Used Pvc Cutting Centre for sale (17,522)

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Lasdpfx Aboxp Iybe Ueh Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them. Ledpfov D A Imox Ab Ujah

Condition: used, 86 sets available (2 pcs. per set)different sizesmore information under "Download" Lsdpfx Aedc A Sajb Ujah

Year of construction: 2004, condition: ready for operation (used), - USED - CO2 LASER SOURCE Lasdpfx Abexfm A Ts Ueh SOURCE: ROFIN DC 030 ; 3000 W WEIGHT: 570 Kg

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W @ 9400 nm / 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Maximum Position Resolution: 18 bit for XY, 16 bit for Z* Lajdpfx Aexp Iw Hob Uoh Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min warmup): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing, with varioSCAN): (433 x 268 x 266) mm³ Beam Offset: 72.72 mm Other Features Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (upon arrangement) or local pickup possible. Feel free to contact us by phone for further questions.

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Lsdjwd E N Espfx Ab Usah Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Year of construction: 2013, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3270 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 100 mm WORKING AREA: 3070 x 1550 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: AJ2000 Fiber ; 2000 W CONTROL UNIT: AMADA AMNC3i WEIGHT: 11200 Kg Ledpfxsvhc S Hj Ab Usah OVERALL DIMENSIONS: 10028 x 2900 x 2000 mm NOTE: WITH LOADING/UNLOADING SYSTEM LKI 3015FLC-AJ YOM 2013; AUTOMATIC NOZZLE CHANGE

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: CNC plasma cutting machine – designed for the production of flue caps and ventilation components. Condition: Used, in good technical working order, currently connected – viewing and testing on site possible. This equipment is intended for the manufacture of pipes, chimney caps, and ventilation elements from sheet metal and light metals. Technical specifications: - Year of manufacture: 2007 - Cuttable pipe diameter: from Ø60 mm to Ø600 mm - Maximum product length: 1500 mm - Sheet thickness (official): 0.5 – 1 mm Laedpfexlp Sqjx Ab Ujh - Tested capacity: cutting up to 3 mm wall thickness (depending on plasma source and metal type) - Plasma power sources: 2 units – 60A and 80A - Plasma output: 60 A / 80 A (depending on selected source) Features and equipment: - Fully programmable CNC controlled machine - Ability to generate cutting contours based on model or template - Precision automatic positioning and rotation system - Adaptable to different pipe diameters - Integrated plasma cutting control system with adjustable output - Comes with two plasma power sources (60A and 80A) – to suit your production needs Application: - Suitable for the production of ventilation systems, flue caps, ducting, and various tubular structures - Suitable for cutting thin sheet metal (0.5–1 mm) as well as processing thicker walls (up to 3 mm) - Utilization of CNC technology ensures high cutting precision and repeatability, reducing manual labor requirements If you have any further questions, please feel free to contact us.

Year of construction: 2004, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3420 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 200 mm RAPID FEEDS X-Y-Z: 80 - 80 - 60 m/min MAX CUTTING THICKNESS: STEEL 22mm; INOX 12mm; ALUMINIUM 9 mm WORKING AREA: 3070 x 1550 x 200 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: FANUC C4000 E ; 4000 W CONTROL UNIT: FANUC 160 iLB WEIGHT: 15500 Kg Lajdovhc Tdjpfx Ab Ueh NOTE: DOUBLE STORAGE TOWER LKI UL300FO TWIN year 2004; SUCTION AND FILTERING UNIT TORIT; COOLING UNIT MTA 201

Condition: used, The machine is designed to straightening and cut metal from a roll. Fully functional, straightening machine engine replaced a few years ago, Lenze. New software Lenze has been installed. The machine is programmable. Adjustable width, cutting length, sliding table. There is a remote control. There is an additional blade for the guillotine. Working width: 1500 mm Ljdpfjm E U Hiex Ab Ueah Thickness: up to 2 mm If you have more questions, we will be happy to answer them.

