Used Production Printer for sale (19,511)

Condition: used, functionality: fully functional, machine/vehicle number: Serien Nr. 6615N236, Year of construction: 2015, operating hours: 4,500 h, total height: 1,818 mm, type of input current: three-phase, overall weight: 2,200 kg, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, laser power: 400 W, electrical fuse: 32 A, space requirement length: 2,542 mm, space requirement height: 2,000 mm, We are offering this used Conceptlaser M2 cusing 3D printer, manufactured in 2015, for sale. Type: M2 cusing Serial number: 6615N236 Cjdpfx Ais Ah Imboisri Year of manufacture: 2015 Power supply: 3P/N/PE AC 400 V ± 10 %, 50/60 Hz Maximum current draw: 17 A/phase Compressed air: 7–8 bar Inert gas: 5 bar If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: DB023401A, total length: 4,800 mm, total width: 1,345 mm, total height: 1,800 mm, type of input current: three-phase, input voltage: 400 V, working width: 300 mm, power: 6 kW (8.16 HP), control cabinet height: 2,200 mm, The Cefla All-in-One Wood Finishing Machine is an integrated solution for applying, distributing, and impregnating coatings on wooden floors. The machine combines a double roller applicator with two polishing brushes in a single, compact frame. The roller station can be used as a single applicator roller or in reverse configuration when the second station is activated. The polishing brushes are individually adjustable in terms of angle and speed, allowing the finishing process to be precisely tailored to the desired end result. This machine is ideally suited for finishing wooden floors and other flat wooden products, combining the application of oil or varnish and polishing in a single, compact production line. Cjdpj Ahpldjfx Aiijri The machine is suitable for processing oxidative oils and can also be used for suitable UV- and LED-curing oils when combined with additional UV or LED drying equipment. Operation is via a central control panel, which ensures clear and efficient control of multiple finishing steps from a single machine. This specific Cefla All-in-One Wood Finishing Machine is offered as a used machine. The machine has been technically inspected in our workshop and is supplied with used brushes and rollers.

Condition: good (used), Schmedt hardcover book production line The machines are in very good condition and have seen little use. Crodpfjz S Uziox Aiiei The set consists of the following machines: – Schmedt PraLeg book block casing-in machine – Schmedt PraForm Pro book press and joint-forming machine – Schmedt SC-3 Autocase cover assembly table – Schmedt PraziCoat Pro gluing machine (coater) – Schmedt BT-1 Board Trimmer (automatic board cutter) Includes documentation, spare parts, and glue.

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: R1.2.0022, The Kumovis R1 (now marketed as the EXT 220 MED by 3D Systems) is a high-performance industrial 3D printer specifically designed for the medical sector and the additive manufacturing of implants. Key features: • Technology: Fused Layer Modeling (FLM) / Fused Filament Fabrication. • Sterile environment: It is the only extrusion platform that integrates a clean/sterile environment with thermal control and laminar airflow to prevent any contamination during printing. • Compatible materials: Designed to process high-performance and biocompatible polymers such as: • PEEK and PEKK • PPSU (Radel®) • PEI, PLLA, PLGA, PCL, PDO • Filled variants (carbon fibers, tricalcium phosphate/BCP). • Medical applications: Manufacturing of customized medical devices and small batches directly in the hospital or at the point of care: Cjds Ah E D Rspfx Aiisri • Cranio-maxillofacial implants • Bone plates and trauma plates • Spinal cages • Suture anchors and surgical instruments Evolution: • Originally developed by the German start-up Kumovis (founded in Munich), the technology was integrated into 3D Systems' portfolio and renamed EXT 220 MED.

