Used Punch for sale (1,625)

Year of construction: 1994, condition: used, machine/vehicle number: 20542, Lg.no. 24238 Technical data: - Pressure capacity at 10 bar 60 kn - Plunger stroke 40 mm - Projection 100 mm - Installation height approx. 140 mm - Table size approx. 280 x 200 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar Itodpfxsviuk Rs Affjr - Space requirement approx. W 800 x H 1450 x D 1000 mm - Weight approx. 160 kg - with: - Foot pedal - original machine base frame - Pressure gauge + pressure regulator - Round shuttle table for 6 punching tools - Various punching tools

Year of construction: 1985, condition: good (used), Bobst SP 130 E Year 1985 Max.size: 920x1300 mm Min.Size: 450x580 mm Max.Speed: 7000 Sh/h Max. cutting force Cutting force: 500 T Centerline Itodpeif Ed Dofx Affsr Immidiately available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Itedpfxjw Suwyj Affor Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Year of construction: 2008, condition: ready for operation (used), Punching force: 220kN, working range combined operation X/Y: 2585mm/1650mm, working range punching operation: 3085mm/1740mm, working range laser operation X/Y: 3085mm/1650mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 230kg. Positioning speed: 109m/min, max. stroke rate: 900 strokes/min, max. marking rate: 2800 strokes/min, tool positions: 18, accuracy: +/-0.1mm. Machine dimensions X/Y/Z: approx. 8000mm/9000mm/2500mm, weight: approx. 22500kg. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Isdpfx Aoxddagoffetr

Condition: used, functionality: unexamined, Used TRUMPF CS 75 Punching Machine for Sale For sale is a robust and well-maintained TRUMPF CS 75 punching machine – ideal for industrial metalworking applications. Technical specifications: Model: TRUMPF CS 75 Iodpfjxb Aytox Affotr Punching force: 75 kN (7.5 MPa) Type number: 8206 Machine number: 1129 Connection: 380 V / 50 Hz / 5.3 kVA Compressed air connection: 6 bar Motor (Himmel Tübingen): 3~ 220/380 V 8 kW, 25 A 615 Nm torque 600 rpm Condition: Used Many tools included. Operating manual included.

Year of construction: 2004, condition: good (used), Bograma die-cutting machine Proprietary control system Itsdpfxowt A R Ej Affer Equipment: 4 x waste removal units Head and foot trimming unit

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Isdpfx Aoit T Hyeffstr Technical data: - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Isdpfx Afedzqmzefotr Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, punching force: 28 t, workpiece length (max.): 1,000 mm, workpiece width (max.): 2,000 mm, TECHNICAL DETAILS Sheet width: 2,000 mm Sheet length: 1,000 mm Punching force: 28 t MACHINE DETAILS Machine weight: approx. 11,000 kg Ijdpfx Asw Suvvoffotr EQUIPMENT - Various tools

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Ijdpfx Ajw Uk A Roffotr

Condition: excellent (used), Punch St 225 Hydropneumatic, air consumption 9l/per stroke Ram stroke 30 mm Itjdpfx Aet Sigzjffjr Punch pressure 3600 Kp at 6 bar 6000 Kp at 10 bar Pressure ratio 1:6 Foot switch Projection 100 mm, table surface 280 x 200 mm Weight 60 kg

Condition: good (used), Year of construction: 1995, Technical data: - Pressure capacity 250 KN - max. sheet thickness 6 mm Itjdshikdajpfx Affjr - max. punching diameter 90 mm - stroke 42 mm - throat 500 mm - maximum stroke rate 200 H/min - connected load 4 kW - space requirement LxWxH 1000 x H 1750 x D 1400 mm - weight approx. 1600 kg

Condition: good (used), Year of construction: 1993, Offer 23481 Technical data: - Pressure capacity 30 T - max. sheet thickness 6 mm - Max. punching diameter 105 mm - stroke 42 mm - throat 700 mm - maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - table height 1000 mm - Drive 400 V / 4 kW Isdpfx Afjrgptijfjtr - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - with: - stop table with adjustable stops - Quick stamp change device - foot switch; - Emergency stop button - Various punches + dies in separate workbench

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Itodpfjdzqlvox Affjr Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Condition: good (used), Year of construction: 2000, functionality: fully functional, punching force: 28 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, TECHNICAL DETAILS Pressing force: 28 t X-axis: 2000 mm Y-axis: 1000 mm Ijdow Suu Sepfx Affetr MACHINE DETAILS Machine weight: approx. 11000 kg

Condition: ready for operation (used), Year of construction: 2004, Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Itedpfew Sxyfsx Affjr

Condition: excellent (used), Carousel punch P160D Isdpot S S Egofx Affotr

Condition: good (used), functionality: fully functional, machine/vehicle number: 057400108, Manufacturer: Bobst, Switzerland Model: SP 142 Machine Category: Die Cutting Machine Machine Type: Autoplaten Year of Manufacture: --- (not specified) Machine Number: 057400108 Iedpow Rb Ebsfx Affstr Technical Specifications: - Max. Sheet Size: 1420 x 1020 mm - Min. Sheet Size: 700 x 500 mm - Speed: up to 4,500 sheets/hour (depending on job) - Power Supply: 380 V, 50 Hz Features: - Robust Swiss design - Mechanical control with side operator console - Pile feeder and delivery for continuous operation - Suitable for cartonboard and corrugated board - Proven model for packaging production

Condition: good (used), OFFER 70105 Technical data: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm - 2 x 68 , 2 x 80 , 81 , 85 mm Iodpfx Aog T S Axoffetr - oblong hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Punch holder 58 mm - punch height 54 + 58 mm - Adapter ring for punch - die height 30 + 40 mm - die outer diameter 90 + 140 mm - adapter ring for dies 90 - 140 mm - Weight approx. 90 Kg

Condition: ready for operation (used), Year of construction: 2000, Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Itsdpsw Sxylefx Affjr

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm Itodpfxorll I Ue Affor - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: ready for operation (used), Year of construction: 2003, Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Itedpfx Ajw Sxyrsffsr

Condition: ready for operation (used), A cart beam die-cutter Schön is available for die-cutting envelopes, leather, textiles, foams, rolls and sheets. Pressing force: 300kN, max. sheet format X/Y: 1400mm/1000mm, pressure plate rotation speed: 200°/s, repeat accuracy: +/-1°, return stroke speed: 200mm/s, machine dimensions X/Y/Z: approx. 4200mm/2500mm/2500mm, weight: approx. 5500kg. Documentation available. On-site inspection is possible. Ijdpfx Afew Azuujfetr

Year of construction: 1995, condition: ready for operation (used), A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible. Ijdjwftdgjpfx Affetr

Condition: ready for operation (used), Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps. Isdpfxot Amdrs Affjtr