Used Pump Station for sale (13,004)

Condition: reconditioned (used), Year of construction: 2016, Technical specifications: Product number V-VC 150 Year of manufacture 2016 Engine power 3 kW Capacity 150 m3/h Maximum vacuum 1.1 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 90 kg Dimensions [h x l x w] 7011 x 281 x 310 mm The pump achieves a vacuum of 1.1 mbar, as confirmed by the measurement on the sensor in the video attached below. After oil service New oil New exhaust separators Lsdpfezvrnisx Apmehk Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and its dependence on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2013, Technical specifications: Product number: WP 0500 D 4V1 Year of manufacture: 2013 Capacity: 500 m3/h Maximum vacuum: 0.1 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. Lhedpfozvrm Ejx Apmsk New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: excellent (used), Year of construction: 2016, Technical specifications: Product number CB 0250 B Year of manufacture 2016 Engine power 7.5 kW Capacity 250 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar in the large section and 2.1 mbar in the small section. The pump is in perfect condition after a major overhaul. New bearings, seals, oil filter separators, and oil. Oil-lubricated vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. Lsdpfxezvrmre Apmohk The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Technical specifications: Product number RA 0250 D 5ZI Engine power 5.5 kW Capacity 250 m3/h Max. vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Lsdpfx Aezvrmfspmjhk Dimensions [h x l x w] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.5 mbar, as confirmed by the recorded video. The unit has undergone a major overhaul. The pump is in very good condition, with new filters, oils, separators, etc. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, kinetic, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with such a pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number WV 2000 C 001 Year of manufacture Lhsdpfx Ajzvrluopmjk 2015 Capacity 2000 m3/h Max. vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video.

Condition: excellent (used), Year of construction: 2022, Technical specifications: Product number RD 0360 A 5H3 Year of manufacture 2022 Engine power 7.5 kW Capacity 300 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar, which is confirmed by the measurement on the sensor in the video attached below. 4.8 -1 on the sensor display means a vacuum of 4.8 to the power of minus one, which equals 0.48 mBar. After major overhaul. The pump is in perfect condition. Lodpfx Ajzvrh Aspmshk New oil. New oil filter. New exhaust separators. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), overall weight: 11 kg, Technical specifications: Product number RA 0400 B 4ZI Engine power 11 kW Capacity 400 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1100 rpm Weight 350 kg Dimensions [h x l x w] 1411 x 981 x 1410 mm The pump achieves a vacuum of 0.5 mbar, which is confirmed by our recorded video (5.8 to the power of minus 1 on the sensor indicates 0.58 mBar). The unit, after a major overhaul, operates like new. New seals, filters, and separators. Oil-lubricated vacuum pump, suction – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. Ljdszvrhpepfx Apmjhk The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2014, Technical specifications: Product number Ledpozvrg Eefx Apmohk VWP 1500 Year of manufacture 2014 Capacity 1000 m3/h Maximum vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: used, axle configuration: 3 axles, first registration: 01/2018, total length: 13,480 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Air suspension Lhodpezvrbvefx Apmjk - Disc brakes = Further Information = Tire size: 385/65 R22.5 Axle brand: MERCEDES Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Unladen weight: 7,820 kg Payload: 30,178 kg GVW: 38,000 kg Dumper: Left / Rear

Condition: used, Year of construction: 2008, WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 Tool diameter max. 300 mm Tool length 0 - 240 mm Radial measuring range (radius) 150 mm Non-contact measurement of tool dimensions, radius (R) and height (H), with display on electronic digital displays. Electronic digital displays providing information on tool radius and height. HSK63 tool holder for PowerLock tools. Lhjdpfezvpw Ijx Apmsk NEW: PowerLock adapter HSK63, shank D=50 x 260 mm.

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) Ljdpfxszhnafs Apmjhk - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: new, functionality: fully functional, Thick turret punch tool for Amada, Lvd, Finn-power, Euromac, Yawei, JFY Original style punch compatiable for Amada/Mate guide holder Quick adjustable style compatiable for Mate/Wilson 90 guide holder Standard shape as Round, rectangle, Square, Ob-long, triangle Lhsdpfxjiq Di Ae Apmok Special shape, emboss tool, countersink tool, lance & form tool, bridge tool, louvre tool, blank out tool, dimple tool, etc.

