Used Pvc Machinee for sale (1,143)

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Kedpfx Ahox Rx D Ae Nsll Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: good (used), - 10 stainless steel silos - Brand: AZO - Previously used for: PVC powder - Condition: The silos have always been stored indoors and are in very good condition. Technical details: • Capacity: 12 metric tons / approximately 7.2 m³ • Each silo equipped with vibrating discharge base • Each silo equipped with discharge valve (rotary valve) • Provided with pneumatic conveying pipe Kledpfx Ahjx E U Hco Nsl Price per silo: €4,750 Ex Works, Rotterdam region Payment terms: 100% prepayment before delivery The silos are offered as is, where is, loaded onto truck Single unit purchase possible Available while stocks last The silos will be professionally dismantled by Plastima Used Machinery and partner; after dismantling, they will be ready for collection for your own transport or we can arrange shipping on behalf of Forbo. Collection/shipping can be scheduled between January 12, 2026 and February 16, 2026. If you would like to inspect the silos, we would be pleased to arrange an appointment with you.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, SICA-TRS 90-500 , PLANETARY TUBE SAW PLANETARY SAW Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 100 mm Max diameter 500mm Year of construction 05-1994 Central clamp Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property. Kodjxwd Spspfx Ah Noll

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Ksdpfjxdciajx Ah Njll Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: excellent (used), functionality: fully functional, Welding machine: FUSION 4H Frame discharge unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning unit Rotary table Cleaning unit (second model) TRIMMER 4A Extraction table Kledsxzzxbspfx Ah Nol Second milling module (INTEGRA Q2) Q-MATIC 2 Line supervisor laptop

Condition: like new (used), Year of construction: 2019, Arburg 375V 500-100 Drehtisch (2019) Clamping force: 50 t Screw diameter: 20 mm Type: Vertical Drive: Hydraulic PVC material Kljdpfx Aswzmdxeh Nol

Condition: good (used), Year of construction: 2021, Automatic machine for the production of PVC tarpaulin covers for tent halls – sold for spare parts. Italian-made welder for tarpaulins by SolarEdge Automation Machines, manufactured in 2021. The machine has seen limited use for manufacturing PVC covers for tent structures. Machine specifications: - Material: PVC with a weight of 450 g/m2 - Material specifications: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. external diameter – 600 mm - PVC or PE keder rope with a diameter of 4/5/7 mm - Minimum product length: 1500 mm - Minimum finished product width: 800 mm - Power supply: 400V The machine welds together the surfaces of two material rolls, cuts them to the required width, and thermal-bonds the keder cord to the edges of the material. The machine consists of: - 2 material feeders with automatic material position adjustment - Knives for cutting material to required width - Welding module for joining two pieces of material - Modules for fusing the keder tape to the material edges - Module for feeding and welding the keder cord with automatic tension control - Encoder for product length control - Knife for cutting the product to the set length Welding is performed with high-performance Leister hot air heaters. Components used in the machine: 1. Heaters and blowers by Leister 2. Control systems, electrical and safety components by Omron and Siemens 3. Drives and gearboxes by Seipee and Nidec 4. Pneumatic systems by Festo and SMC 5. Vision system by HIKVISION 6. Linear guides and carriages by HIWIN Kledpex Dk H Tefx Ah Nel Machine is only sold as a complete unit!

Condition: used, Year of construction: 2008, functionality: fully functional, 90° welding and possibility of welding angles from 40° through 180° Limitation of standard welding seal thickness (2mm.) (1 mm upon request). Klsdpfxjxytpco Ah Njl Reduction of welded profile length 3 mm. For each welded profile side. Automatic temperature control of the fusion plate. Automatic control of fusion times. Automatic control of welding times. Adjustment of fusion pressure. Integral protection of working area, fusion plate and locking cylinders. Working cycle and other functions controlled by an electronic card (DCS) Profile supports for quick change-over of counter forms. Device for quick change-over of profile positioning blade. Time-controlled working cycle . Working cycle with possibility to repeat the profile locking, in case of wrong positioning Profile supporting arms.

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm Kjdowqgitjpfx Ah Nell The pipe head was in operation for about 1 year, due to business closure. Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars Kljdjxl Dnaspfx Ah Nol • Cutting frame profiles to size The machine is additionally equipped with a transverse feed/magazine for components.

