Used Post Reamers for sale (3,352)

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. Bwjdod Etagjpfx Acysw The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: good (used), We have numerous Multifix Toolpost, size C in various versions in stock. Partly also with a drill and chisel. Accurate data and requests please ask. Boded Ha Nfspfx Acyjww Also in larger quantities.

Year of construction: 2018, condition: excellent (used), Max sheet size: 1080 x 780 mm Max single product to take out: 450 x 450 mm Min single product to take out: 30 x 30 mm Paper pile height: 40 - 100 mm Bjdpfx Aceu I U N Uoyeww

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor Bedsnzhxqjpfx Acysww B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: excellent (used), functionality: fully functional, Conveyor belts for weak roundwood / poles / rods, etc. 1 piece = 5,000 mm length, 280 mm belt width, with double transport rollers. Bwjdpfjwut Nhjx Acyow 1 piece = 6,500 mm length, 240 mm belt width, with trough under the belt. 1 piece = 3,950 mm length, 300 mm belt width, with double transport rollers.

Condition: new, power 4,0 (5,45) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 880 mm Bjdob Nvn Tepfx Acyoww width 735 mm height 1 540 mm weight 70 kg material varnished steel discharge height 450 mm suitable for branch diameter up to 50 mm

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. Bwsdpfx Aed Etadscyow The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: like new (used), Year of construction: 2016, functionality: fully functional, SPECIFICATION • Steel construction • Rubber covered roller with spiral groove for guiding the sanding belt Pneumatic belt tensioning • Automatic belt oscillation • Belt centering device • Feed unit operated by pneumatic rollers controlled via an inverter • Pneumatic cylinder with balanced adjustment for even pressure Bwedpfx Acsw D Dqueyow TECHNICAL DATA • Sanding belt motor: 5.5 kW • Feed unit motor: 0.25 kW • Minimum curve radius: 350 mm • Performance 300 pcs/hour • Machine dimensions: 850 x 1500 x 1700 (h) mm • Machine weight: 450 kg According to CE rules In compliance with CE safety rules

Year of construction: 2023, operating hours: 70 h, condition: as good as new (ex-display), functionality: fully functional, JT RecTec - eTurner 380 Bwodpem H T Sxofx Acyow YEAR OF MANUFACTURE 2023 approx. 70 operating hours - Width of windrow max 3,8m - Windrow height max 1.8m The world's first battery-powered compost turner that aerates your compost heaps autonomously and thus produces a high-quality product without CO² pollution.

Year of construction: 2002, operating hours: 2,800 h, condition: used, functionality: fully functional, Komptech X-53 compost windrow turner, in good condition. Width 5 m, height 2.2 m. New knives on the drum. Bwodpfxewyvhdj Acysw

Condition: reconditioned (used), Year of construction: 2003, Drilling machine for Newel Posts. Without adjusting the machine your can drill 2 Newel Posts for mounting one Newel Post up on the other with dowel connection. The renovation of the machine is still going on. Bwedpfsg U U D Rex Acyow

Condition: excellent (used), Comec orbital sander LC/15AV Workpiece diameter min/max 10-100mm 5.5kw main motor Feed motor with power 2×0.25kw 3 feed speeds Grinding belt dimensions 1220x70mm Bjdpfx Aevb E Tajcysww

Condition: new, Year of construction: 2025, - Yield 3-4 tons/hour - Hopper capacity 2 m³ (heaped) - Overall dimensions L 260cm x L 210cm x H 225cm - Total weight is about 400 Kg - Precision weighing +/- 50 grams - Possibility to prepare bags from 1 to 50 kg *, limit of the weighting scale it's 150Kg - Wiring for power line connection - Manual tilting gate to regulate the quantity in outflow - Vertical tilting scale support to adjust the height based on the bags used - Reduction of the discharge mouth (2 outlets, oner for small bags and one for big bags) - Special non-slip rubber conveyor belt - Vibrator under hopper in case of clogging - Agitator inside the hopper - Roller for move the bags - 400V three-phase power supply Bedpef Dq N Eofx Acyoww - Instruction manual - Made in EU

Condition: used, Year of construction: 2023, operating hours: 1,000 h, Self-propelled compost turner for the treatment of organic waste such as green waste, bio waste or microbiologically contaminated soils. Bodpfx Acsizku Eeyoww JT630, semi-autonomous - windrow width up to 6.30 m - windrow height up to 2.9 m - radio-controlled with semi-autonomous functions - up to 25% fuel savings - Easy to transport and quickly ready for use

Condition: new, Telephone cable - data cable consisting of 7 rolls: Cable J-ZY (ST) Y 2 x 2 x 0.6 Weight including roll 7.5 kg Cable Giga Speed 3500 Type A-DQ (2N) B2Y 12 G50 / 125 Weight including roll 70 kg Cable (500m) A-2Y (L) 2Y 10 x 2 x 0.6 Bd Weight including roll 77 kg Cable A-2Y (L) 2Y 10 x 2 x 0.6 Bd Weight including roll 51.5 kg Bodpfjvx E Dtox Acyjww Cable A-2Y (L) 2Y 2 x 2 x 0.6 Weight including roll 49 kg Cable S - 09YS (ST) CH 8 x 2 x 0.6 ST BD Weight including roll 55.5 kg Cable S - 09YS (ST) CH Weight including roll 14 Kg

Year of construction: 1988, condition: used, - working length max. (mm): 3100 - profile height max. (mm): 200 Bwjdpfekx Hpaox Acyow

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center width: 1,000 mm, center height: 180 mm, controller model: FANUC Oi-MATE, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect by 20/11/2025! TECHNICAL DETAILS Centre height: 180 mm Centre distance: 1,000 mm Spindle mount: DIN 55027 Gr. 5 Spindle bore: 42 mm Tool holder: electric 4-position tool post MACHINE DETAILS Bjdpfjxrchfsx Acyjww Control model: FANUC Oi-MATE Weight: approx. 1,110 kg EQUIPMENT Quick-change chuck FAHRION SFF 40/5 (taper size 5)

Condition: ready for operation (used), functionality: fully functional, No reserve price - guaranteed sale at the highest bid! Bsdsxnzvaopfx Acyjww

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 311190, No minimum price - guaranteed sale to the highest bidder! Bsdpfx Ajxpxdqocyjww MACHINE DETAILS Number of stations: 4 EQUIPMENT Cover sheet feeder Delivery unit

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,430 h, functionality: fully functional, machine/vehicle number: MMZO 531 524, product height (max.): 5 mm, product length (max.): 480 mm, product width (max.): 320 mm, production capacity: 14,000 unit/h, The electronics and EPS were renewed in 2018! The machine is equipped as follows: - 1 x UG feeder - 9 x rotary feeders - 1 x card gluer TECHNICAL DETAILS Bsdpoxn R U Esfx Acyoww Format (maximum): 480 x 320 mm Format (minimum): 153 x 108 mm Product thickness: 3 – 5 mm Performance Maximum mechanical speed: 14,000 cycles/h Production speed Post-fold: max. 14,000 units/h Pre-fold: max. 9,000 units/h Suction opening: max. 12,000 units/h MACHINE DETAILS Operating hours: 19,430 h Note: The positions 6 & 22 indicated in the legend are no longer for sale. The legend can be found in the attached machine layout.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 207000044, paper weight (min.): 50 g/m², paper weight (max.): 300 g/m², production capacity: 19,680 unit/h, Original price of the printer: €143,250! Production printer with the following configuration: - Input Interface Module-B1 - Paper Input Module Standard-B1 - Paper Input Module Optional-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Printing speed A4: up to 328 pages/minute Printing speed A3: up to 171 pages/minute Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Paper Specifications Paper weight (overall range): 50 gsm – 300 gsm Uncoated paper (Canon recommended media): 50 – 300 gsm Coated media (Canon recommended media): 80 – 250 gsm Paper size: 203 x 203 mm to 350 x 500 mm MACHINE DETAILS Main unit dimensions Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Main unit weight: 779 kg Bwjdpfx Acjxtacvsyow Meter Readings A4 simplex: 173,028 A4 duplex: 58,200,255 A3 simplex: 11 A3 duplex: 3,424 SYSTEM CONFIGURATION - 4x Paper Input Module - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No minimum price – guaranteed sale to the highest bidder! Bsdpfjxm Txkjx Acyoww The payment deadline for the machine is 20.11.2025! Bidding obligates you to timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool data Tool magazine: 46 positions Tool holder: ISO-B40 Travel distances X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilting table diameter: 800 mm Rotary axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load during transport (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Power-on hours: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Note: The tool holders shown in the pictures are included in the sale and delivery. The tools clamped in the holders, such as drills, reamers, end mills, etc., are not included in the sale and delivery. The drive for the head tilting axis is missing.

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock Bwjdpew Dvv Aofx Acyew - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, spindle bore: 102 mm, turning length: 2,000 mm, turning diameter over bed slide: 554 mm, center height: 284 mm, spindle speed (max.): 1,800 rpm, No reserve price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Bidding obligates prompt collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over cross slide: 370 mm Swing diameter over bed and carriage wings: 554 mm Swing diameter in the gap: 830 mm Bodpexm Sm Hefx Acyoww Turning length: 2,000 mm Centre height (over bed): 284 mm Length in front of face plate: 196 mm Spindle centre height from floor: 1,238 mm Max. working length between centres: 2,152 mm Maximum spindle speed: 1,800 rpm Centre distance: 2,032 mm Spindle nose: D1-11 CAMLOCK Spindle bore taper: No. 5 MT Spindle bearing diameter: 145 mm Spindle bore: 102 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,800 x 1,800 mm Total weight: 4,250 kg EQUIPMENT Toolpost

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 6970-06, turning diameter: 480 mm, turning diameter over top slide: 240 mm, center height: 240 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Submitting a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Turning diameter: 480 mm Swing diameter over cross slide: 240 mm Turning length: 1,000 mm Spindle bore: approx. 63 mm Spindle speed: 11–2,240 rpm Centre height above bed: 240 mm Centre height above carriage: 140 mm Turning diameter over carriage: 240 mm MACHINE DETAILS Electrical Data Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,200 x 1,800 mm Weight: 3,000 kg EQUIPMENT Tailstock Steady rest Toolpost Four-jaw chuck, diameter 250 mm Three-jaw chuck, diameter 250 mm Three-axis digital readout Various tool holders Centres Bedpfxoxm Sizj Acyjww Taper