Condition: excellent (used), Year of construction: 2023, BINDER VD 56 Vacuum Drying Oven with VD-M 53 Pump Module Manufacturer: BINDER GmbH Type: VD 56 Year of Manufacture: 2023 Machine Type: Vacuum Drying Oven Internal Volume: 55 liters Maximum Temperature: 220 °C Offered is a BINDER VD 56 vacuum drying oven from 2023, including a matching BINDER VD-M 53 pump module and a BINDER VAP 1 vacuum pump. The system is designed for gentle drying of materials under vacuum conditions and is particularly suitable for laboratory, research, development, quality control, and industrial process applications. Technical Data: Manufacturer: BINDER GmbH Model: VD 56 Article Number: 9630-0002 Version: VD056-230V Year of Manufacture: 2023 Internal Volume: 55 l Temperature Range: +9 °C above ambient temperature to +220 °C Heating Time to 100 °C: approx. 80 min Spatial Temperature Deviation at 100 °C: ± 1.2 K Temporal Temperature Deviation at 100 °C: ± 0.1 K Leak Rate: 0.01 bar/h Vacuum Connection: DN 16 Measurement Port: DN 16 Rated Voltage: 200–230 V Mains Frequency: 50/60 Hz Rated Power: 1.4 kW Protection Class: IP20 Made in Germany Pump Module: Manufacturer: BINDER GmbH Type: VD-M 53 Article Number: 8012-1943 Year of Manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current Consumption: 8.0 A Phase: 1N~ Protection Class: IP20 Vacuum Pump: Manufacturer: BINDER GmbH Type: VAP 1 Article Number: 5013-0217 Year of Manufacture: 05/2023 Pumping Capacity: 2.0 / 2.2 m³/h Ultimate Pressure: < 7 mbar Voltage: 230 V Frequency: 50/60 Hz Current Consumption: 1.6 / 1.5 A Protection Class: IP40 Dimensions: VD 56 without attachments and connections: Width: approx. 638 mm Depth: approx. 461 mm Height: approx. 815 mm Internal Dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net Device Weight VD 56: approx. 96 kg Ljdpfozt R D Rox Apmshk Maximum Load per Shelf: 20 kg Maximum Total Load: 60 kg Equipment: Digital controller with pressure and temperature display Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measurement port DN 16 Safety glass pane with splinter protection Large viewing window Insert shelf BINDER VD-M 53 pump module BINDER VAP 1 vacuum pump Vacuum and connection hoses Connecting and mounting parts Operating and assembly instructions Further accessories as shown in the pictures Shipping Data: Weight VD 56: approx. 96 kg Due to size and weight, shipping by freight forwarder is required. Condition: Used Year of Manufacture 2023 Optical condition as shown in the pictures Nameplates are present Scope of Delivery: 1 × BINDER VD 56 Vacuum Drying Oven 1 × BINDER VD-M 53 Pump Module / Pump Cabinet 1 × BINDER VAP 1 Vacuum Pump Vacuum and connection hoses Connecting and mounting parts Connection cables Operating and assembly instructions Accessories as shown in the pictures The unit is available for short-term delivery. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, functionality: limited functionality, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Ledpfx Apszivhtomehk Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: good (used), Water jet high-pressure pump, high-pressure pump for water jet cutting, water jet cutting, water jet cutting system, pressure boosting cylinder, pressure boosting -Manufacturer: Deter Fluidtechnik, high-pressure pump for waterjet cutting with water tank and feed pump -High-pressure pump: Type PP1205/110V -Centrifugal pump: Calpeda NM 1/AE -Container: Stainless steel -Individual components: see photos -Dimensions: 1580/410/H600 mm Lhedpfx Apezfgb Aemok -Weight: 118 kg

Year of construction: 2023, condition: new, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Lhjdpszt Iq Ujfx Apmok

Condition: excellent (used), Year of construction: 2022, Wangen Twin NG70 Screw Pump Lhedpfszt Ibgjx Apmok 2022, Stainless, designed to reliably pump low to high viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The hygienic pump for food and beverages, chemicals and cosmetics. With touch screen HMI screen controls, all on mobile stainless skid, 3Ph

Condition: used, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 Lhjdeuif Iuopfx Apmjk 16 bar max. 110 degrees Celsius 60m3/hour 20.2m height n 2900 rpm The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: new, In original box. Never used Pfeiffer Adixen Alcatel ATH 1600 M Turbomolecular Vacuum Pump - Lhjdpfjfyla Aex Apmek 5-axis magnetically levitated turbopump with drag stage for a pump speed of up to 1,400 l/s for N2.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 16002, Pump capacity: Adjustable from 1 to 55 liters per minute, depending on the application. Control: Equipped with a 7-inch color touchscreen and smart sensors for monitoring water and mortar temperature, pressure, and humidity. Advanced technology: Patented mixing tools ensure a homogeneous mass without lumps. Maximum particle size: Can process materials with a particle size of up to 6 mm. Smart maintenance: Built-in MAIiCONNECT software for remote diagnostics and software updates. Lsdpozu Rynjfx Apmjhk

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, overall weight: 151 kg, total length: 1,174 mm, total width: 644 mm, total height: 528 mm, volume flow: 250 m³/h, power: 5.5 kW (7.48 HP), type of cooling: air, Becker VTLF 2.250 vacuum pump – manufactured in 2023 For sale is a Becker VTLF 2.250 vacuum pump from our carpentry workshop. The pump was purchased new in 2023 and, according to our assessment, has fewer than 100 operating hours, as it was only used very rarely. It is in very good condition and, to the best of our knowledge, is technically flawless. The original invoice from 2023 is available and can be viewed if there is serious interest. The VTLF 2.250 is a dry-running rotary vane pump designed for rough vacuum and continuous operation. It uses self-lubricating vanes made of a graphite composite, requires minimal maintenance, and does not require oil changes. Suitable for, among other applications, CNC vacuum tables, vacuum clamping systems, membrane presses, handling equipment, and other applications in the wood, plastics, and industrial sectors. Technical data: Manufacturer: Becker Model: VTLF 2.250 Year of manufacture: 2023 Designation: VTLF 2.250 C300127 Operating hours: approx. 100 Dry-running rotary vane pump for rough vacuum Oil-free Designed for continuous operation Self-lubricating vanes made of graphite composite Low maintenance No oil change required Total power consumption: 5.5 kW Dimensions L/W/H: approx. 1,174 × 644 × 528 mm Weight: approx. 151 kg Inspection possible by arrangement. Lhjdpfxjzi A D Io Apmok Location: Rebgeshain Sale from the location, without transport. Collection or shipping via a freight forwarder can be arranged. Price: €3,500 net, negotiable Sale exclusively to commercial customers. Used machine sold as is, with exclusion of any warranty for defects. No guarantee. Subject to prior sale.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: D3062953, total length: 960 mm, total width: 480 mm, total height: 320 mm, volume flow: 160 m³/h, power: 7.4 kW (10.06 HP), input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,700 rpm, Becker vacuum pump, fully functional after a complete overhaul. Lhsdpfxjzu Nh Do Apmjk

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Thielmanni nozzle cleaner SICK curtains Installed 2021 Lodpfxjzu Irnj Apmohk Robot station is fully operational, in good condition and can be seen in use.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, LANG Embossing Station 52610 for Macro-Grip® Clamping Technology Offered is a LANG embossing station, type 52610, for preparing raw parts for the proven Macro-Grip® clamping system from LANG Technik. The embossing station enables the embossing of the clamping contour into raw materials, thus ensuring a positive, process-reliable workpiece clamping during 5-axis machining. Equipment: Manufacturer: LANG Technik Type: 52610, older version Embossing station for Macro-Grip® clamping technology Positive pre-embossing of raw parts High process reliability during machining Robust industrial design Simple and fast operation Advantages: Maximum holding forces with low clamping height Optimal accessibility for 5-axis machining Reduction of vibrations and workpiece movements Fast and reproducible workpiece preparation Ideal for raw materials in single-part and series production Application areas: Lhjdpfx Apezu Imfemsk CNC machining centers Tool and mold making Job manufacturing Single-part and series production 5-axis machining of raw parts Used, fully functional. Normal signs of wear and tear corresponding to age and use. Scope of delivery: LANG embossing station with clamping jaws Accessories according to photos or upon inspection Inspection and functional test possible by arrangement. Shipping or pickup by agreement.

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 38,000 kg, empty load weight: 11,820 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, Year of construction: 2006, operating hours: 9,184 h, We are selling our Bremat F2.15, manufactured in 2006, with a current operating time of 9,184 hours. The system is in good, age-appropriate condition and shows the usual signs of wear and tear. It is fully functional and ready for immediate use. Until recently, we were still using the system ourselves in our ongoing operations. The sale is solely due to the purchase of new equipment. Data & Condition: Manufacturer/Model: Bremat F2.15 Year of manufacture: 2006 Operating hours: 9,184 h Condition: good, age-appropriate signs of wear and tear Fully functional and ready for immediate use Next TÜV inspection due 08/2026 A new TÜV inspection can be carried out upon request and after consultation Sale is made with the system deregistered The upper cover sheet is missing and would need to be replaced. However, this does not affect the function or operational readiness of the system. An inspection of the system is possible by prior arrangement. Further information and pictures can be provided upon request and with serious interest. Lodpfx Aezu Iiyopmjhk The system is sold as a used semi-trailer in its current condition.