Year of construction: 2002, condition: good (used), functionality: fully functional, Single head PVCu window welding machines. Excellent condition, Easy to use fully ready for work. Power supply 230V. The welding angle of the product is changed from 30 ° -180 °. Kjdpfxerkm Sgs Ah Njll

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Ksdpfx Ahjxu U Tre Noll Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2009, condition: excellent (used), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Application: Cutting and chamfering PVC, PE, PP PIPES With chip extraction fan Min. diameter 40 mm Max. diameter 400 mm Year of manufacture 2009 Accessories: Various clamp jaws Kljdpfx Ahsvbvzno Nel Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstraße 6 The machine is my property.

Year of construction: 2010, condition: excellent (used), The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Kjdow Hk T Uspfx Ah Njll

Condition: used, Year of construction: 2006, CONTAINER TYPE: Klsdpew Agn Tofx Ah Nel 20-foot refrigerated container, Carrier, NEWLY painted in RAL 9003 with LED lighting, flat floor, small PVC fix in front of the freezer door, partition wall with freezer door - with insulating wall and door instead of the container doors. Convenient size for your goods storage, even in limited space. Suitable for indoor and outdoor use. We can manufacture any size to order. Please inquire! Original images RFBU 372782-3 RENTAL also available TECHNICAL SPECIFICATIONS: Power consumption: 380/440 V, 32 A, 50 Hz / 60 Hz with 5-pin CEE plug for land operation Interior: Made of stainless steel/aluminum, food-safe Average power consumption: 3-8 kWh Adjustable temperature range: -25 ... +25 °C (ideal for heating and cooling) Refrigerant: R134A / R449A DIMENSIONS: External dimensions in mm: 6,058 x 2,438 x 2,591 (L x W x H) Internal dimensions in mm: 5,456 x 2,294 x 2,260 (L x W x H) TRANSPORT SOLUTION: Do you need a transport solution? We're happy to help! We deliver your container using regular trucks or crane trucks and drop it off at your location. Ask us for a quote! All refrigeration units are serviced and of excellent quality and performance. We look forward to hearing from you! BIMICON Container Service, your specialist from Hamburg BIMICON refrigerated containers & sea containers since 1996 in Germany and worldwide.

Year of construction: 1983, operating hours: 100 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 010383, Mixer for PVC, 3 units - Kodpfsxl E Rvex Ah Nsll

Year of construction: 2023, condition: new, Josan PVC Mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️ Net price only €18,999 ‼️ With our complete system, as shown in the picture, you can finely mill your plastics and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and all other types of plastic recycling machines available. Whether you are a large company, medium-sized business, or small enterprise, with our expertise we can cater to your individual needs in the recycling sector with our machines! We have machines in stock in Heilbronn for live demonstrations! From copper granulation plants, shredders, and electrostatic separators (for example, to separate sand from plastic, copper from plastic, different types of plastics, etc.), so you can directly reuse clean material. Just ask us. We manufacture the appropriate system tailored to your needs. Unfortunately, our English is not perfect. You’re also welcome to speak to us in Swabian! Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 fixed blades made from the hardest special steel alloy ▶️ All-inclusive as shown in picture ▶️ Weight approx. 1,200 kg Net price: €18,999.00 Kledpfeqvmn Nex Ah Nsl +19% VAT: €3,609.81 Gross price: €22,608.81 Subject to errors. Pictures/description may vary.

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 1006882, Soft PVC Coextruder Klodpfx Asxgh Itjh Njl

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 10061195, Soft PVC Coextruder Kledpfx Ahsxgh Imj Njl

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Kljdpfxexgh H Aj Ah Nsl

Year of construction: 2001, condition: used, functionality: not functional, machine/vehicle number: (H) 96801, Micronisation installation for PVC recycling Kljdpoxgh E Ejfx Ah Nol

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Kledpfxoxghy Nj Ah Nol

Condition: used, functionality: fully functional, machine/vehicle number: 036, Year of construction: 1997, IDE single screw extruder for PVC profiles Klsdpfxoxghxro Ah Nsl

Condition: used, machine/vehicle number: 271, empty load weight: 6,850 kg, maximum load weight: 27,150 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 05/1991, loading space volume: 59 m³, suspension: air, tire size: 385/65 r22,5, color: red, Drum brake BPW axles Rear support Ksdpfsi A Tqajx Ah Nell aluminum frame Errors excepted

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Technical Specifications: Ksdpsw Nhumjfx Ah Noll - Saw blade speed, frequency controlled, for very fine cutting - Saw blade diameter: 200 mm - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand