Used Proxxon Sd 300 Lathe for sale (18,771)

Condition: good (used), 1 used, very well-maintained L+Z centre lathe with 3-axis digital readout, brand HEIDENHAIN model VRZ 773 B Make: VDF Heidenreich + Harbeck, Origin: Germany Model: S 500 Year of manufacture: 1966 / geometrically overhauled in 1998! Technical data: Centre height: 250 mm Centre distance: 1000 mm Swing Ø over bed: 530 mm Swing Ø over cross slide: 280 mm Spindle bore: 62 mm Spindle mount: DIN 55027, size 8 Speed range, 24 steps: 9 – 1800 rpm Longitudinal feed: 0.0071 – 2 mm/rev Cross feed: 0.0028 – 0.8 mm/rev Thread pitches: Metric: 0.2 – 224 mm Inch: 1/8 – 140" Module: 0.05 – 56 M Diametral Pitch: ½ - 400 DP Tailstock taper: MK 5 Drive power: 15 kW Space requirement L x W x H: 3500 x 1350 x 1350 mm Weight: 2650 kg Accessories / Special features: • 3-axis digital readout system HEIDENHAIN model VRZ 773 B • 3-jaw chuck Ø 315 mm, make FORKARDT F 315 with safety pin • 1 set of hard top jaws with hard master jaws • Quick-change tool post system MULTIFIX size B with 1 insert • High drive power 15 kW • Coolant system Rsdsyf H Ukspfx Adasn • Chip tray • Bed stop New electromagnetic brake installed in 2021 for €5,800.00 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements Redpfeyf H Dxjx Adasn

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm Rsdpfxoyf H Dfe Adaen turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Rodpfoyf Hyysx Adasn Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Year of construction: 2006, condition: used, total length: 4,300 mm, total width: 2,100 mm, total height: 2,100 mm, Empty weight: 5.000 kg Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Siemens - Power [kW]: 30.0 - Swing over bed [mm]: 350 - Distance between centres [mm]: 600 - Bed width [mm]: 210 - Spindle bore [mm]: 62 - Max. spindle speed [rpm]: 3500 - Options: Chip conveyor, Three-jaw chuck, Bar feeder, Live tools, C-axis - X-axis travel [mm]: 271 Rodjyf H Ahepfx Adajn - Y-axis travel [mm]: 600 - Transport dimensions: 4300mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Rodpfx Adex I Rtksajn Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: used, Platters 300cm/125cm Redpfx Adjyf Enioasn divisible into 3 pieces 380V Cold press

Condition: excellent (used), For sale is a Drechselmeister MIDITEC FU-175 wood lathe with a centre distance of approx. 400 mm. The used machine is in excellent condition. Technical data: - Centre height: 175 mm - Centre distance: 400 mm (extendable) - Infinitely variable speed control - 3 main speed ranges - Spindle thread: M33x3.5 mm - MK2 taper in tailstock and headstock - Motor power: 0.7 kW / 1 HP Rsdpfx Asyf Duuodaen The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: wood lathe, lathe, turning machine, woodturning, turning tools, wood turning, machine Reference: R-Y032A

Condition: excellent (used), Year of construction: 2004, Please read the technical specifications thoroughly. If you are considering this machine as a potential investment, we kindly request your complete credentials with an accurate telephone number and email address in order to submit an offer. We are offering an exceptionally high-quality precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, incl. CE certificate and central lubrication Machine no.: T1022.2027-00 Centre height: 240 mm Swing over bed: 500 mm Swing over cross slide: 285 mm Centre distance: approx. 1,200 mm Turning length (effective): approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill travel: 190 mm Tailstock taper: MK 5 Space requirement: approx. 4,000 x 1,525 mm (L x W) Weight: approx. 4,300 kg Accessories included: - 3-axis digital readout HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip protection rear wall - Röhm lathe chuck T 250 mm incl. various clamping jaws - Telescopic cover for leadscrew and support to bed - Machine lamp - Multifix C tool post + 4 holders - Live centre - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slide Condition: The machine is in very good technical and visual condition. Backlash in cross slide: approx. 0.3 mm, top slide: approx. 0.15 mm Spindle nose runout: approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over 750 mm of bed length (measured on flat guideway with dial indicator towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for engagement lever replaced - Locking pin for engagement interlock replaced Net price EXW. Delivery with our own truck can be offered for an additional charge. Rjdpfx Adow Rdtheaen

