Used Precision Drill for sale (10,943)

Condition: used, New: No Field of application: Construction Serial number: A00xxxx Please contact ATS Norway for more information Isdpfx Ahewph D Aj Nstb Please provide reference number upon request: 20517 Specifications: - Unknown model year - 5224 engine hours - 3049 hammer hours - Machine width: 225 cm - Vacuum cleaner - Rod holder - Winch - Pendulum on undercarriage - Undercarriage (see pictures) - Lights - Ready for delivery Description: We have a Tamrock DHA 400S drilling rig for sale. The drilling rig starts and runs, but there is something wrong with the engine. The cause is unknown. Apart from this, everything should work as it should according to the owner. Services have been taken by the owner himself continuously. Some additional costs must be expected. Ready for delivery. Own weight: Width: 255 Hammer hours: 3049 Engine hours: 5224 Model: DHA 400 S

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21885 Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: Iodpfjxy Eyasx Ah Nstb The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg

Condition: used, Year of construction: 2004, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Remote control Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000 Own weight: 12600 Isdsvg Nt Iepfx Ah Njtb Model: 55S

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Engine hours: 5520 Ijdpfsw Ucm Ujx Ah Notb Model: 712HC-01

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder Itjdpfx Aew Rag Dsh Neb L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery.

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Isdpfxjx Anaue Ah Notb Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: 1996 model 1848 hours (I'm a little worried) Iedpfxoxz N Ahs Ah Nstb 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Condition: used, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21854 Specifications: 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Itodpfxjxypt Ro Ah Neb Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135

Condition: used, New: No Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 18477 Description: Atlas ROC 712 H-01 drilling rig is sold as a repiar object as it is in an uncertain condition. It was in use 2 years ago, the owner says. The engine hours on it are 18902 hours and stroke hours are 9771 hours. The drilling rig does not have a compressor. Itjdpex A R Unofx Ah Nob Ready for delivery Own weight: 10000 Model: ROC 712 H-01 borerigg ekt uten kompressor

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21271 Specifications: Extended feed bar, for 14 foot first rod, effective drilling length of 4.2 mp 1 rod. Hose reel construction for better hose handling Upgrading hydraulics for better capacity and energy efficiency Rod handling with 1 rod, drill length up to 7.5 meters New radio control New control system In-cab display for pressure adjustment and monitoring Directional instrument and meter counter HC25 hammer Rod shifter Ready for delivery   Description: We have a Montabert micro drill rn significantly upgraded w/ hc25 hammer and rod changer for sale. The tower has been significantly upgraded to function as it should. The feed beam has been extended to accommodate a 14 foot 1-rod. Which effectively makes the drilling length 4.2 mp 1-rod. Rod changer for 1 rod (12 feet) increases drilling length to 7.5 m. Compressor hydraulic valve Itedpfx Ajxatp Ash Njb can be included for an additional price. The tower is ready for delivery. Own weight: 1 Model: micro borretårn betydelig oppgradert m/ hc25 hammer og stangskifter

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table Itjdpfowa Tc Sox Ah Nsb T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Iedpfex E Ingox Ah Notb Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: used, Year of construction: 1994, High-speed radial drilling machine Donau Danuflex145 Isdpewtq Dysfx Ah Nstb

Condition: excellent (used), Year of construction: 1989, Alzmetall AB 40 SV MK 4 in original condition Infinitely variable speed 60 - 1530 rpm 4-step feed Table 720 x 560 mm Throat 345 mm Itsdpfxeyagxre Ah Nsb Spindle stroke 180 mm Dimensions: H 1.98 m, W 0.72 m, D 1.2 m Weight approx. 650 kg Condition: very good, runs smoothly and quietly, all functions operational. Of course, inspection under power is possible Free loading from D - 88433 Schemmerhofen

Condition: excellent (used), 10 x deep hole drills make Botek 3 pieces 6,5 x 320 mm 2 pieces 10,2 x 190 mm 3 pieces 10,4 x 250 mm 1 piece 1 x 11 x 350 mm 1 piece 11 x 270 mm Isdpfx Ahohl Awds Netb Weight 1,5 kg

Condition: ready for operation (used), Year of construction: 2025, number of axes: 3, Main Drive Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Itedpfx Ahox D Dnks Neb Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Year of construction: 2025, This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information. Application Types Boring & Drilling (Wood) Ijdpfx Ahsx S Sizs Nstb

Condition: good (used), Well-running Schaublin with attachments as per pictures with many shots Iedoyaaztspfx Ah Netb

