Used Printing Table for sale (21,967)

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Y axis working area: 2200 mm Working Table: Flat table Lredjq U D D Hspfx Ad Njg Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 30

Condition: good (used), Year of construction: 1990, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,250 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,500 mm, table width: 1,500 mm, feed rate X-axis: 2,800 m/min, feed rate Y-axis: 2,800 m/min, feed rate Z-axis: 2,800 m/min, rotational speed (min.): 1,120 rpm, Table type boring mill TOS VARNSDORF - W100A MACH-ID 9351 Ledpjycvc Ssfx Ad Nerg Make: TOS VARNSDORF Type: W100A Year: 1990 3 axis TESLA NS 114  digital read out Tailstock Face plate 800 mm Distance faceplate to boring bar rest 2800 mm Max. diameter off facing 900 mm Under power inspection possible X - Travel: 1600mm Y - Travel: 1120mm Z - Travel: 1250mm W - Travel: 900mm Table Length: 1500mm Table Width: 1500mm Table load: 3000 Speeds / ranges:1120Rpm Power: 11kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:2800mm/min. Feed rate Y-Axis:2800mm/min. Feed rate Z-Axis:2800mm/min. Feed rate W-Axis:2800mm/min. Length: 6710mm Width: 3000mm Height: 3000mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Feed table for a four-sided planer TECHNICAL SPECIFICATIONS: max. workpiece length 5000 mm min. workpiece length 400 mm max. workpiece width 330 mm max. element thickness 120 mm roller motor power 1.1 kW 1.5 kW chain motor power adjustable feed on the inverter 7 guide chains 13 steel feed rollers Lrsdpfohtq Amex Ad Nsg roll diameter 90 mm height of the rollers from the base 820 mm pneumatic pressure height of the rollers from the base 820 mm dimensions (length / width / height) 600/240/155 cm weight ~ 1500 kg

Condition: repair required (used), Year of construction: 1987, functionality: limited functionality, Table milling machine with 2 milling spindles Table size: 1,500 x 800 mm Extendable rail on the table, length 2,500 mm Rail extendable up to approx. 640 mm from table front edge 2 extension pieces for the rail, each L = 850 mm Spindle diameter: 30 mm Usable spindle length approx. 140 mm Spindle 1 height-adjustable with mechanical digital display Spindle 2 height- and side-adjustable, with mechanical digital displays Max. tool diameter approx. 180 mm Distance between spindles approx. 550 mm Milling spindle locking mechanical via lever 2 motors, each 4.5 / 5.5 kW Motors with pole-changing function Forward/reverse operation 6 spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Pneumatic milling spindle braking 2 extraction ports, diameter 120 mm Ljdpfx Aoycq Ayod Nsrg Connection data: 400 V, 50 Hz, 3 Ph, N Additional notes: + Spindles heat up during operation. Therefore, likely necessary to replace bearings (not included in price) + Table insert rings for milling spindles are missing.

Condition: used, Year of construction: 2012, functionality: fully functional, milling spindle length: 130 mm, height adjustment type: mechanical, table length: 2,070 mm, type of input current: three-phase, spindle diameter: 30 mm, spindle speed (max.): 10,000 rpm, extraction connection diameter: 100 mm, input voltage: 400 V, rotational speed (min.): 3,500 rpm, rotational speed (max.): 10,000 rpm, working length of spindle: 130 mm, Equipment: motor brake, – Year of manufacture: 2012 – Austrian production – Spindle adjustable from 0° to 45° – Sliding table for tenoning operations – CE marking TECHNICAL SPECIFICATIONS: – Spindle diameter: 30 mm – Spindle height: 130 mm – Maximum tool diameter (allows use of large milling tools): 230 mm – Maximum tool diameter at 45°: 125 mm – 4 spindle speeds: 3500 / 6500 / 8000 / 10000 rpm – Main motor power: 5.5 kW – Electric motor with brake – Table dimensions (L x W): 780 x 970 mm – Sliding table dimensions (L x W): 2070 x 350 mm – "x-Roll" sliding table – Manual height adjustment – Manual angle adjustment: 0° - 45° – Quick-change spindle system – Fence on carriage – Additional table on carriage – Right/left rotation Lodpsycqiysfx Ad Norg – Extraction port diameters: 100 and 80 mm – Transport dimensions (L/W/H): 220 x 90 x 150 cm – Weight: approx. 350 kg

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: CNLK31350, Toshiba ES-2515AC This is a Toshiba ES-2515AC photocopier in very good condition, offering excellent copy quality with a low meter reading. Counter: 67,000 total copies (including 28K black and white copies, and 18K + 21K low-volume color copies) Options: PCL / PS / Finisher / Scan / Large Capacity / Paper feed unit with 3 cassettes. Technical data: Power supply: 220-240 V, 50-60 Hz Lrodpotxnkgjfx Ad Neg CM SOLUTIONS is now one of the leading French and European specialists in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics at every level of our business, we offer our clients high-performance products at competitive prices. Why do our clients choose CM Solutions? - 28 years of international experience in over 50 countries - 20 major equipment brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta... - A large stock of 2,000 copiers available immediately - A team of qualified technicians Feel free to contact us for more information.

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Lrodpfxsx A E Tfj Ad Nsg Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lrodjxdlx Rspfx Ad Njg Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Xerox Versant 4100 Including: Fiery EX-P 4100 2 x OHCF 2 x HCS Optional: Office finisher + square fold 2-side trimmer! Machine is in perfect working condition! Lrsdjychr Espfx Ad Neg

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: GS000506, Counter: 26‘795‘055 // Speed: 13000 Sheets / h Format: Sheet format max. 370 x 520 mm // min.: 105 x 145 mm Lrjdevw Ai Repfx Ad Njg Print format max: 360 x 520 mm Thickness: max. 0,4 mm Dampening: Alcolor dampening systems with Baldwin BC 713 EF cooling device Powder device: Alphatronic 200 Equipment / further information Ultrasonic double sheet control Heidelberg EasyPlate plate clamping device with automatic plate cylinder positioning for quick plate changes with just one tool. Blanket cylinder with central clamping screw for tensioning at the front and rear edges Automatic blanket and impression cylinder washing device (for normal colors) suitable for conventional and vegetable oil-based washing agents, program-controlled via the control system.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Konica Minolta SD-513 brochure finisher. Item for sale: Lrsdpfxjx D Ab Ae Ad Nsg 1 x Konica Minolta SD-513: Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable Lrjdoycfyajpfx Ad Njg -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm -Weight: 13.3 kg

Condition: excellent (used), Year of construction: 2021, Ref: 11062 . 2021 Horizon SmartStacker Only 1.1m books on the counter! The latest, innovative way to process B2 (20” x 29”) digitally printed sheets to finished format size. Features: Near-line operation with Sheet Feeder – can be operated as a near-line system. Newly designed sheet feeder accommodates B2 (20” x 29”) sheets at up to 4,500 sheets per hour. Finishing Line Controller (FLC) controls all setup and operation of the SmartStacker by use of JDF workflow. Ljdeycb Sropfx Ad Norg Can serve multiple HP Indigo 10000 Digital Press units and other HP Indigo presses. Can be connected directly inline to an HP Indigo 10000 Digital Press. Print submission, print, and sheet processing performed without any manual operation for higher sheet integrity & efficient workflow. Can be connected with an Horizon signature folder, saddle-stitcher or perfect binder to achieve total finishing automation. Specification: Sheet Size (Before Cut) Max. 762 x 530 mm or 30.000" x 20.865" Min. 279.4 x 330 mm or 11.000" x 12.995" Piece Size (After Cut) Max. 381 x 530 mm or 15.000" x 20.865" Min. 100 x 105 mm or 3.940" x 4.135" Sheet Weight Range: Normal Paper: 81.4 to 370 gsm Coated Paper (for Merge Stacker): 90 to 360 gsm Paper Thickness: 4 to 15 pt or 0.1 to 0.381 mm *1 pt=1/1,000" Sheet Stacking: Straight Stack or 10 mm or 0.39" Offset Stack Maximum Stack Height: 254 mm or 10.00" Number of Cuts: 1st Process Unit: 1 to 7 columns (14 cutters) 2nd Process Unit: 1 to 4 rows (8 cutters) Production Speed: Up to 4,600 sheets per hour * Production speed differs depending on number of cuts in 1st Process Unit and type/condition of sheets. * HP Press may need to slow down depending on the sheet condition in case of inline configuration.

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Storage location: Nattheim Lredpfsvvkm Ujx Ad Nsg

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Ljdev Ai N Ujpfx Ad Nsrg

Condition: used, Year of construction: 2004, Saw unit: pivots 45°. Carriage length: 3200 mm. Maximum saw blade diameter: 450 mm. Saw blade bore: 30 mm. Motor power: 7.5 kW. Max. Cutting width: mm Control panel: at eye level Height adjustment: input via keyboard Tilt adjustment: input via keyboard Tilt angle display: digital Cutting width display: digital Table extension length: yes Cross-cutting at the cross stop: 3200 mm Cross stop display: scale Scoring device adjustment: electric Scoring blade: PSV Protective cover: yes End position lock: yes Automatic motor brake: yes Speeds: 2500/3500/5000 rpm Description: Cutting height at 450 sheets, 150 mm Weight approx.: 1180 kg Dimensions: 3200 x 1800 x 1800 mm Extraction diameter: 1 x 80, 1 x 120 mm Storage location: Nattheim Lsdex Ngzajpfx Ad Norg

Condition: excellent (used), Year of construction: 1983, Used machine M.Nr. V130296 Year of manufacture: 1983 Motor data: 380 V - 50 Hz - 13 A Rigid 30 mm spindle Height adjustment via handwheel Forward/reverse operation Extraction ports: 1 x 140 mm - 1 x 100 mm Max. cutter: 250 mm diameter - Max. slotting tool: 400 mm diameter Speed: 3000/4500/6000/9000 rpm Table length: 1200 mm Table dimensions: 900 mm x 280 mm Ledpfx Adoyb T T Ee Nsrg Weight approx.: 950 kg Haffner 3-roller feed Top milling fence with fine adjustment External dimensions W/D/H approx.: 1250/1200/1400 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2004, total length: 3,600 mm, total width: 1,800 mm, total height: 1,750 mm, Weight: 970 kg Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: AB/166667 - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Options: Scoring unit - └ Spindle speed pre-cutter [rpm]: 8500 Ljdpfxjxdlxko Ad Nerg - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 3600mm x 1800mm x 1750mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Lrodju Dbkdjpfx Ad Njg Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Ledpfx Adsya Iuhs Norg Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. Ledpfx Adsxnqt Us Njrg The standard set also includes a special workbench and a metal case with accessories. ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Condition: ready for operation (used), T-Slot Table, T-Slot Worktable, T-Slot Fixture Table 3000 x 1750 mm, Used Machine Lsdpev R Dqvsfx Ad Nsrg Overall Dimensions: 3000 x 1750 x 350 mm Slot Size: 65x27 mm Weight: 3500 kg

Condition: excellent (used), functionality: fully functional, Panel saw Martin T72a Sliding table length: 3200 mm Cutting width to the right: 1250 mm Maximum cutting height: 170 mm Scoring unit Hydraulically adjustable cutting height Hydraulically adjustable cutting angle Right rip fence hydraulically adjustable Saw blade size min/max: 200–500 mm Scoring saw blade: 120 mm Saw blade speed, variable via belts: 2800-4000-5500 rpm Main motor: 5.5 kW Scoring unit motor: 0.75 kW CE certificate Technical documentation Lodsya Hpqspfx Ad Norg

Condition: not inspected (used), table width: 450 mm, table length: 630 mm, T-slots 18 mm. Lrodpfx Aoya Hu Hed Njg

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Ljdpfxoya Dtme Ad Norg