Condition: excellent (used), Please read the technical specifications thoroughly. If you are considering the machine as an investment, we kindly request that, for an offer to be made, you provide full identification along with a correct phone number and email address. EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital display Year of manufacture: 2007 with CE marking Centre distance: 700 mm Centre height: 170 mm Swing over bed Ø 340 mm Swing over cross slide Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Rodpfoxx S R Asx Adaen Carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Distance from turning centre to top slide: 34 mm Top slide (compound) swivel range: 60 / 120° Main spindle: Spindle mounting: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Front bearing spindle diameter: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. face plate diameter: Ø 200 mm Spindle speeds: 40 - 3000 rpm Stepless speed control Number of mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at drive spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045 - 0.787 mm/rev 20 (28) cross feeds X: 0.023 - 0.406 mm/rev Threads: 20 (28) metric threads (standard) Pitch: 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MK 3 Quill stroke: 120 mm Offset: ±13 mm Permissible workpiece weights: (between centres) 50 kg, supported by tailstock 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and vocational training. Equipment: - EMCO 3-axis digital display with colour screen - Potentiometer, EMERGENCY STOP button, speed digital display on control panel next to digital display - 3-jaw chuck - MULTIFIX tool post head size B - Electrically interlocked chuck guard - Quick-collet clamping device - MICROJET coolant spray system - Chip guard (rear wall) - Machine lamp - Machine feet - Bed stop Condition: Very good, from a training facility "Due to its quality and price, this machine is not suitable for private individuals." Available from March 2026.

Condition: reconditioned (used), Please read the technical specifications in full. If you are considering this machine as an investment, we kindly request your complete credentials including a valid telephone number and email address in order to provide you with an offer. We are offering an exceptionally good precision lathe here. In its class, this machine is perhaps the best German-built lathe ever made. BOEHRINGER Precision Lathe Model DUE 800 Year of manufacture: 1984 Machine No.: 04041.01-807 Centre height: 400 mm Swing diameter over bed: 820 mm Swing diameter over cross slide: 515 mm Distance between centres: approx. 2200 mm Effective turning length: approx. 2000 mm Bar capacity: 128 mm Spindle nose: DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 spindle speeds: 7.1 – 1400 rpm 60 cross feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Rsdpfx Aort T S Rodajn Rapid traverse in longitudinal and cross-slide Powered compound slide Tailstock quill stroke: 280 mm Tailstock taper: MK 6 Required space (LxWxH): approx. 6700x2500x2250 mm Weight: approx. 7,500 kg Accessories: - 3-axis HEIDENHAIN digital readout - Coolant system - Chip guard rear wall - Autoblock 500 mm hydraulic chuck with jaws - Telescopic cover for lead and feed shaft and support to bed - Machine lamp - Chip conveyor - Parat toolholder base incl. 11 holders - Extraction unit - 3-jaw steady rest with roller inserts (live) - Emergency stop - Chuck key - Live centre - Operating manual Condition: The machine is in very good technical and optical condition. Backlash on top slide is 0.1 mm and on cross slide 0.15 mm. Machine geometry is also very good (verified with dial gauge) Measured on flat-bed guideways with dial gauge towards the chuck. Bed wipers replaced, gearbox input shaft axial play compensated and bearings replaced, drive pins motor/gearbox side renewed, shaft seals on apron renewed, various bearings replaced. The machine can be demonstrated under power. Function videos can be provided on request.

Condition: good (used), Please read the technical specifications thoroughly. If you are considering the machine as an investment, we kindly ask that you provide full identification with a valid telephone number and email address when requesting a quotation. WEILER Precision Lathe MADADOR with HEIDENHAIN 3-axis digital readout Year of manufacture: approx. 1980, retrofitted with emergency stop and electrically interlocked chuck guard. Centre height: 145 mm Centre distance: 500 mm Swing over cross slide: 160 mm Spindle nose: DIN 55022 Gr. 5 Spindle bore: 36 mm Rodexx S Hdopfx Adasn Speed range: 30 – 3,000 rpm Motor power: approx. 3.0 kW Tailstock quill: MT 3 Quill stroke: 90 mm Weight: approx. 620 kg Dimensions (LxWxH): 1420 x 700 x 1200 mm Technical data subject to confirmation! Robust lead and feed screw lathe suitable for workshops and professional hobbyists. Condition: Good Equipment: - 3-axis precision digital readout HEIDENHAIN - Lever quick-action collet chuck - Electrically interlocked chuck guard - Multifix toolpost head size A - 3-jaw chuck - Coolant system - Machine feet - Chip guard at rear - Machine lamp - Bed stop - Emergency stop button - Lockable tool compartment - Automatic feeds for longitudinal and cross slide Safety features: - Electrically interlocked chuck guard - Emergency stop button - Brake motor Available from March 2026

