Used Power Unit for sale (61,059)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, total length: 12,200 mm, total height: 2,890 mm, total width: 2,440 mm, power: 1.65 kW (2.24 HP), fuel: diesel, Equipment: type plate available, These are three emergency generators, each with a 2000 kVA capacity and 1600 kW continuous output at a cos phi of 0.8. Voltage: 10 kV, frequency: 50 Hz. A viewing is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamfort Laedpoqqhuyefx Aatoi Design: 40" soundproof container with a sound level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg The data sheet (German and English) is attached. The container also contains a 2,000 L tank for the initial diesel supply. The generators are regularly tested under load.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 2,343 h, functionality: fully functional, machine/vehicle number: 51065506-2, nominal power (apparent): 2,125 kVA, Equipment: documentation/manual, TECHNICAL DETAILS Rated power: 2,125 kVA Generator Manufacturer: Piller Type: NKT 2150-4 Voltage: 400/231 V Lodpfx Asv Tmd Reatoai Frequency: 50 Hz Power: 2,125 kVA Insulation class: F Protection type: IP23 Power factor: 0.8 Speed: 1,500 rpm Current consumption: 3,967 A Turbine Manufacturer: Dresser-Rand Model: KG2-SL3 Rated speed: 1,500 rpm Peak load power: 1,890 kW MACHINE DETAILS Voltage for generator connection: 380 V Transport weight: 10,000 kg

Condition: new, Year of construction: 2025, Powered Load Moving Skates, compact built with low heights and capacities of 10, 24 and 40 tonnes. Intelligent Single-Joystick Control for all movements. Version with integrated lifting cylinder available as well as DUO controll for two powered skates. Please send us your request for a detailed offer. Laodpfsgi Dm Hjx Aatei

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, PANEL BENDER PRIMA POWER AMADA MAX BEND DIM 2550MM MAX BEND HEIGHT 200MM AUTOMATIC LOADING AUTOMATIC UNLOADING AUTOMATIC TOOL CHANGE ASP AUXILIARY BLADES AUT ADDITIONAL TOOL TCS AUTOMATIC TOOL CHANGE Ledpfx Aaevx T Tietoai

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Scrap conveyor was installed on a Laser Next 1530 built in 2019, but was only used sporadically and was eventually dismantled. Ljdsvcpi Ijpfx Aatsai All parts on the belts are the complete attachments to the machine. Prima Power Art. No. D5.57H Steel conveyor belt for automatic turntable. Conveyor length to start of high conveyor: approx. 292 cm, high conveyor length approx. 160 cm. Total length approx. 452 cm. Conveyor height approx. 140 cm. Extension approx. 366 cm. Conveyor belt width approx. 67 cm. Conveyor width approx. 94 cm. Sale ex works without guarantee and return.

Condition: good (used), The Yokogawa 2532 Digital Power Meter / Precision Power Analyzer is a precise measuring device for power measurement. With an accuracy of up to 0.1%, it is perfect for measuring power, voltage, current, frequency and power factor. The device is user-friendly and has an intuitive interface. It is ideal for use in electronics and measurement technology as well as in industry.Double-stabilized and linearly regulated high-precision low-voltage power supply Lodperpz E Sofx Aateai

Condition: excellent (used), Year of construction: 1990, operating hours: 2,343 h, functionality: fully functional, machine/vehicle number: 51065506, nominal power (apparent): 2,125 kVA, Equipment: documentation/manual, Power Generation System 2125 kVA - Gas Turbine Lodpsv E Nd Refx Aatjai Track for liquid and gaseous fuels – Programmed for operation with liquid fuels.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, fuel type: gas, mast type: simplex, TECHNICAL DETAILS Ljdpfxjv S E Sws Aatoai

