Used Printing Table for sale (22,084)

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm table height 160 mm T-slots 12 mm Dcodpfx Aisupw T Rsljn weight 45 kg dimensions 0,6 x 0,45 x 0,2 mm Cross table with turntable

Condition: new, number 93 Positionen Dsdpfxeyv I Eas Ailjcn weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, number 102 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Dcjdpfxoyv I Hds Ailon Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 Dcodpfx Aeyv I Hwsilon The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: new, table length 1200 mm table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Workstation Dsdpeyv I Inofx Ailjcn - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm

Condition: new, table length 3000 mm table width 1500 mm Dodpfexwzd Nox Ailscn table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table with accessories - Table size: 3000x1500x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set

Condition: used, Year of construction: 1992, table diameter 600 mm table load 250 Kg swivelling range 0 - 135 Grad turning speeds 0,03 - 2,0 U/min connected load frequency 400 V Dcedeygxzrspfx Ailen weight 0,4 t Dimensions (LxWxH) 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control - 315mm chuck

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Dsdpfxomhm Auj Ailscn Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: used, Martin T 60 panel saw Heavy-duty precision panel saw 3-axis positioning control with 5.7-inch touch screen 3-axis scoring saw Motor: 5.5 kW Saw blade can be tilted from 0 to 46° Motorized saw blade height adjustment Saw blade diameter up to 400 mm Cutting length: 3300 mm Dsdpjz Azxqefx Ailocn Cutting width with parallel guide: 1250 mm Manual adjustment of the parallel guide Parallel guide position can be read on the touch screen Swiveling control panel above the table CE version Machine is WORKSHOP OVERHAULED and in TOP CONDITION Available from stock in Lieboch

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_6, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included Dcedpfjz A U H Esx Ailjn 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Processing diameter: 4,200 mm Table speed: 12.3 min-1 Max. workpiece weight: 9,000 kg X-axis: 1,110 mm Processing height: 850 mm Workpiece height: min. 50 / max. 850 mm Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head Djdpfx Aoz Didnoiljcn In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. As part of this modernization, the entire automation and drive technology was converted to Siemens technology. The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.

Condition: used, -WR 155- We are offering ten workbenches from the manufacturer Promat. These are painted blue and have a large work surface with seven lockable drawers. Discounts are possible when purchasing multiple workbenches. Due to high demand, we can currently only offer workbenches without a vise. Technical data: Overall height: approx. 850 mm Overall length: approx. 700 mm Overall width: approx. 2000 mm Leg height: approx. 230 mm Drawer dimensions: Overall height: approx. 120 mm Overall length: approx. 600 mm Overall width: approx. 500 mm Dcodpfxozv Sf Io Ailjn Large compartment dimensions: Overall height: approx. 500 mm Overall length: approx. 650 mm Overall width: approx. 530 mm

Condition: refurbished (used), - Longitudinal/transverse arrangement with manual and automatic transmission - Accepts Euro pallets in both longitudinal and transverse directions - Load capacity: 1300 kg - Basic dimensions: 1430 mm wide, 1670 mm long, 1854 mm high - Design: mobile - Lifting range: minimum height 80 mm, maximum height 1030 mm, lifting stroke 950 mm - Color: light gray RAL 7035, completely Dodpfx Aeiyyvhoilecn - Power connection: 440 V - 50 Hz, 1.5 or 2.2 kW - Weight: 490 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,860 mm, total width: 1,850 mm, Two-color offset printing press Dcedpfx Ajzwhbbsilen Heidelberg Speedmaster 52-2 Year of manufacture: 1998 Number of impressions: 63 million Equipment: Heidelberg CPTronic Heidelberg suction head with lifting/dragging suction grippers Heidelberg Autoplate with Heidelberg register system Alcolor dampening system Numbering and embossing unit Interface adapter for connecting external devices Largest sheet size: 37 x 52 cm Smallest sheet size: 10.50 x 14.50 cm Max. printing area: 36 x 52 cm Max. printing speed: 15,000 sheets/hour