Condition: as good as new (ex-display), The TDM S 430/1000 is a highly versatile Conventional Horizontal Lathe from KNUTH, designed to meet the demands of both single part and small batch productions in tool making and device construction. With an inverter that allows spindle speeds of up to 2,000 rpm and a user-friendly control panel, this lathe is ideal for training applications. Its robust construction features a one-piece heavy-duty cast-iron bed, ensuring increased rigidity and stability during operation. A modern 3-axis position indicator, adjustable longitudinal stops for automated feed shut-off, and a powerful coolant system further enhance its functionality. The TDM S 430 also includes an easy-to-read digital display for spindle speed, ergonomic selector levers for effortless control, and comprehensive standard equipment such as a 4-station tool holder and a robust LED work lamp. Experience precision and efficiency in your machining tasks with the TDM S 430/1000. Request a quote today to explore how this exemplary Conventional Horizontal Lathe can elevate your production capabilities. Rsdpfx Adjuyg Dnsaen

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm Rodetr Ud Sopfx Adasn turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: excellent (used), Year of construction: 2013, Working area Chuck diameter 160 mm Weight max. 86* kg Swing diameter 200 mm X-travel (working stroke) 380 mm Z-travel 660 mm Loading time (depending on clamping device) 1 – 2 sec. Main spindle 2 number Spindle flange according to DIN 55026 5 size Spindle bearing – Ø front 80 mm Maximum speed 6000 rpm. Main drive, see description 2 number Feed drive Rapid traverse speed, X 60 m/min. Rapid traverse speed, Z 60 m/min. Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Disc turret, see description Electronic equipment in accordance with VDE 0113 Operating voltage 400 V Control voltage direct current 24 V -alternating current 230 V Frequency 50 Hz Connection value Connection power without Lt 36 kW Connection power with Lt 39 kW Rjdpfx Asvz S Sisdaon Rated current 64 A Supply line fuse 80 A Dimensions and weight Depth 2800 mm Depth including chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Condition: excellent (used), Year of construction: 2012, Accessories included. CNC Control: Fanuc-18i-MB Working area X travel: 350 mm Z travel: 1600 mm C travel: 360° Swing diameter over bed: Ø 940 mm Max. standard turning diameter: Ø 366 mm (10-position standard turret) Maximum turning diameter: Ø 550 mm Rsdpfx Aov Awlkodaon Maximum turning length: 1580 mm Spindle speed: 20 - 2000 rpm Chuck size: 15"/18" Spindle nose: A2-11 Spindle bore: Ø 130 mm Dimensions (LxWxH): mm Machine weight: 11,000 kg

Condition: excellent (used), - Digital 3-axis position display. - Accessories included. Rsdpfx Aow U Ac Nsdaen Working Range Centre distance: 1000 mm Centre height: 200 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Distance from top slide to turning centre: 40 mm Bed width: 260 mm Longitudinal slide travel: 900 mm Cross slide travel: 220 mm Top slide travel: 110 mm Bed carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Spindle Spindle nose according to DIN 55 029 (Camlock): 5" Spindle bore: Ø 50 mm Internal taper according to 7178: 1:22 Max. faceplate diameter: Ø 260 mm Max. chuck diameter: Ø 200 mm Spindle speeds: 40 – 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Drive Motor Three-phase AC motor with integrated brake Infinitely variable speed (frequency inverter) Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Tailstock Quill diameter: Ø 50 mm Quill stroke: 120 mm Quill internal taper: MT 3 Machine Dimensions Overall length: 1950 mm Overall height: 1635 mm Overall width: 1060 mm Spindle height above floor: 1133 mm Total machine weight: 865 kg

Condition: used, Tip height 125 mm Tip width 500 mm speed 45 - 3000 rpm feed rate 4 - 260 mm/min spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over cross slide 120 mm top slide travel 100 mm Rjdpfx Asbzlgljdaen cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: good (used), Year of construction: 2007, Control: D.Electron CNC Z 32 Center height 260 mm Center width 1000 mm Rodovw Sf Uopfx Adajn Swing diameter 520 mm Turning diameter over bed 260 mm Spindle passage 110 mm Speed 2000 rpm.