Condition: used, functionality: fully functional, spindle mount: MK 2, quill stroke: 120 mm, Column drilling machine Gillardon, drilling machine in decent used condition. Manufacturer: Maschinenfabrik Wilhelm Gillardon II Bretten i. Baden. According to the information on the attached nameplate, the drilling machine is operated with a motor from VEM Elektromotorenwerke Thurm. Electric motor: three-phase asynchronous motor type KPER 80 K 4, VEM motors Thurm GmbH D Zwickau. Three speed ranges via belt drive. Quill stroke approx. 120 mm, drill spindle with Morse taper 2. Weight approx. 150 kg. Approx. 1380 rpm. MK2 drill column. Power consumption 0.75 kW - mains connection 380 volt, 50 Hz. Price on request / special price. Typographical errors and mistakes excepted with all technical data. Sale exclusively to countries within the EU. Ijdoh N Svlepfx Ah Njtb

Condition: excellent (used), Year of construction: 2004, drilling capacity: 32 mm, column diameter: 200 mm, Heidenhain RADIAL ND 1200 R ; HeidenHain scales HeidenHain measuring probe for: Rectangle target pattern Frame target pattern Circle target pattern  Line target pattern Arm Length: 1000mm Max. drill Ø cast: 32mm Max. tap Ø: 30M Stroke pinole: 240mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Floor / table area: 1370 x 700mm Iedpfx Ahex S H Nvj Notb Speeds / ranges: 1220Rpm Spindle Taper: 4ISO/Bt/Mk Throat: 1000mm Column sleeve: 200mm Quill Ø: 50mm Length: 1400mm Width: 720mm Height: 1900mm Weight: 1200kg

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,650 mm, table load: 6,000 kg, spindle diameter: 125 mm, spindle speed (min.): 7 rpm, spindle speed (max.): 1,000 rpm, table length: 1,400 mm, table width: 1,525 mm, feed length W-axis: 800 mm, overall weight: 18,000 kg, 1 used table-type boring mill Manufacturer: JUARISTI Model: MDR 125 Year of manufacture: 1986 Control: Heidenhain TNC 155 Table size: 1525 x 1,400 mm Table rotation: 360 degrees Travels X-Y-Z-W: 2,000-1,500-1,650-800 mm Spindle mount: SK 50 Speed range: 7 - 1000 rpm Feed: 0 - 2000 mm/min Rapid traverse: 5,000 mm/min Table rotation: 1 rpm Power connection: 30 kW Weight: 18,000 kg Control cabinet: 2,500 x 750 x 1,700 mm A large quantity of tooling can be purchased additionally. As a rule, the machine is sold without accessories. Ijdpfx Asxg Imioh Njtb

Condition: new, Year of construction: 2026, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Tischarbeitsfläche: 155 - 415 mm Iedpjulvd Hjfx Ah Nstb Fußarbeitsfläche: 155 – 550 mm Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 491,00 € Werksgarantie: 3 Jahre Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm Isdpehzbipofx Ah Netb - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, The KB 32 SFV PRO is a high-performance Column Drilling Machine from KNUTH, designed to deliver precision and efficiency for various drilling applications. This robust drill press features an automatic feed system and is particularly well-suited for single part productions and manual series work in both workshops and industrial settings. Made from premium high-quality cast iron, the sturdy base, column, table, and gear head ensure excellent rigidity and durability. The heavy, precision-ground work table is equipped with T-slots for optimal setup versatility. With an infinitely variable drive that boasts low maintenance, the KB 32 SFV PRO is complemented by a convenient touchscreen control panel. Operators can easily access functions such as spindle speed control and an electronically controlled quill feed. The integrated coolant system enhances performance, while the standard LED work light ensures optimal visibility. Experience the reliability of this drill press and enhance your operations—request a quote today to add the KB 32 SFV PRO to your drilling equipment lineup in the Column Drilling Machines category. Iedpfx Ahsuyh Unj Nstb

Condition: excellent (used), Year of construction: 2014, bore capacity in steel (diameter) 45 mm arm length 1050 mm Vertikal stroke 450 mm quill stroke 200 mm Itjdpfx Asx Szp Roh Nsb spindle taper MK 4 spindle turning speed range 15 - 2800 U/min transmission ratio 2 distance spindle /table 710 mm weight of the machine ca. 2600 kg dimensions of the machine ca. 3000 x 3000 x 3220 mm