Year of construction: 2012, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 15000 Kg OVERALL DIMENSIONS: 12900 x 6750 x 2500 mm ACCESSORIES: FUME EXHAUSTER NOTE: AUTOMATIC NOZZLE CHANGE Ledpjvghbqjfx Ab Uoah

Condition: used, Year of construction: 2017, operating hours: 56,681 h, laser power: 4 W, 2017 Laser cutting machine with changing table and pipe cutting function. DURMA HD-FL 3015 BH / IPG 4kW – Manufacturer: DURMA – Model: HD-FL 3015 III BH-IPG 4kW – Year of manufacture: 2017 – Laser source: IPG – Control system: SIEMENS + CAD software + nesting software – Operating hours: 56,681 h Technical data: – Working area: 3000 x 1500 mm – Pipe cutting diameter: Ø 12 – 400 mm – Laser power: 4000 W (fiber laser) Maximum thickness parameters of cutting materials: – Black steel: up to 12 mm – Stainless steel: up to 10 mm – Aluminum: up to 10 mm – Copper: up to 4 mm – Brass: up to 6 mm Additional functions: – IPG fiber laser resonator Laedsvyhczspfx Ab Ujh – Water cooling system for laser source and cutting head – Extraction and filtration system under and above the laser – Double table system – Pipe laser with 4-point chuck and can cut up to 6 m – CAD software – Nesting software – Pipe laser software – Very good condition, annual service performed 2024.12. If you have any more questions, we will be happy to answer.

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 70 mm MAX ADMITTED LOAD: 750 Kg/m WORKING AREA: 3000 x 1500 mm SOURCE: IPG Fiber 4000 ; 4000 W Laodpfoxcqrgox Ab Ueh CONTROL UNIT: ByVISION WEIGHT: 13000 Kg

Condition: good (used), Year of construction: 2012, The Prima Power Platino FIBER is in good condition, one owner, always serviced on time by Prima Power service representatives. For sale complete with storage. All documentation, service reports are included. Recently serviced with a full annual service. Laser cutting machine is connected, available for inspection, testing, in Ukmergė. Lajdsqi D Sqspfx Ab Ush Specification: Model. Serial No.: 776 E 308 Year of manufacture: 2012 Made in: Italia Power: Working area (X x Y): Weight: Laser working hours: 61484 Cuts up to: 5 mm Location: Ukmergė Available for testing: Yes If you have any further questions, we will be happy to answer them.

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 70 mm MAX ADMITTED LOAD: 750 Kg/m WORKING AREA: 3000 x 1500 mm SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: ByVISION Ljdevcr Tpjpfx Ab Ueah ACCESSORIES: PORTABLE HANDWHEEL NOTE: AUTOMATIC NOZZLE CHANGER

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Motor power: 4kW Lasdpjq Hdwusfx Ab Ujh Weight: 2 300 kg Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in: Switzerland If you have any further questions, we will be happy to answer them.

Year of construction: 2018, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 150 mm RAPID FEEDS X-Y-Z: 100 - 100 m/min WORKING AREA: 3000 x 1500 x 150 mm SOURCE: IPG Fiber 4000 ; 4000 W CONTROL UNIT: PRIMACH 30L WEIGHT: 10000 Kg OVERALL DIMENSIONS: 10500 x 3400 x 2200 mm Laodpfx Aevghb Deb Ush

Condition: used, Year of construction: 2017, Plasma cutting machine from 2017, little used, made in Turkey. Fully operational. Currently selected. Technical Parameters Table surface: 2 500x 12000 mm Plasma generator: AJAN PP 260 (Precision Plasma 260 A ) Machine bridges: 1 PCS Plasma burner: Ajan (1 pc.): Gas burner: AJAN (1 pc.) + with optical ignition CNC systems: CNC control, Linux Standart equipment Ventilated width of the work table: 2500 mm Ventilated length of the work table: 12000 mm Maximum size of the sheet: 2500 x 12000 mm Quantity of bridges: 1 unit. Plasma system: PP 260 Ajan Current: 30A, 80A, 130A, 260A Cutting Ability (low-carbon steel): 32 mm Cutting Capacity (stainless metals): 20 mm Maximum piercing of holes: 40 mm Max. Cutting ability (cut from edge): 100 mm Max. Cutting capacity of the gas head: 150 mm Maximum cutting speed (theoretical): ~ Almm/min (actual speed depends on the material, brand and thickness of the piece) Positioning max: 15 m/min Re- positioning max: +/-0.01 mm Taper angle in accordance with ISO 9013 standard "range 3′ Gases for cutting: 02, N2, F5, H35 Protection: compressed air Ventilation of the table: mechanical valve Filtering: JET filter AJF Functions - a bridge controlled by two 2-way servomotors of the AC type - automatic ignition of the gas burner - automatic gas control (for plasma and gas cutting) - automatic burner height control (plasma) THC - the function of "ohmic control" - function "ARC control" - function "Microjoint" - function marking with a plasma head Control - programmable possibilities with DIN/ISO codes - Ability to work with DXF, ESSI, and NC toolpath files - Ventilator and generator for remote start and remote control with CNC - AJAN-CAD - AJAN-i own control - AJANCAM V 7.0 - AJAN-i own software The start package Include: 20 electrodes, 20 nozzles, 20 nozzle covers, 2 gas rings, 2 nozzle rings and coolant required to start the machine. AJAN-i CNC LINUX NEW from 2017! AJAN CNC based on the LINUX operating system "Allinclusive" Control Panel - Free AJAN-CAD V 7.0 - Free software updates - Geometric Shape Catalog Automatic restart if stopped (power) - Possibility of programming DIN / ISO G codes - Ability to work in DXF, ESSI trajectories and NC files - Wide selection, tuning and recording of the program - Automatic selection of material and parameters (customize) AJANCAM v 7.0 AJANCamv7.0 was developed by its own software configuration, which has the following features: - Easy to use, fast and efficient - Automatic errors, provisioning - Ability to write a text - its own directory (libary) - Automatic or manual placement Lasdpfx Ajrf S Tbsb Uoh - Cutting sequential modelling - According to the automatic layout of DXF and G-codes ESSI making The total ared: 384 m2 Filtration elements: 16 Elements of Noise filter: 85 dBA Ventilation Fan power: 11kW Feature blow dry with compressed air If you have more questions, welcome.