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Lodpfxsfz Ndys Aatjai

Condition: new, POWER&FREE CONVEYOR SYSTEMS Overhead Power & Free Conveyors have free trolleys that are driven by power chains and carriers that transport the material to a given location. Lasdpfjdy Eyvox Aatsi The carriers are attached to the free trolleys and are normally engaged to the power chain by an attached pusher dog assembly on the free trolley. The pusher dog can be disengaged by a cam action in either the free trolley or the chain dog, caused by accumulating behind another free trolley or by engaging a stop blade. The chain continues to move while the carrier becomes temporarily stationary until the free trolley becomes re-engaged with the chain. Applications Accumulating Assembly Bias & Trias Banking Carrier Indexing Elevation Changes Production Rate Variation Sort Start/Stop Storage Transfer Advantages: High strength alloy castings increase life span Stainless steel chain pusher dog Modular designed conveyor components Stops are simple, compact and corresponding to industry standard Computer or programmable control systems Not possible in standard hanger conveyor systems: • Automatic stop and start of the system with the support of switches and sensors • Transferring the transported material to different directions with the help of the scissors on the rails. • Transport at different speeds in different parts of the conveyor • You can easily perform its controls with the PLC control system integrated on the system. • As long as possible, our designs are made by our expert engineering team with the principle of saving more time for your production, establishing an economical system that requires the least maintenance.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Lajdpfx Aeflrc Ssatoi Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. Ljdpfjfz A H Dex Aatsai There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Transmatic 7360 Sport, input voltage: 400 V, type of input current: three-phase, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, MAKE: TRANSMATIC MODEL: 7360 SPORT CONDITION: VERY GOOD YEAR: 2014 POWER SUPPLY: 400v 3PH AIR SUPPLY: YES Lodpfxov Dpyve Aateai NOTES: *3 MODES * ROLL TO ROLL FABRIC *ROLL PRINT TO PIECE FABRIC *ROLL FABRIC TO PIECE PRINT Designed for digital printing on cut pieces, placed prints, traditional roll-to-roll printing. This application is especially suitable in the sports T-shirt printing industry. A new oil heating system ensures uniform temperature distribution over the entire length of the cylinder with minimal energy consumption. Transmatic’s oil heating systems consume 50% less energy than electric machines.nThis calender has 3 different ways of operation. 1)Transfer papers are placed with the design facing upward on the table. Cut fabrics (fronts, backs, arms, necks, etc.) are placed on top of the pattern. The printed fabric pieces and paper leave the machine via a rear conveyor belt. 2)Use of roll transfer paper with the ability to place cut pieces of fabric. 3)Traditional printing of both transfer paper and fabrics in continuous. Electro-pneumatic felt guide control. No.6 3″ quick-connect shafts. Three friction-driven and three friction-driven and motorized rewinders. Reversing safety bar. n One outfeed conveyor belt cools and carries the printed pieces to the back of the machine to detach them. Automatic machine shut-off system after felt cooling Digital adjustable speed control. Requires compressed air.

Condition: used, mileage: 423,000 km, power: 346 kW (470.43 HP), first registration: 02/2022, fuel type: diesel, empty load weight: 8,052 kg, maximum load weight: 9,948 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: white, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, Equipment: onboard computer, parking heater, traction control, Unladen weight: 8,052 kg, permissible total weight: 18,000 kg, 1st axle: 315/60 R22.5, 2nd axle: 295/60 R22.5, air-air suspension, retarder, electronic braking system (EBS), electronic stability program (ESP), traction control system (ASR), stationary air conditioning, MAN Media Truck, outside temperature display, electrically adjustable exterior mirrors, kerb mirror, tinted glazing, aerodynamic package, refrigerator, cup holder, rubber flooring. Errors and changes excepted. Vehicle offered on consignment. Vehicle location: Budapest, Hungary. Ljdpfsxyu Efjx Aatsai

Condition: used, length 710 mm height 580 mm ampere bis 500 Lasdpfsvmih Esx Aatei Power connection 60% ED: 27,5 kVA Power connection 100 % ED: 21,4 kVA welding current stepless ja/yes voltage 380 V weight of the machine ca. 93 Kg dimensions of the machine ca. 1 x 1 x 2 m Electric welding machine on a rolling shelf with accessories such as hose package, plenty ofelectrodes, protective visor. It is suitable for electrode welding. The device was only ever used in a repair shop 3 times a year, so it was only used very little. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2005, functionality: fully functional, 1,0 St. gebr. Temperiergerät Lasdsxyt Tzopfx Aatei Hersteller: REGLOPLAS Typ: P160/9/SG51/1K/RT50 Baujahr: 2004 Medium: Wasser Temperatur: 160° C

Condition: used, mileage: 1,073,217 km, power: 324 kW (440.52 HP), first registration: 07/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: grey, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, navigation system, parking heater, PTO, stability control assistant, ABS, ASR, rear axle differential lock, engine brake, multifunction steering wheel, navigation system, air conditioning, auxiliary heater, heated and electrically adjustable exterior mirrors, electric windows on driver's and passenger's doors, electrically operated sliding sunroof, driver's comfort suspension seat, single sleeper berth, refrigerator box, fog lights, hydraulic connection for two-circuit semi-trailer, air suspension with rear axle lifting/lowering function, vehicle may be wrapped or marked with advertising. Our offer is generally without a new MOT (TÜV) inspection. If a new MOT (TÜV) inspection is required, we are happy to provide you with an offer from our partner workshops! The vehicle may be wrapped or marked with advertising. Our general terms and conditions for delivery and payment apply. Lodpfx Aaoxyn Histsai We are happy to prepare a financing or leasing offer tailored to this vehicle for you. Please contact us!

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Ljdpexymd Tjfx Aatoai Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: used, mileage: 194,075 km, power: 375 kW (509.86 HP), first registration: 09/2023, fuel type: diesel, empty load weight: 8,048 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: VEB, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, front tire size: 315/60 R22.5, rear tire size: 295/60 R22.5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, compressed air brake, cruise control, differential lock, onboard computer, parking heater, truck registration, Volvo FH 500 | Leather steering wheel | EURO6 | Refrigerator | Hands-free system, multifunction steering wheel | Auxiliary heater, seat heating | Electric windows, electrically adjustable and heated mirrors | Parking air conditioning | CB radio, Radio/CD | Subject to errors, input mistakes, and prior sale. Laedpexyku Asfx Aatoi

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm Lasdexn U Rqepfx Aatsi

Condition: used, Year of construction: 2001, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Typ: P140/9/SG51/1K/RT50 Baujahr: 2004 Medium: Wasser Temperatur: 140° C Heizleistung: 9 kW Laedpfx Asxyt Tnjatei

Condition: used, mileage: 600,868 km, power: 301 kW (409.25 HP), first registration: 04/2002, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: mechanical, emission class: euro4, Equipment: ABS, air conditioning, EFFER medium-duty crane, type: 335 5S, with 4-way hydraulically extendable and supportable outriggers, 5 hydraulically extendable boom sections, Scanreco remote radio/wired control, outreach: approx. 15.1 m – max. lifting capacity approx. 1.64 t. Load diagram: approx. 4.57 m – 6,250 kg; 8.84 m – 3,000 kg; 13.10 m – 1,921 kg; 15.08 m – 1,639 kg. Technically possible: crane with 3 mechanical extensions up to 17.28 m – 1,340 kg; 19.53 m – 1,100 kg; 21.98 m – 921 kg outreach. Fifth wheel coupling hydraulically adjustable longitudinally. NATO jump-start socket. PM2 particulate reduction system retrofitted (type: DPFNL). PTO, ABS, ASR (traction control), engine brake, cruise control, rear axle differential lock, hill start assist, analog tachograph, air conditioning, driver comfort suspension seat, heated and electrically adjustable exterior mirrors, electric windows on driver's and passenger's side, 1x sleeper berth, refrigerator, roof hatch, central lubrication system, headlamp cleaning system, fog lights, 2x rotating beacons, air horns on cab roof, vertical exhaust, air suspension with raise/lower function on rear axle, 3rd axle – lift axle. Vehicle may be stickered and/or lettered with advertising. Our offer is generally without new TÜV inspection. Should you require a new TÜV inspection, we will be happy to provide a quote from our partner workshops! Vehicle may be stickered and/or lettered for advertising purposes. Our general terms and conditions for delivery and payment apply. Ledpfsxycclox Aatjai We will gladly prepare a financing or leasing offer for this item. Please contact us!

Condition: used, mileage: 568,280 km, power: 375 kW (509.86 HP), first registration: 09/2021, fuel type: diesel, empty load weight: 8,276 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: VEB, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, front tire size: 315/60 R22.5, rear tire size: 295/60 R22.5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, spoiler, truck registration, Volvo FH 500 Mega | EURO6, I-Shift | Refrigerator, 2 tanks | Hands-free system, multifunction steering wheel | Auxiliary heater, heated seats, stationary air conditioning | Electric windows, heated electric mirrors | CB radio, radio/CD, navigation | Full air suspension | Subject to errors, input mistakes and prior sale. Lsdpfx Aexykuveatjai

Condition: used, Year of construction: 2001, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Typ: P140/9/SG51/1K/RT45 Ledpfx Aaexyt Tbstoai Baujahr: 2001 Medium: Wasser Temperatur: 140° C Heizleistung: 9 kW

Condition: used, mileage: 1,600 km, power: 375 kW (509.86 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 8,998 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, truck registration, | Mercedes Benz Arocs 1851 4x4 Agromover | ABS, ASR, electric windows, cruise control | automatic, EURO6, air conditioning, auxiliary heating, | heated seats | refrigerator | high roof | retarder | tires 445/65/22.5 | Subject to input errors, mistakes and prior sale. Lasdpjxyktxofx Aatji