Year of construction: 2006, condition: used, We are selling a PVC production line consisting of the following equipment: ROTOX: ZGS314 - double-head miter saw AS1960 - automatic reinforcement screwing machine FWS381 - automatic three-spindle water slot/drain slot milling machine Credpfx Aisz Hw Erjioi SAF166 - automatic/pneumatic end milling machine KF349 - four-spindle copy router SZK502 - double-head welding machine EPA470 - corner cleaning machine FMS643 - sash assembly station SEK701 - single-head automatic welding machine LA396 - electronic length stop system GLA403 - glazing bead saw, simultaneous cutting of two PVC window frame glazing beads at a exact 45-degree angle BLACKSEA TS3067 - triple-spindle water slot (drainage) milling machine

Condition: used, functionality: fully functional, machine/vehicle number: 3-1-01699-02-37 (5LM37), Year of construction: 2015, operating hours: 46,537 h, type of input current: three-phase, input voltage: 400 V, input current: 16 A, laser power: 10,000 W, feed length X-axis: 275 mm, feed length Y-axis: 275 mm, feed length Z-axis: 420 mm, power: 10 kW (13.60 HP), We are offering a used 3D Systems ProX 350 3D printer, manufactured in 2015. Type: ProX 350 Manufacturer: 3D Systems Year of manufacture: 2015 DMLS (Laser Beam PBF) - Powder 3D Printing Technology. Codpfo Ahyw Tox Aiijri Materials: Metal (used Titanium) - Ceramic Electrical supply: 3 × 400 V AC + N + PE Frequency: 50–60 Hz Rated current: 16 A Power: 10 kW Rated short-circuit current: 6 kA Serial number: 3-1-01699-02-37 Compliance: 21 CFR 1040.10 and 1040.11 Machine sold complete with the following components: -Powder feeding unit -External filter -Vacuum pump -Blower -Recycling unit -Chiller If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Mill with Air Classifier: The Ultimate Powder Processing Equipment In the world of industrial powder production, precision, efficiency, and flexibility are paramount. Whether producing ultra-fine powders for high-tech applications or coarser materials for everyday products, the combination of a Ball Mill with Air Classifier offers unparalleled performance. This dynamic duo provides a comprehensive solution for industries ranging from chemicals and ceramics to paints, plastics, and pharmaceuticals. This article introduces the ball mill with an air classifier, explores its applications, and highlights the key advantages of this essential powder equipment. General Introduction to Ball Mill with Air Classifier ball mill with air classifier is an advanced grinding and classification system designed for efficient, high-quality powder production. The system consists of two main components: 1. Ball Mill: A cylindrical grinding device filled with grinding media (such as steel balls) that operates by rotating around its axis. The raw material is reduced to smaller particle sizes through impact and friction within the mill. 2. Air Classifier: A sophisticated device that separates particles based on size using airflow. Fine particles are carried away, while coarser particles are returned to the ball mill for further grinding. The combination of these two components creates a closed-loop system that ensures consistent particle size distribution, high efficiency, and minimal waste. Applications of Ball Mill with Air Classifier The ball mill with air classifier is a versatile solution used in a wide range of industries to process various materials. Key applications include: 1. Mineral Processing The system is widely used in the production of minerals such as calcium carbonate, quartz, feldspar, and talc. These finely ground minerals are essential for industries like ceramics, paints, plastics, and rubber. 2. Cement and Construction Materials Cement and other construction materials require precise particle size control for optimal performance. The ball mill with air classifier ensures uniformity and enhances the quality of construction materials. 3. Chemicals and Pharmaceuticals Fine powders play a critical role in the chemical and pharmaceutical industries. From active pharmaceutical ingredients (APIs) to industrial chemicals, this system delivers the consistent quality required for these applications. 4. Paints, Coatings, and Pigments The production of paints and coatings demands ultra-fine powders to achieve smooth finishes and vibrant colors. The ball mill with air classifier produces high-quality powders for superior results. #### 5. Food and Agriculture Food-grade powders such as additives, preservatives, and agricultural products like fertilizers can be efficiently processed using this system, meeting stringent regulatory requirements. Industries That Benefit from Ball Mill with Air Classifier Several industries rely on the capabilities of this system to produce fine powders with specific characteristics: - Ceramics: Produces high-purity powders for tiles, insulators, and advanced ceramics. Credpfx Aijvlwkxsiei - Rubber and Plastics: Creates fillers and additives for improved durability and performance. - Pharmaceuticals: Ensures consistent particle size for APIs and excipients. -Construction: Delivers materials for concrete, plaster, and other applications.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server EX-P6 Includes paper decks A-CF03 + A-CF04 Includes stacker Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 14,303,610 pages Colour: Approx. 14,006,634 pages Black: Approx. 296,976 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Crsdpfx Aijzap Sbeiei Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: repair required (used), For sale at a favorable price: Please send us your price offers. Mattress production line for overhaul or dismantling. Manufacturer: KSM, approximately 25-30 years old. The system is aging and requires a thorough overhaul; otherwise, it is functional. It has only been used infrequently by us. However, it is also interesting as a source of spare parts for dismantling. Control system with Lenze frequency inverters, Siemens PLC, conveyor belts, many motors, sensors, metal, aluminum profiles, needle grippers, etc. Consisting of: Gantry: Plate feeder with needle gripper (for automatically placing individual foam plates onto an alignment station with a conveyor belt). Crodpfs Aba Ncex Aiiei Roller adhesive application system (here, the foam plates are passed through on the conveyor belt and adhesive is applied by rollers). Padding carrier feeder with needle gripper (for automatically placing padding carriers (felt) onto the foam plates that have been wetted with adhesive). Adhesive tunnel with adjustable nozzles (here, the pre-assembled plates are sprayed with adhesive on the conveyor belt to allow the frame to be glued). After that, the material can be removed from the conveyor belt to assemble the mattresses. Several hundred mattresses per shift are possible. The system will only be sold as a whole. Dismantling and transport must be handled by the buyer. (EXW)