Condition: excellent (used), - Steel holder Multifix "B - Quick release collet device center height 150 mm center width 630 mm spindle bore 40 mm speed (stepless) 55 - 3000 rpm feed rate 0,05 - 0,35 mm/rev inner taper spindle / tailstock MK 5 / MK 3 turning diameter over cross slide 177 mm turning diameter over bed 340 mm power 4.45 kW Rjdpohmkh Tjfx Adajn dimension 1730 x 970 x 1300 mm Weight 1250 kg

Condition: excellent (used), - Digital display. - Accessories available. Working range Center height 520 mm Center width with closed bed 2000 mm Center width with open bed 3200 mm Width of cranking with open extended bed 1200 mm Turning diameter above the cross slide 710 mm Turning diameter above the bed 1040 mm Turning diameter in the crank 1780 mm Headstock spindle bore 132 mm diameter of the spindle in the front bearing 240 mm spindle nose D1-11" Camlock Torque 1100 Kgm Bed and bed slide bed width ("Meehanite" cast iron) 600 mm Length of bed slide guides 900 mm Width of the cross slide 420 mm length of the cross slide 1050 mm Travel of the cross slide 770 mm width of the rotatable top slide 270 mm Length of the rotatable top slide 650 mm Travel of the rotatable top slide 400 mm Tailstock Diameter of the quill - with driver 130 mm quill taper 6 CM/MK Quill adjustment 300 mm Miscellaneous Max. Weight capacity at the faceplate with center of gravity at 200 mm 2500 kg Max. weight absorption between centers 4500 kg Passage of fixed steady rest 200 - 500 mm Coolant pump (75 l/min) 0.2/0.15 HP/kW Rjdpfeikfbdjx Adajn total length 4500 mm with upper bed extension 5700 mm height 1550 mm weight 9,1 t

Condition: excellent (used), Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Rjdpfx Aetzxh Todaon Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: new, Peak height above bed 210 mm Center distance 950 mm Permissible diameter over bed 420 mm Permissible diameter over saddle 160 mm Rjdpfxjwqnm Tj Adaen Headstock Spindle bore 62 mm Spindle nose ASA 6ʺ Type 2 Motor Power 10.7 kW Spindle bore 62 mm Speed 0 – 3500 rpm Standard accessories - CNC control D. Electron Z32 (Lathe) with liquid crystal display and graphics mounted on swing arm, as well as built-in industrial PC Pentium and floppy disk drive. - Zero-backlash ball screw - Programming system ISO, Dialog, Teach-in - Memory capacity 127 MB - Enclosure as per picture with lamp - Sliding safety door - Mobile chip tray - Electronic handwheels with 3 steps 0.001 / 0.01 / 0.1 mm - Main motor power 10.7 kW - Rapid traverse 25 m/min - Constant cutting speed - Quill socket MK 5 - Quill Ø 80 mm - Automatic coolant system - Automatic central lubrication system - Fixed steady rest with rollers - Traveling steady rest - Chuck flange - Fixed center - Reduction sleeve - Operation and programming manual - Standard speeds 0-3500 rpm

Condition: excellent (used), Year of construction: 2002, CNC Control: Heidenhain Manualplus 4110 - Accessories included. Rodpfx Adexal I Doajn - 8-station tool turret. Working Area Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Chuck diameter: 200 mm Cross travel: 185 mm Distance between centers: 750 mm Turning Spindle Spindle nose: DIN 55027 Size 6 Spindle bore diameter: 50.8 mm Spindle taper: MT 6 Spindle diameter at front bearing: 85 mm Main Drive (AC) Drive power (100% duty cycle): 9.0 kW Max. torque (100% duty cycle): 410 Nm Speed range: 10 – 4000 rpm Number of gear steps: 2 Speeds: infinitely variable Feed Drive (AC) X-axis feed force (100% duty cycle): 3000 N Z-axis feed force (100% duty cycle): 6000 N X-axis rapid traverse/feed rate: 8 m/min Z-axis rapid traverse/feed rate: 10 m/min Tailstock Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: MT 5 Machine Dimensions Length: 2450 mm Width: 1668 mm Height: 1825 mm Weight: 2000 kg

Condition: excellent (used), Control : D.Electron Z 32 Redped Sitkofx Adasn centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4