PVC pipes

Condition: ready for operation (used), functionality: fully functional, working width: 1,500 mm, punching force: 28 t, workpiece weight (max.): 200 kg, sheet thickness (max.): 4 mm, working length: 3,000 mm, TECHNICAL DETAILS Maximum punching force: 280 kN Working area: 1,500 x 3,000 mm Maximum sheet metal thickness: 4 mm Maximum workpiece weight: 200 kg MACHINE DETAILS Kjdezliviepfx Ap Ajlw Machine weight: 15,800 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0250A0472, laser power: 5,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, TECHNICAL DETAILS Kodpfxszkr T Uo Ap Aslw Travel range, X-axis: 4,000 mm Travel range, Y-axis: 2,000 mm Laser power: 5,000 W MACHINE DETAILS Mains voltage: 400 V / 50 Hz Connected load: 105 kVA Control voltage: 24 V DC Required fuse rating: 3 x 160 A Compressed air connection: 7 to 10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: M704025, sheet thickness (max.): 100 mm, overall weight: 4,650 kg, passage width: 1,300 mm, TECHNICAL DETAILS Material thickness: 0.8 to 100 mm Passage width: max. 1,300 mm Workpiece dimensions: min. 180 x 100 mm Workpiece weight: max. 250 kg/m Feed rate: 0.2 to 6 m/min MACHINE DETAILS Kodpfxszkr Rtj Ap Aolw Dimensions & Weight Dimensions: 2,200 x 2,900 x 2,200 mm Machine weight: approx. 4,650 kg EQUIPMENT Processing: on both sides, dry

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Kjdpfjzkg Sfox Ap Aslw Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Tools and Screening Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Power requirement, dual drive: 2 x 45 / 2 x 55 kW Weight: approx. 5,800 kg EQUIPMENT Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Kodpjzka Hiofx Ap Aolw Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool slots in the tool magazine: 30 MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling, 20 bar, with dual switching filter Documentation: Hedelius + Siemens Sinumerik Infrared probe: Renishaw Kedpfxjzka Aks Ap Aslw

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386J04112, Year of construction: 2018, operating hours: 886 h, load capacity: 1,500 kg, lifting height: 3,150 mm, fuel type: electric, mast type: simplex, construction height: 2,196 mm, No minimum price – guaranteed sale to the highest bidder! Kljdszi A H Aopfx Ap Aew 3-wheel forklift with only 886 operating hours! TECHNICAL DETAILS Load capacity: 1,500 kg Lifting height: 3,150 mm MACHINE DETAILS Mast type: Simplex Fuel type: electric Battery voltage: 24 V Operating hours: 886 h Overall height: 2,196 mm EQUIPMENT Charger Side shifter 3rd valve External reference: SL16606

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517343F00026, Year of construction: 2015, operating hours: 7,420 h, load capacity: 8,000 kg, lifting height: 3,750 mm, fuel type: diesel, mast type: simplex, construction height: 3,010 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 3,750 mm MACHINE DETAILS Mast type: Simplex ISO class: 4 Fuel type: Diesel Operating hours: 7,420 h Overall height: 3,010 mm EQUIPMENT 3rd valve Klodpfx Apoziy U Re Ajw 4th valve Heater Full cab Air conditioning External reference: SL18141SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MAN00000J00863884, Year of construction: 2020, operating hours: 5,354 h, load capacity: 2,000 kg, lifting height: 4,500 mm, free lift: 1,490 mm, fuel type: electric, mast type: triplex, construction height: 2,075 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,500 mm Free lift: 1,490 mm MACHINE DETAILS Mast type: Triplex ISO class: 2 (1,000 - 2,500 kg) Kledpfxeziy Uke Ap Asw Operating hours: 5,354 h Fuel type: electric Battery voltage: 48 V Overall height: 2,075 mm EQUIPMENT Side shifter 3rd valve 4th valve External reference: SL14647

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386V09129, Year of construction: 2019, operating hours: 1,805 h, load capacity: 1,600 kg, lifting height: 3,250 mm, fuel type: electric, mast type: simplex, construction height: 2,246 mm, No minimum price – guaranteed sale to the highest bidder! 4-wheel forklift with only 1,805 operating hours! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,250 mm MACHINE DETAILS Mast type: Simplex ISO class: ISO Class 2 (1,000 - 2,500 kg) Operating hours: 1,805 h Fuel type: electric Battery voltage: 48 V Overall height: 2,246 mm Kodoziy T Topfx Ap Aelw EQUIPMENT Battery charger Side shifter External reference: SL11826SLO