Year of construction: 2018, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES RAPID FEEDS X-Y-Z: 95 - 100 m/min MIN CIRCULAR SECTION: ø20 mm MAX CIRCULAR SECTION: ø230 mm MAX SQUARE SECTION: 160x160 mm MAX RECTANGULAR SECTION: 20x170 mm SOURCE: MAXPHOTONICS ; 2000 W CONTROL UNIT: BODOR Ledpfx Aow D S Rvjb Ueah NOTE: MAX LOADING LENGTH 6500mm

Condition: used, Corner cutting machine GOAL 209/V. Specification: Model:GOAL 209/V Adjustable angle For metal up to: 6 mm Other: not clear if it works Ledpfx Abeqlanke Ujah If you have any further questions, we will be happy to answer them.

Year of construction: 2019, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES MIN CIRCULAR SECTION: ø12 mm MAX CIRCULAR SECTION: ø 168,3 mm MAX SQUARE SECTION: 140X140 mm MAX RECTANGULAR SECTION: 150X100 mm MAX ADMITTED LOAD: 25 Kg/m Lajdpfxexfm Amo Ab Ueh SOURCE: FIBER 3000 ; 3000 W NOTE: AUTOMATIC/SEMI-AUTOMATIC LOADING SYSTEM 6,1 m; UNLOADING 4,5 m

Condition: used, Year of construction: 2015, Specification: Model: Forstner Compact Access Pro Made in: Austria Year: 2015 Working width: 1250 mm Thickness: 1 mm Ribbed knives: 5 Straightening rollers: 6 Shearing: guillotine Controller: Siemens SPS S1 Pickup: April Laodpfsv Ac Anex Ab Ujh If you have any more questions, we will be happy to answer them.

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Racks Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Shelf load capacity: 3T Lodsww Sy Dspfx Ab Ueah If you have further questions, we will be happy to answer them.

Condition: used, Year of construction: 2005, laser power: 4 W, Laser cutting machine FIN POWER L6-A. Very good condition, serviced every six months and major service every 4 years. Full history, service reports included. The machine is connected, can be tested, inspected. Specification: Model: Fin Power L6-A Year of manufacture: 2005 Power: 4 kW Working area (X x Y): 1500 x 3000 mm Lasdpfxjwdtrne Ab Ush Working hours: 90,000 resonator worked Cutting: 20 mm black metal, up to 15 mm very clean. Stainless steel up to 12 mm. Aluminum up to 8 mm. Zinc up to 3 mm. Other: Interchangeable tables, two lenses Location: Kaunas Can be tested: Yes If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 2021, Used Air-Works PQC 3015 plasma cutting machine for plasma cutting of sheet metal material. Specification: Model Air-Works PQC 3015 Ledpfxoq Ukuts Ab Ueah Year: 2021 Table: 1500 x 3000 mm steel Weight: 1680 Other: with Hypertherm Powermax 65 If you have any further questions, we will be happy to answer them.