Condition: new, Year of construction: 2026, functionality: fully functional, 11 kW = 15 hp Cutting height 200 mm Saw blade diameter 550 mm with scoring blades Dcedpfx Aiocyd Ncolen Cutting width to parallel fence 1500 mm Sliding table length 3200 mm Sliding table mounted on hardened steel rollers (similar to Altendorf) The large fence on the sliding table can be swivelled 45° to the left and right; Electric height adjustment Electric tilt adjustment up to 45° Digital display for the tilt angle Machine weight 1250 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, MULLER MARTINI CONCEPT 6 F Web Offset Printing Machine for Label and Form Printing Manufacturer Müller Martini AG, Zofingen, Switzerland Production Year 2003 • number of Colours: 6 • counter: 59 mil. impressions • max print 515 mm • roll width 200 - 520 mm • speed max 300 m / min • unwinder roll diameter max 1270 mm • electromotoric roll lifting • BST EKR web edge regulation double-sided scanning • automatic ink roller washing • printing plate thickness 0.15 - 0.3 mm • plate bending machine • Technotrans Alpha d • alcohol dampening • Schinler printing unit tempering • paper web cooling • IST UV drying • 6 UV lamps • 6 ink mist extraction devices • perforation unit 2303 • roll - roll production • roll - fold • roll - sheet • printable material 50 - 180 fg/m2 • Dcodpfx Aiszl A R Holsn

Condition: excellent (used), Dividing table – rotary table Brand: PDQ Diameter: 635 mm Height: 145 mm Dodpfxexazu He Ailecn Base diameter: 760 mm Indexing: 45° via index or 1° and minutes via scale Weight: 280 kg

Condition: excellent (used), Rotary table Diameter: 300 mm Height: 82 mm Dcsdpfxexz Tu Io Ailsn T-slot width: 10 mm Indexing: 2 degrees per handwheel revolution Width: 400 mm Depth: 450 mm Weight: 38 kg

Condition: used, optical rotary table diameter 450 mm height 160 mm documentation available Dcodpfx Aiedtr I Soljn

Condition: used, Angle table with 5 T-slots 12 mm T-slot width Dodpfx Aocu Im Deilscn Length 680 mm Width 260 mm Height 265 mm

Condition: excellent (used), Year of construction: 2022, ROQ P10 - Installed brand new from ROQ Dec 2022 Only 98'867 prints! Full working order Dsdpfoz E Nbcsx Ailecn 1 x ROQ Flash Set up for 6 colour print Lots of screens, ink, tote pallets etc can be included in a deal

Year of construction: 2022, condition: good (used), Water table for copper separation – capacity approx. 700 kg/h For sale: used water table for copper separation, including from shredded cables. The capacity is approximately 700 kg/h and depends on the type of material being processed. The equipment includes a table, a spraying system, and a control cabinet, as shown in the photos. The current condition is depicted in the photographs. Dcodpfx Aez E Nhisilen Price: 15,000 EUR Location: Rogówko, Kuyavian-Pomeranian Voivodeship Contact: 515 073 538 Feel free to contact us. If you have any questions or require additional information, please send a message or contact us by phone.

Year of construction: 1980, condition: good (used), Underfloor circular saw, cut-off saw, miter saw, panel saw, table saw, circular saw, construction site circular saw -Manufacturer: Hanning, table saw, construction site circular saw -Type: HTK 315/2-Q62 -Motor power: 2.2 kW / 2720 rpm Dsdjz Ayizopfx Ailocn -Voltage: 380 V / Connector pole-changing -Saw blade: max. Ø 315 mm -Cutting height 75 mm -Stop holder: without stop -Dimensions 890/720/H900 mm -Weight: 43 kg

Condition: excellent (used), Year of construction: 2016, (for processing large plates) Equipment / Additional information: Dodpfx Aez Eaa Neilscn The plates are fixed to the table using a vacuum.

Condition: like new (used), functionality: fully functional, spindle diameter: 30 mm, rip fence adjustment: manual, actuation type: electric, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, overall weight: 800 kg, Equipment: CE marking, SCM T130 Undercut Spindle Moulder | 7.5 kW | Robust and reliable SCM T130 undercut spindle moulder – an industrial-grade machine, ideal for joineries, production facilities, and demanding users. Equipment ready for operation – precision, power, and ease of use in one. TECHNICAL SPECIFICATIONS: Motor power: 7.5 kW Control: from the control panel (comfortable operation) Dcjdpfx Asy S Tt Uoilen Spindle adjustment: electric Total spindle height: 200 mm Spindle diameter: 30 mm Spindle speed: 3000 / 4500 / 7000 / 10000 rpm Speed change: via belt Dust extraction: 2x 120 mm nozzles Long tables Certificate: CE Why choose this machine? Strong and stable construction – no vibrations, perfect machining quality Electric spindle adjustment – quick and precise setting changes Wide speed range – suitable for various materials and tools Professional machine for intensive use SCM brand – a proven manufacturer in the woodworking industry Machine dimensions: Length: 260 cm Width: 110 cm Height: 120 cm Weight: 800 kg Where can you see our machines? JBS WOODWORKING MACHINERY Wolica Druga 26 23-310 Modliborzyce Lublin Voivodeship It is possible to test the machine on-site. Financing options available through leasing or installments. We arrange transport. jbsmaszyny.pl tel: 664 335 465