Condition: excellent (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, total length: 40,000 mm, total width: 4,000 mm, total height: 4,500 mm, working height: 2,500 mm, input voltage: 400 V, overall weight: 48,000 kg, type of input current: three-phase, Equipment: documentation/manual, Complete line for the production of single and double-pane insulated glass units, including: Automatic bending machine for frames FB-H PC system Automatic spacer filling machine DF-R-V Automatic insulated glass production line IGL-G-H2 (with automatic argon filling at a minimum level of 90%) Automatic sealing robot (two components) ASR-H2.5 Cedez Ihhtopfx Aiisri Butyl applicator BE-A Rotating table RT-A Frame transporter Technical data: 1) Power supply: AC380V, 50Hz, approximately 45KW 2) Air pressure: 0.6~0.7MPa 3) Dimensions: 33250(L)×3000(W)×3000(H)mm 4) Max. load: insulated glass unit approximately 850kg, suction side approximately 400kg 5) Min. glass size: 450×350mm 6) Max. glass size: 5000×2500mm 7) Insulated glass unit thickness: 14~70mm 8) Working height: 530±30mm 9) Transporter speed: 35m/min 10) Inclination angle: 6°~8° 11) Glass thickness: 4-15mm 12) Bristle diameter: 0.12mm 13) Max. washing speed: 0-10m/min adjustable 14) Average expected output: 1 m2 (1000x1000mm) of rectangular insulated glass units with the configuration (6mm+9A+6mm), for example, approximately 550 units per 8 hours with automatic gas filling, approximately 650 units per 8 hours without gas, for single-pane units (depending on the current factory situation and employee efficiency).

Condition: used, functionality: fully functional, Year of construction: 2018, Printer was used at research centre but last 5 year after the printer was repaired , there was changed printing head in 2021 and since there the printer was not used much Csdpe Ah E Nrsfx Aiieri

Condition: used, Year of construction: 2018, functionality: fully functional,  Dough Divider • Stainless steel dough hopper, flour hopper, and cutting blade. • Conveyor belts • Single discharge head and a special constricting helical axle to prevent air gap formation in the dough balls. • Precise control of dough-ball size (60-180 gr) using photo sensors. • Control via fingertip, using a potentiometer to adjust the production rate (500-1000 cuts per hour). Electro/pneumatic cutting (4.5 bars). • 3-phase variable speed motor (2 Hp/1.5 Kw) monitored by a variable frequency drive (inverter system). • Pneumatic parts – Spiral extruding system • All electrical parts are of European origin; inverters are used to control the speed.  Primary Proofer for dough balls • Fermentation layers with conveyor belts equipped with centering guides to keep the belts on track. • Transparent plexiglass, sliding side walls to facilitate cleaning and maintain the ideal dough temperature. • Flour collection drawers. • Control via fingertip, using a potentiometer to adjust the fermentation time (3-15 min) from the dough divider’s control panel. • 3-phase variable speed motor (1 Hp/0.75 Kw) monitored by a variable frequency drive (inverter system). • Inverters are used to control the speed.  Dough Flattener – Single Output • Control via fingertip, using a potentiometer to adjust the production rate (500-1000 loaves per hour, with a diameter ranging from 15-38 cm). • 3-phase variable speed motor (0.5 HP/0.32 Kw) to control the first phase of the flattening process. • Another variable speed motor (2 Hp/1.5 Kw) monitored by a variable frequency drive (inverter system) to drive the second part of the dough flattener located at the final proofer. Tobmdhs Ahf Diea S Ted • Stainless steel dough hoppers and flour collection drawers. • Special food-grade quality felt and PVC conveyor belts. • Double-stage flattening with a special thickness regulator for the flattened dough. • Electro/pneumatic stage shift from oval to circular shape. • Inverters are used to control the speed.  Final Proofer – Layers System • Fermentation layers (width of 40 cm) equipped with centering guides to keep the belts on track. • Transparent plexiglass, sliding side walls to facilitate the cleaning process and maintain the ideal dough temperature. • Control via fingertip, using a potentiometer to adjust the fermentation time (5-20 min) from the dough flattener’s control panel. • Conveyor belts are driven by the 3-phase motor (2 Hp/1.5 Kw). • Inverters are used to control the speed. Cjdj Ahf Dispfx Aiieri  Tunnel Oven for bread 40 cm plates • Low-emission combustion process and relatively low fuel consumption. Heat-resistant steel conveyor plates (thickness of 5 mm) of food-grade quality. The oven frame is steel for insulation. • Suitable thermal distribution and safe insulating layers (3 different layers of bricks, cement, and fiber ceramic). • Control via fingertip, using a potentiometer to adjust the production rate (500-1000 loaves per hour, with a diameter ranging from 15-38 cm). • 3-phase variable speed motor (2 Hp/1.5 Kw) monitored by a variable frequency drive (inverter system). • Equipped with an insulating cover and an emergency stop button to protect workers on or near the machine. • Low polluting emissions. • Gas burner included. General Specifications: • Dough Weight: 60 to 180 gr, Bread diameter: 15 to 38 cm • Production Capacity +/- 500 to 1000 loaf/hour with a diameter of 15 - 38 cm

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 90119NTT 182902, overall weight: 20,000 kg, number of previous owners: 1, AUTOMATIC TANDEM PALLET PRODUCTION LINE: STORTI GSI 170-270 TA9 Industrial tandem hydraulic pallet nailing line by Storti S.p.A. (Italy). Model: Storti GSI 170-270 TA9. Year of manufacture: 2024. The equipment is in as-new condition with minimal running hours. Engineered for high-volume production of standard Euro pallets (EPAL / EUR) and customized wooden pallets. Technical Specifications & Components (Total Weight: Approx. 20,000 kg): * Storti GSI 170 TA9 (4,500 kg) – primary nailing machine (bottom part/skids assembly). * Storti GSI 270 TA9 (4,000 kg) – secondary nailing machine (top deck boards nailing). * Storti GSP 170 (1,150 kg) – automatic block & board feeder. * Storti GSM 3/6 (3,000 kg) – pallet chamfering & corner cutting unit. * Storti GA 90/180 (1,000 kg) – pallet turning / rotating device (90°/180°). * Storti AGS/237 (1,860 kg) – automatic hydraulic stacking system. * Storti C/5 (1,000 kg) – outfeed / transport chain conveyor. * Storti DAT 2008 (1,100 + 600 kg) – pallet branding / marking unit. * Control System: Main electrical display console Q1 + auxiliary control panels (Q2, Q3, Q4). * Safety: Complete set of original protective barriers and industrial heavy-duty cable ducts. * Serial number: 90119NTT 182902. Terms: * Location: Harghita, Romania. * Delivery: EXW / FCA. Crjdpfx Aiez Hk Ndeiei

Condition: used, Year of construction: 2005, functionality: fully functional, The machines are in working condition and are still in daily use. Under Pressure in Bulgaria. STURTZ SE-HSM Compact + JC243 + SE-4AS-CNC Welding/Cleaning Production Line German-engineered CNC cleaning and welding production line for PVC windows. Suitable for medium to large production environments and compatible with all PVC window profiles. Depending on the product mix, up to 120 windows with one element per welding cycle can be welded in a diagonal or parallel joining process within an 8-hour shift. PC-based control technology with LCD process-reliable display of production and machine data, featuring easy-to-operate intuitive menu navigation and a visual representation of machining processes on the touchscreen display. STURTZ SE-HSM Compact Multi-Point (4-Head) Horizontal Welding Machine CNC simultaneous high-temperature welding of four corners at a 90° angle with parallel welding feed. With electronic positioning of welding heads, PC control, weld seam limitation of 2mm, and automatic outfeed. Specifications: • Max. frame or sash size: 4000 x 2600 mm • Min. frame or sash size: 320 x 320 mm • Working direction: Right to Left • Line capacity: Standard 120 units / 8-hour shift. 1 unit = 1 frame + 1 sash • Min. profile depth: 45 mm • Max. profile depth: 120 mm • Min. profile sight line: 25 mm • Max. profile sight line: 130 mm Features: Quick change of the fixtures through a screwless back stop system ensures a flexible production process. Clamping cylinders adjust automatically to the required profile height. Automatic adaptation of fusing time to the different profile cross-section. Compensation welding system allows welding of profile bars with a cutting tolerance. Credpfx Aio Agfwbeiji Central control panel, electronic positioning. Dimensions: 5500 x 5000 x 2000 mm Weight: 4500 kg STURTZ Transport / Cooling Table The powered automatic table transports the elements from welding to cleaning positions, during which time the welds are allowed to "cool". STURTZ SE-4AS- 4-Axis CNC Corner Cleaner CNC corner cleaning machine with (4) interpolating axes for complete machining of corners of uPVC window frames. Fully automatic cleaning of visible surfaces, outer corners, seal grooves, and inner corners on uPVC window frames and sashes. Specifications: Features: The SE-4AS has a 4-axis freely programmable LCD control unit. Equipped with: Top and bottom horizontal and vertical scarfing knives; top and bottom vertical router, frequency-controlled cutter disc for outside contour cleaning. 4-Axis CNC upper and lower tool units, profile recognition system. Due to the pressure in Bulgaria, the machines can be dismantled and removed immediately.

Condition: used, Labeling machine for top and bottom, with a ZODIAC printer for the top labels. More photos and full specifications: / Codpfsyaqttjx Aiieri

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm Cedszqz Hwspfx Aiijri * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, machine/vehicle number: 12904540S1, working range: 1,500 mm, type of input current: three-phase, input current: 25 A, working width: 1,500 mm, power: 15 kW (20.39 HP), Storti GS/150-AL palletizing machine including pallet stacker | Year of manufacture 2004 For sale: a Storti palletizing machine, type GS/150-AL, manufactured in 2004, including a pallet stacker. The machine comes from a production environment and has a robust design. Minor repairs or maintenance work are required; therefore, it is preferably sold to specialized companies or technically skilled individuals. The machine is to be dismantled and collected by the buyer, and is sold without warranty or guarantee. Cjdpfx Aj Agvbmsiiori

Condition: used, Year of construction: 2022, functionality: fully functional, Complete set of equipment for foam production and converting – HYMA and supplementary equipment Offer description For sale is a comprehensive set of machines and equipment for the production, processing, and converting of foams, including equipment for foaming, granulation, storage, sheeting, processing of cylindrical blocks, and precision cutting. The offer includes machines from renowned manufacturers, including HYMA, as well as auxiliary and installation equipment. The set allows for the implementation of many stages of the technological process – from foaming and material processing to its treatment and cutting. Most of the equipment dates from 2021–2022. The offer also includes an unused steam generator and an unused prepolymer tank. 1. Equipment for production and material preparation 1.1 HYMA BFH-15 foaming line (2021) Three foaming stations: - two stations for rectangular blocks with dimensions 2080 × 1080 mm and 2080 × 1580 mm, - one station for cylindrical blocks with a diameter of 1400 mm and a maximum height of 2100 mm. Two-screw mixer with a volume of 15 m³. Maximum foam density: 300 kg/m³. 1.2 HYMA GMK-80 granulator (2021) Main motor power: 55 kW. Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 1000 kg/h with a 25 mm screen. Conveyor fan: 15 kW. Loading belt conveyor: 1 kW. 1.3 HYMA GMP-75 granulator (2021): Motor power: 75 HP (approx. 55 kW). Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 500 kg/h. 1.4 HYMA GFH-330/7 silo (2021) Capacity: 45 m³. Height: 5300 mm. Diameter: 3300 mm. 2. Equipment for sheeting and processing of foam blocks 2.1 HYMA SSB precision sheeting machine for single blocks (2021) Maximum sheeting height: 105 cm. Maximum foam density: 250 kg/m³. HYMA SCH-700 carousel sheeting machine (2021) 2.2 Carousel structure for sheeting foam blocks. Table diameter: 7000 mm. 2.3 HYMA RH drilling machine for cylindrical blocks (2021) Equipment for drilling cylindrical foam blocks. 2.4 HYMA RSS-220 machine for trimming cylindrical blocks (2021) Equipment for trimming and processing cylindrical foam blocks. 3. PTV WJ2116-1Z-Dynamite CNC waterjet cutter (2022) Cutting with a pure water jet, without the addition of abrasive material. Cjdpfxj Agwbas Aiisri "Dry" work tank. Interchangeable tables. Working area: 2100 × 1600 mm. 4. Auxiliary and installation equipment 4.1 CERTUSS Universal 850 TC steam generator (2022) Nominal steam output: approx. 850 kg/h. Thermal power: approx. 558 kW. Includes a water treatment station. Status: unused. 4.2 Prepolymer tank (2022) Nominal capacity: 20 m³. Status: unused. Summary The offer includes 11 items of equipment and production equipment, intended for use in a plant that manufactures and processes foams. The set may be of interest to manufacturers planning to expand existing production capacity, start a new plant, or acquire equipment for subsequent stages of the technological process. Year of equipment production: 2021–2022. Sale: preferably as a complete equipment package. The possibility of purchasing individual equipment requires agreement with the seller. Detailed information regarding the technical condition, availability, location, and terms of sale will be provided to interested buyers.

Condition: used, Year of construction: 2013, Technical specifications: Cedo Af Nl Rspfx Aiiori Build volume/build size max: 1,000 × 800 × 500 mm, layer thickness up to 27 microns, high speed: up to 3 base resins, 27 µm resolution, super-high speed: 1 base resin, 55 µm resolution, PolyJet UV technology, 110-240 V, dimensions: 2,870 x 1,960 x 2,105 mm, weight: 2,200 kg; NOTE: The printer was fully overhauled by STRATASYS in 2025, and an upgrade costing approximately €135,000.00 net was installed; additionally, it comes with accessories such as an exchangeable print plate with a mobile lifting frame, various spare parts, and various printing materials. Fully functional condition. The machine is already located at another site at Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt.

Condition: used, The Rondo pizza system is an industrial production line for processing pizza dough, from dough sheet forming and calibrating to pressing and preparing for topping. The line consists of a 4-row WP head machine, Type TWS (year of construction 2015), and a Rondo dough sheet former, Type Laminazione (year of construction 2001), with a dough sheet width of 600 mm and a capacity of 1,800 kg/h. Further components include a hopper with a star roller divider, flour dusters, belt conveyors, a cross roller, calibrating roller sets, punching and spike rollers, a guillotine, and leftover dough return systems. The system features belt proofing units and feeding systems for the dough pieces and the pizza press. The heated pizza press achieves a capacity of 4,128 pieces per hour and is designed for pizza sizes of 250, 280, and 340 mm. Additional equipment includes a vacuum suction depanning device, a spike press, oven outlet and curve belts, and conveyors for the topping line. A herb spreader and a water-moistening unit complete the system. Pizza System Rondo – Components and Equipment WP head machine, Type TWS, 4 rows, year of construction 2015 Rondo dough sheet former, Type Laminazione, year of construction 2001 Dough sheet width: 600 mm Capacity of dough sheet former: 1,800 kg/h Hopper with star roller divider Flour duster Belt conveyor system Cross roller Calibration rollers 1 and 2 Additional flour duster Csdpfs Ahn E Usx Aiijri Retracting belt for leftover dough Ascending conveyor to belt proofer, belt width 1,000 mm Belt proofer, belt width 1,000 mm Internal dimensions of belt proofer (L × W × H): 14,300 × 3,000 × 2,394 mm Conveyor to topping line 1 Additional flour duster Cutting roller Spike roller Guillotine Automatic retracting belt for leftover dough Metal conveyor belt with tank Setting device from 750 mm to 1,600 mm Dough piece feeding system Dough piece proofer Feeding system to pizza press Heated pizza press Pizza press capacity: 4,128 pcs/h Pizza sizes: 250, 280 and 340 mm Vacuum suction depanner after pizza press Spike press Oven outlet belt with setting device Curve belts, 750 mm Topping line conveyors (without waterfall spreader) Herb spreader and water-moistening unit

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Hersteller: A·S·T·A Eismann GmbH Food Technology • Typ: DLP • Baujahr: 2017, Manufacturer: A·S·T·A Eismann GmbH Food Technology • Type: DLP • Year of manufacture: 2017 • Machine number: 903758 • Throughput: up to approx. 2,000 l/h • Siemens S7 with touchscreen • Heat recovery and product pump • Feed tank: 100 l • Double jacket: 30 l • Operating pressure tank/double jacket: max. 6/3 bar • Temperature tank/double jacket: max. 90/100 °C • Stainless steel design, CE marking HOMOGENIZER: • Manufacturer: Bertoli S.r.l. • Type: H3007 Codpfx Aij Adrqqsijri • Year of manufacture: 2001 • Serial number: 1784 • Capacity: up to approx. 1,200 l/h • 7.5 kW, 380 V, 50 Hz, 15.4 A • Maximum working pressure: 18 MPa or 180 bar

Year of construction: 2023, condition: excellent (used), Mobile unit for the production of soft cheese. Crsdpfx Aijzy D Euoiji

Condition: excellent (used), 4000 pcs production boards Mywood 1400x1150x50 - out of production March 2026 - price: 15 euro pcs Codpoyftzdofx Aiiori

Condition: used, functionality: fully functional, operating hours: 33,105 h, Year of construction: 2015, laser hours: 6,024 h, laser power: 15,000 W, We offer a used PHENIX SYSTEMS Prox 300 (DMP) system, manufactured in 2015. Manufacturer: PHENIX SYSTEMS Model: Prox300, Type: 5006073Z00 DMLS Technology: Direct Metal Laser Sintering. Materials: Metal, Ceramic (used on Inconel). Year of Manufacture: 2015 Crjdj Ahzbpopfx Aiisi Serial Number: 1584305 Type: 5006073Z00 Power: 15 kW Voltage: 400 / 480 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: welding and deburring line with a rotating table for PVC windows. The line consists of: - Welding machine - HOLLINGER MSP, year 2005 - Transport and cooling table - HOLLINGER SVS, year 2005 - Automatic cleaning machine with welded frame rotation - ROTOX EPA 472, year 2005. The production line was used only in Germany and is in very good condition, having been regularly serviced. Codpfx Aez A R I Esiiori Negotiable price: 22,000 euros + VAT.