Used Prism for sale (279)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm workpiece weight 400 kg table longitudinal travel 650 mm table speeds 2 - 28 m/min table cross travel 400 mm speed 100 - 1000 mm/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7 kW peripheral speed 10 - 32 m/sec total power requirement 11 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,95 x 2,65 x 2,47 m Additional information CNC Precision Surface Grinding Machine Table drive: hydraulic Cross-axis drive: electromechanical Electromagnetic plate: 600 x 400 mm with holding force control and automatic Hedpjzzw Rtjfx Aitjnu magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar Machine light Without grinding wheels and flanges.

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports Hjdpfx Aexaabfsitonu - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: refurbished (used), Used 3D CNC coordinate measuring machine. ZEISS Eclipse 7.7.5 – fully modernized in 2026 with a new UCC-S3 controller, PH10M rotary-swivel system, joystick box, SP25 scanning probe, and a PC with RationaDMIS 3D software. Further details available upon request Measuring range X = 700 mm - Y = 700 mm - Z = 500 mm Hodey Nzr Tspfx Aitsnu Price: upon request ᐳᐳᐳ One-of-a-kind item - while available ᐸᐸᐸ Request our detailed quote. Of course, we provide all services such as installation, maintenance, service, training, programming, etc.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 VAST GOLD Year of Manufacture: 2000 Retrofit 2024, Last DAkkS Calibration 12/2021 Measuring Range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: Hnedpfx Ajzq U Rcsitou C99 control system with BP26 control panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine MSR 10-position VAST Probe changer turret 8x VAST Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software Options: QS-Stat Calypso upgrade and further options available Additional accessories and options available Available for immediate delivery.

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal Hnodpfoxabzyox Aiteu circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6114676, Country of manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 180 kg Dimensions: 850/620/1600 mm Installed power: 0.7 kVA Customs tariff code: 8460.3930 TECHNICAL CHARACTERISTICS DOUBLE CUP PRE-GRINDING AND SUPER-FINISHING WHEEL (FOR HARD METAL) - Abrasive: diamond - Diameter: 175 mm - Bore: 20 mm Spindle speed: 2500 rpm Cutting speed: 23 m/sec Spindle bearing: precision plain bearing Hnedpfow T S Tbsx Aitsu Micrometric infeed of the workpiece by means of a fine-pitch threaded spindle, division: 0.01 mm Adjustment of approach and clearance angle: max 26° TOOL HOLDER CLAMPING CAPACITY: - Prism-shaped tool bodies: max 40x40 mm - Cylindrical tool bodies: max 16 mm - Circular cutting tools: max 85 mm MOTOR POWER: - Drive motor: 0.55 kVA - Pump motor: 0.1 kVA Coolant tank capacity: 10 l. All technical specifications are provided without obligation and subject to error or omission.

Year of construction: 2004, condition: good (used), TR 800 LIGNUMA circular sawmill - for prisms - user manual – feed on the inverter TECHNICAL PARAMETERS: horizontal clearance 480 mm vertical clearance 300 mm min. length of the processed material 1300 mm cutting width 65 - 340 mm height of sawn material 10 - 280 mm the ability to work on 2 and 4 discs type of saw Ø 800 mm power of the main drive motor 37 kW power of the feed drive motor 1.1 kW length of the feeding table 3200 mm receiving table length 2500 mm total length of the machine 7200 mm machine width 1000mm machine height 1060 mm weight 1850 kg Hjdoktg Shepfx Aitenu The main advantages of the machine: – stable structure – produced by the Polish reputable brand LIGNUMA – a leader among sawmill manufacturers - recommendable – for every professional

Condition: used, Year of construction: 1971, pressure capacity max. 80 t Stroke 500 mm table surface area 960 x 810 mm spindle pitch 72 daylight between the columns 950 / 540 mm passage 640 mm machine weight ab. 4500 kg dimensions of the machine ca. 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves Hnjdpfx Aiovxwzkotou different support frames

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Hodpsx Ecg Ujfx Aitenu Pneumatic material clamps coolant lubrication

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Hodpot Hw D Dsfx Aitjnu Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Hsdpfx Ajmck Ryeitsnu Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 200/90/H170 mm -Weight: 8,8 kg Hsdpfjv Adi Asx Aitjnu

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm Hnsdpfxet Hllpe Aitju distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length

Condition: good (used), Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg Hodpfxob Uhn Ne Aitenu

Condition: used, functionality: fully functional, mileage: 629,000 km, first registration: 10/2011, fuel type: diesel, empty load weight: 11,700 kg, maximum load weight: 26,000 kg, tire condition: 70 %, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 8,310 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, differential lock, fog lights, power mirror, trailer coupling, truck registration, Mercedes Benz Actros 2541 Roll-off tipper PRISMAG SA26L 6x2 Front leaf suspension - rear air suspension Differential lock Automatic transmission GVW 26,000 kg – payload 14,300 kg Trailer coupling (permissible gross combination weight 44,000 kg) Euro 5 Total vehicle length: 8.31 m Wheelbase: 4.20 m Hnsdpfx Aeyfg Rrsitsu ABS 3rd axle steerable and height-adjustable Tyres 70% 500L tank Fog lights Sun visor Central locking Air conditioning Air-suspended driver’s seat Electric windows and exterior mirrors All information provided without guarantee / errors and omissions excepted.

