heating time, hardening, welding temperature, fusion and cutting pressure ascending heating plate rapid changing in function of elements width Power and Motors Power: 4 Kw Overall dimensions

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Bcodpfxevl Eahe Ahvew Tronzadoras MG - GAA-350-90+CNC+TR12 • Automatic cycle. • 700 mm ballscrew feeder. • OMRON controller. • 10 programs with 30 lines. • 20 parts in memory. • Emergency stop. • Adjustable feeding and cutting speeds. • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. • Semi-automatic or fully automatic operation. The machine is inspected, serviced and ready for work.

Year of construction: 1993, condition: excellent (used), Extraction system for aluminium and PVC swarf Bodpfx Aed Rx H Eehvscw Dimension: 800x1000x2370

Year of construction: 1980, operating hours: 36,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Bedpfx Ahjvuquvovscw

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11218-20, The press is fully functional, in constant use. The press is fully functional and in constant use. Bodpfx Aswh R D Aehvocw The press is fully functional, in constant use.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Bcjdpfx Aov H E Alohvew

Condition: used, machine/vehicle number: 271, empty load weight: 6,850 kg, maximum load weight: 27,150 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 05/1991, loading space volume: 59 m³, suspension: air, tire size: 385/65 r22,5, color: red, Drum brake Bcedpfx Ahoi A Tqajvew BPW axles Rear support aluminum frame Errors excepted

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Bcedew Ahfgopfx Ahvsw Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Condition: excellent (used), Year of construction: 1995, HEIN TVP 160 Pipe Saw Year of Manufacture: 1995 With chipping jaws Application: Cutting and beveling PE, PP, and PVC pipes: Smallest diameter 30 mm Largest diameter 160 mm Also suitable for short lengths starting at 10 cm Condition: The pipe saw is in working order. The saw is my property. Bcjdpevwm N Uefx Ahvew Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany