Used Pressure Switch for sale (20,176)

Condition: used, Differential pressure indicator, transmitter, guard, Senso, differential pressure indicator, differential pressure switch -Manufacturer: Fischer, differential pressure switch -Item No.: DE2754K045BP00MW -Basic measuring range: 0 ... 10 mbar Djdpfxjfm T Eyj Ab Tjwf -P max.: 100 mbar -Operating voltage 24 V DC -Dimensions: 100/90/H48 mm -Weight: 0.2 kg

Condition: used, Pressure switch HERION 08210 97 5 87. Dwedpslkcg Aofx Ab Tjf

Condition: used, Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG50UG-6Z MIN -Control range: 2.5-50 mbar Dwodpfx Aegh Dxaeb Tjf -Pmax.: 600 mbar -Dimensions: 115/75/70 mm -Weight: 0.3 kg

Condition: used, Pressure monitor, pressure switch, pressure limiter, gas pressure switch Dwedpfxogh Dxde Ab Tof -Manufacturer: Kromschroder, gas pressure switch -Type: DG6UG-3 -Control range: 0.4-6 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Condition: used, Pneumatic pressure switch -Type: 2KA/96x96/0-10 bar -Setting pressure: 0-10 bar -Number: 4x switches available -Price: per piece Djdjb A Ii Tepfx Ab Tswf -Weight: 0.6 kg

Condition: used, Pressure differential pressure switch -Type: QBM81.B -for flow and filter monitoring in air ducts -Setting range: 50...500 Pa Dwodpfob Hw Drox Ab Tef Technical specifications: -Switching difference: adjustable -Output: EPU 250 V, 1(0.5) A -Weight 0.2 kg

Condition: ready for operation (used), functionality: fully functional, Actuator for Ball Valve (EX Limit Switch) Brand / Model: Masoneilan / Dresser (USA) – Compact II actuator + SV12-111114 limit switch (ATEX Ex d IIB T6, IP66) Application: Automatic opening/closing of ball valves in gas, air, steam, or liquid service (electric / pneumatic control). Dwodpfxjxy Rn Ns Ab Tjf Technical Specification Operating pressure: ≤10 bar Torque: approx. 80–150 Nm (depends on actuator size shown in photos) Temperature range: –40…+85 °C Electrical signal: 30 VDC, 4–20 mA Protection: ATEX / EX certified, flameproof enclosure (Ex d) Ingress protection: IP66 Limit switch: Masoneilan / Dresser SV12-111114 (EX d IIB T6) Typically supplied with: stainless-steel ball valve (DN/PN depending on installation) Condition Very good mechanical state Stainless flanges clean and tight Proper sealing and no corrosion on EX housing Photos confirm intact labels, clear ATEX marking, and correct installation orientation

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. Dsdpfx Aotrdyrjb Towf The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Dodpfxsfz Dvvo Ab Tjwf • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2024, condition: new, Machine was installed at the customer’s site but never commissioned, NEW and with full Breton warranty. Breton GENYA Switch – 5-axis CNC bridge saw with integrated vacuum suction system and tilting table. The Breton GENYA Switch is a state-of-the-art 5-axis CNC saw system with a monolithic design for maximum precision, speed, and flexibility in stone processing. It combines automated cutting processes with an integrated vacuum suction system, enabling fully automatic handling and positioning of slabs – ideal for kitchen countertops, architectural pieces, and complex cuts. Highlights: Monoblock construction – no foundation work required, fast commissioning 5 interpolated axes – for complex geometries, angle cuts, and pockets Suction system – automatic repositioning and optimization of cutting sequence without operator intervention Djdowthlnjpfx Ab Tjwf Exchange table, parallel set-up during main time Camera and CAD import functions – for efficient nesting and cut optimization Automatic tool changer with 10+2 tool positions -SPINDLE MOTOR ISO40 8000 RPM -Hand wheel -BLADE ALIGNMENT UNIT -VEIN MATCHING – permanent license -Linear, fixed tool magazine ISO 40 with 10+2 tool slots -Saw blade head Ø400 mm with ISO 40 tool holder -Max. saw blade Ø600 mm -AUTOMATIC LUBRICATION SYSTEM FOR GENYA -ISO 40 tool holder for milling cutters and drills -Thickness probe -Camera system -Suction system up to 500 kg -Automatic table changer with tilting table Including installation and training. Machine available at short notice.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Dedpfjfz Ax Sox Ab Towf ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Dwodsflpmqspfx Ab Tef User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Dsdsfzrapjpfx Ab Tewf The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Dwjdpsfz A D Nofx Ab Tef • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Siemens 6GK5208-0BA00-2FC2 Industrial Ethernet Switch, serial number: SVPM5207219, unused, 100% functional, scope of delivery as per photos. Dwsdpox Euv Defx Ab Tsf

Year of construction: 2022, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 18521 Description: 2022 Dynaset KPL hardly used for sale. High-pressure water deep cleans the streets and removes sand and dust from the pores in the asphalt. Ready for delivery. Dsdpfewi R S Asx Ab Tswf

Condition: new, Siemens 6GK5208-0BA00-2FC2 Industrial Ethernet Switch, serial number: SVPM6196449, unused, 100% functional, delivery as per photos. Djdpox Euv Refx Ab Tjwf

Condition: new, Siemens 6GK5208-0BA00-2FC2 Industrial Ethernet Switch Serial number: SVPM6196450, unused, 100% functional, delivery as shown in photos Dwjdjx Euwbjpfx Ab Tjf

Condition: new, Siemens 6GK5208-0BA00-2FC2 Industrial Ethernet Switch, serial number: SVPM6196455, unused, 100% functional, scope of delivery as per photos. Dwedpfx Abjx Euwnj Tof

Condition: new, Siemens 6GK5206-2BS00-2AC2 switch module SN VPP6491519, unused, in sealed original packaging, 100% functional, delivery scope as per photos. Dwjdpfsx Euvdox Ab Tsf

Condition: new, Siemens 6GK5206-2BS00-2AC2 switch module SN VPP6437489, unused, in sealed original packaging, 100% functional, delivery scope as shown in photos. Dsdpfex Euu Tjx Ab Tewf

Condition: new, Siemens 6GK5206-2BS00-2AC2 switch module SN VPP6491532, unused, in sealed original packaging, 100% functional, scope of delivery as shown in photos. Dedpfx Aex Euvkob Tewf

Condition: new, Siemens 6GK5206-2BS00-2AC2 switch module SN VPP6491546, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Dodpjx Euvqofx Ab Tjwf

Condition: new, Siemens 6GK5208-0BA00-2FC2 Industrial Ethernet Switch, serial number: SVPM5194798, unused, 100% functional, scope of delivery as shown in the photos. Dwedpfsx Euvwjx Ab Tjf

Condition: new, Siemens 6GK5208-0BA00-2FC2 Industrial Ethernet Switch, serial number: SVPM6196454, unused, 100% functional, scope of delivery as per photos. Dwjdpfxex Euwhs Ab Tjf