Year of construction: 2010, condition: ready for operation (used), number of axes: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Additional equipment • Joystick box • Tailstock • Spring-loaded tailstock • Clamping lugs: 35–37, 39–41, 55–57 • Clamping profile strip with end-face connection • Clamping profile strip without end-face connection Hnodex D D Abspfx Aitju • Connector with connection slots • MAG1 mounting • Spring clip 15° (short) • Spring clip 15° (long) • Threaded clamping holder • 30 mm cylindrical pin • 40/10 mm guide comb with longitudinal groove only • 120° prism with spring clip • The maximum length measurement deviation in the XY plane is 2.5 + 0.006 µm • Measuring range (X/Y/Z): 200 x 250 x 100 mm • Resolution: 0.5 µm (0.0005 mm) • Accuracy XY: (2.5 + 0.006 µm) • Accuracy Z: (5 + 0.006 µm)

Condition: used, Year of construction: 2010, Manufacturer: Richter Lunetten Type: Prism Block 10-3 Year of manufacture: 2010 Min diameter 50 mm Max diameter 400 mm Work load each unit 10 Ton Height adjustment 100 mm Prism angle 120 degrees New price EUR 60,000 Specifications Metric US Standard There are (still) no specifications for this machine. Hsdpfx Ajwrq Szoitonu Dimensions (Estimate) Length 1200 mm Width 800 mm Height 800 mm Weight 800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Condition: reconditioned (used), functionality: fully functional, measuring range X-axis: 12 mm, Mitutoyo roughness measuring machine Surftst SJ201 in good condition with carrying case and roughness standard measuring ranges: Z = 0,3mm (optional stage 550mm) X = 12.5mm Optional: optional stylus from € 800,-- (different types) Vice (used) € 100,-- Mitutoyo Height gage as stage € 200,-- CEJ stage with granite base € 250,-- Mitutoyo Stage 178-039 upgrade € 450,-- Hjdpfxjx N Szrj Aitenu some prisms on demand

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Hnjdpfovmz R Ssx Aitju Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: excellent (used), TETRA PAK APPLICATOR TCA45 CONVERTED TO HELICAP27 1000 PRISMA YOM 2006 FULL COMPLETE Hnodpfeuzv E Rjx Aitju EXCELLENT CONDITION DISMANTLED AND PACKED INTO TETRA BOX VIDEO IN RUNNING CONDITION UNDER REQUEST

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations Hnsdpfx Aox D Nl Isitou • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Condition: used, functionality: fully functional, - Polish production - DTR (Technical Documentation / Operation Manual) - Maximum length of processed material: 2800 mm TECHNICAL PARAMETERS: - Minimum length of cut prism: 600 mm - Maximum thickness of cut prism: 110 mm - Maximum width of input material: 450 mm - Maximum width of finished board: 150 mm - Minimum width of finished board: 70 mm - Saw blade diameter: 400 mm - Output capacity up to: 20 m³ - Power of right vertical spindle motor: 3.5 kW - Power of left vertical spindle motor: 3.5 kW Hjdpsq Rc Rlefx Aitjnu - Rotational speed of vertical saw drive motors: 2850 rpm - Power of horizontal saw motor: 22 kW - Rotational speed of horizontal saw drive motor: 2850 rpm - Rotational speed of feed drive motor: 1450 rpm - Feed speed (stepless adjustment): 0 - 20 m/min - Supply voltage (50 Hz): 3×400 V - Machine dimensions (L/W/H): 7250 / 1700 / 1600 mm - Transport dimensions (L/W/H): 4700 / 2400 / 1600 mm - Machine weight: 1300 kg

Year of construction: 2009, condition: good (used), machine/vehicle number: 133, Offer 18291 Hydraulic horizontal bending and straightening machine Technical data: - Bending force: 100 kN / 10 t - Adjustable bending force: 0 - 100 kN - Stroke: 0 - 150 mm - Working width: approx. 200 mm - Stroke speed: 0 - 0.6 m/min - Tool height: up to approx. 100 mm - Bending capacity: - with MW 100 prism, flat material up to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Straightening capacity Wy at a straightening block distance of 1 m: 100 cm³ - Drive: 400 V / 1.1 kW Hnsdpfog Ewi Nox Aitou - Space requirement: approx. W 1100 x H 1000 x D 650 mm - Weight: approx. 400 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 MASS VAST GOLD - RDS+VAST XXT Year of manufacture: 2004 Retrofit 2024, last calibration 01/2025 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system RDS sensor system with VAST XXT Probe changer magazine MSR 10-position VAST Gold Probe changer magazine 3-position VAST XXT Probe changer plate 8x VAST Gold Probe changer plate 3x VAST XXT Reference probe Temperature probe Hjdjzk Id Aspfx Aitenu Probe accessories Calibration sphere HP Z4 workstation WIN11 with monitor Calypso Basic 2024 software Curve and QS-Stat options Calypso upgrade and other options possible Further accessories and options possible Available for short-term delivery.

Condition: excellent (used), Tuschier Straightedge (28691) 90° Prisms Length: 1000 mm Hnsdpoymmfljfx Aiteu Leg length: 85/120 mm Weight: 29 kg